渤黄东海底摩擦系数数值研究

使用伴随同化方法探讨了四种底摩擦系数处理方法并模拟了渤黄东海的M₂分潮.理想实验表明:伴随同化方法有很强的反演底摩擦系数的能力;为了得到较好的反演结果,反演策略必须与给定的分布一致;如果给定分布很复杂,则需要复杂的反演策略.实际实验表明,底摩擦效应与地形密切相关,而海洋地形十分复杂,故需要较多的独立的底摩擦系数才能得到较好的模拟结果.本文的第四种方法将每一点均作为独立的底摩擦系数,在实验中获得了成功,验证了这种方法的合理性和有效性.     

再装股票期权的Esscher变换定价

近年来,公司为了吸引和激励股票的执行者而引入了一系列的非传统期权.本文将讨论其中的一种:再装期权,运用Esscher变换给出了再装期权(只装一次)的闭式解,并提供了数值计算的例子,为实践者提供了理论上的参考价格.     

会聚光在柱状模拟生物组织中的实验研究

在中空的柱状有机玻璃中充入Intralipid-10%溶液构成单层圆柱模拟样品.在会聚单色光入射Intralipid-10%溶液的情况下,利用特制的光纤探头、锁相放大器、斩波器和微动平台等组成测试装置,测量了柱状Intralipid-10%溶液内后向散射光、能流率的空间分布情况,并对测量结果进行分析.对参量不同的溶液中的光分布进行了比较,得出了柱状溶液中光分布的初步规律.     

近红外光谱法测定紫花苜蓿青贮鲜样的营养价值

应用近红外光谱技术(NIRS)直接分析新鲜饲草的营养价值,如饲草中干物质(DM),粗蛋白(CP),中性洗涤纤维(NDF),酸性洗涤纤维(ADF)含量,对畜牧业生产具有重要意义。鲜草中由于含有较多的水分,不易制备均一的样品和进行光谱中有用信息的提取,因此难于进行近红外光谱分析。本试验应用偏最小二乘回归法(PLS)、傅里叶变换近红外光谱技术和液氮冷冻制样技术,建立了适合于不同品种,不同生育期,不同茬次和不同青贮方法即时测定青贮苜蓿鲜样中DM,CP,NDF,ADF的模型,以期对NIRS在测定紫花苜蓿青贮鲜样品这些成分测定的可行性进行分析。所建DM,CP,NDF和ADF模型的交叉检验决定系数(R2_cv)为0.884 6～0.989 8,交叉检验标准误(RMSECV)为3.9～9.7 g·kg-1鲜重。用50个样品对模型进行外部检验,预测相关系数(r)为0.939 7～0.994 9,预测标准误为1.9～8.3 g·kg-1鲜重。结果表明： 采用适当的样品处理方法和光谱分析技术可以实现近红外光谱技术对苜蓿青贮鲜样的营养价值评定。     

The effect of glottal angle on intraglottal pressure

Intraglottal pressure distributions depend upon glottal shape, size, and diameter. This study reports the effects of varying glottal angle on intraglottal and transglottal pressures using a three-dimensional Plexiglas model with a glottis having nine symmetric glottal angles and a constant minimal glottal diameter of 0.06 cm. The empirical data were supported by computational results using FLUENT. The results suggested that (1) the greater the convergent glottal angle, the greater outward driving forces (higher intraglottal pressures) on the vocal folds; (2) flow resistance was greatest for the uniform glottis, and least for the 10 degrees divergent glottis; (3) the greatest negative pressure in the glottis and therefore the greatest pressure recovery for diverging glottal shapes occurred for an angle of 10 degrees; (4) the smaller the convergent angle, the greater the flow resistance; (5) FLUENT was highly accurate in predicting the empirical pressures of this model; (6) flow separation locations (given by FLUENT) for the divergent glottis moved upstream for larger flows and larger glottal angles. The results suggest that phonatory efficiency related to aerodynamics may be enhanced with vocal fold oscillations that include large convergent angles during glottal opening and small (5 degrees - 10 degrees) divergent angles during glottal closing.     

A carbon–LiFePO<Subscript>4</Subscript> nanocomposite as high-performance cathode material for lithium-ion batteries

A cathode material of an electrically conducting carbon–LiFePO₄ nanocomposite is synthesized by wet ball milling and spray drying of precursor powders prior to a solid-state reaction. The structural characterization shows that the composite is composed of LiFePO₄ crystals and 4.8 wt.% amorphous carbon. Galvanostatic charge/discharge measurements indicate that the composite exhibits a superior high energy and high cycling stability. This composite delivers a discharge capacity of 159.1 mAh g⁻¹ at 0.1 C, 150.8 mAh g⁻¹ at 1 C, and 140.1 mAh g⁻¹ at 2 C rate. The capacity retention of 99% is achieved after 200 cycles at 2 C. The 18,650 cylindrical batteries are assembled using the composite as cathode materials and demonstrate the capacity of 1,400 mAh and the capacity retention of 97% after 100 cycles at 1 C. These results reveal that the as-prepared LiFePO₄–carbon composite is one of the promising cathode materials for high-performance, advanced lithium-ion batteries directed to the hybrid electric vehicle and pure electric vehicle markets.     

连续变量1.34 μm量子纠缠态光场的实验制备

设计研制了连续单频671 nm/1342 nm双波长激光器,并通过模式清洁器降低了激光器额外噪声.利用该低噪声连续单频激光器抽运由Ⅱ类准相位匹配晶体构成的双共振非简并光学参量放大器,实验制备出纠缠度达3 dB的光通信波段1.34μm连续变量量子纠缠态光场.该波段量子纠缠态光场在光纤中传输损耗低且相散效应小,与现有的光纤通信系统相兼容,可用于实现基于光纤的实用化连续变量量子通信.     

混有协同自适应巡航控制车辆的异质交通流稳定性解析与基本图模型

针对传统车辆和协同自适应巡航控制(cooperative adaptive cruise control,CACC)车辆构成的异质交通流,研究其稳定性与基本图模型.应用实车测试验证的CACC模型和智能驾驶员模型(intelligent driver model)分别作为CACC车辆和传统车辆的跟驰模型,建立异质流稳定性解析框架,研究不同平衡态速度、不同CACC车辆比例时的异质流稳定性.推导异质流基本图模型,并进行数值仿真实验.研究结果表明,在传统车辆稳定的速度范围,异质流处于稳定状态.在传统车辆不稳定的速度范围,CACC车辆比例增加以及平衡态速度远离9.6—18.6 m/s速度范围,均能够改善异质流的不稳定性.通行能力随着CACC车辆比例的增加而提高.此外,CACC模型的期望车间时距越大,异质流稳定域越大,但通行能力降低.因此,恒定车间时距CACC控制策略下的期望车间时距取值应权衡异质流稳定域和通行能力两个方面的影响.     

基于PXI总线的阵列探测器数据获取系统

描述了一种适用于阵列探测器的数据获取系统。系统基于PXI总线, 采用标准NIM插件作为前端电子学。系统软件采用C/C++语言编写, 在线分析通过调用ROOT类库实现, 系统运行在Linux操作系统下。多次测试结果表明, 系统稳定可靠, 单个ADC通道可以处理的最大事例率为40 kHz。A data acquisition system for array detectors is described. The system is based on PXI bus with standard NIM modules used as front\|end electronics. The system software is written in C/C++ language with its online analysis modules realized by ROOT class library. Several runs of the system under Linux show that it is reliable and is capable of handling event rates up to 40 k events/s for 1 ADC channel.     

动态法测量材料的磁电效应

根据动态法测量磁电效应的基本原理,优化设计并建立了磁电效应测量系统,对其中的一些重要参数对磁电效应测量的影响进行了研究.结果表明,综合考虑测量需要,选择适当的测量参数,对于磁电效应的正确测量十分重要.适当增加线圈长度、减小线圈匝数以及减小交变磁场场强,都是提高磁电效应测量精度、减小测量误差的有效途径.