二阶线性微分方程的解法改进

本改进了二阶线性微分方程的朗期基解法，只要求出转化以后的一阶微分方程或二阶齐次线性微分方程的一个特解，即可求出二阶线性微分方程的通解。     

用定义求解高等数学中的有关问题

应用导数的定义，为分段函数的分界点提供了一种行之有效的求导方法，利用微分的定义判断函数在分界点及其他特殊点的可微性，运用定和分的定义求一类特殊类型的极限．     

"全反射"与课堂教学素质化

素质教育的主阵地是课堂教学.如何切实做到物理教学素质化呢?下面结合“全反射”的教学,谈几点看法和做法.1 课堂教学目标构建的多元性 课堂教学强调目标构建的多元性,以完成教学多方位的艰巨任务,这是素质教育的重要教学特征之一.因而在制定具体的物理教学目标时,既要有知识、技能方面的要求,     

Effect of track stiffness on vibration levels in railway tunnels

The paper discusses the difficulties in comparing and drawing conclusions from vibration measurements made in different railway tunnels. A number of new measurements are presented, which have been made and analyzed on a consistent basis. The track stiffness has been determined for each of the measurements. Graphs are presented which indicate the level of rail and tunnel floor vibration likely to occur for different track stiffnesses. The variance in the measurement results also indicates the potential error in using the data to predict vibration levels in new situations.     

New Synthetic Method for Industrial Manufacture of Glutaric Dialdehyde

A new synthetic method for the manufacture of glutaric dialdehyde is investigated. Glutaric dialdehyde was prepared by the addition-hydrolysis reaction of benzimidazolium salt with saturated dihalide as the di-Grignard reagent. The yield of glutaric dialdehyde by this method can reach 73%. Both infrared spectra and melting point of the compound were consistent with those reported earlier. Translated from Journal of Northwest University (Natural Science Edition), 2005, 35(2) (in Chinese)     

On the use of enzyme adsorption and specific hydrolysis rate to characterize thermal-chemical pretreatment

Applied Biochemistry and Biotechnology - The pseudo enzyme adsorption isotherm of the pretreated substrate is used to estimate the pretreatment’s effectiveness in generating accessible...     

带作用的群系的临界结构

在本文中，我们讨论了带作用群的群系的临界结构，给出了处理允许某些作用群的群的问题的一般方法，作为应用，我们特别给出了关于幂零群及ｐ－幂零群的一些结果。     

控温相变免疫分析测定雌酮

通过热引发聚合与氧化还原引发聚合，合成水凝胶，作为雌酮全抗原(E1— BSA)载体；以异硫氰基灾光素标记雌酮的单克隆抗体(McAb)作为示踪剂，建立了控温相变竞争免疫分析测定雌酮(EI)的方法并应用于分析血清样品。实验表明：以热引发聚合合成的水凝胶为载体的荧光免疫分析方法具有更高的灵敏度，它的线性范围为10-700μg/L，检出限为1μg／L(n=10，3倍空白)。经水凝胶性质的比较(包括LCST、非特异性吸附、抗原与抗体反应时间及固定化抗原活性)，证明了热引发聚合的水凝胶较氧化还原引发聚合的水凝胶更适合于作为免疫分析的载体。     

CRYSTAL STRUCTURE AND MORPHOLOGY OF NASCENT SAMPLES OF SYMMETRIC AROMATIC POLYESTERS——Ⅱ. POLY(p-PHENYLENE 2,6-NAPHTHALATE)

Confined thin film melt polymerization (CTFMP) of naphthalene chloride/hydroquinone (NCMQ, 1/1, molar)mixtures at polymerization temperatures (T_p) below ca. 300℃ resulted in relatively thick, elongated crystals. Polymerizationof NC/HQ above 300℃ between glass yielded well-formed lamellar crystals ca. 100 A thick. Phase Ⅰ and Ⅱ [001] EDpatterns were obtained for all T_p, the relative amount of phase Ⅰ increasing with T_p. Polymerization of naphthalenedicarboxylic acid/hydroquinione diacetate 1/1 mixtures at high T_p also yielded lamellar crystals that "curled up" off of thesubstrate. When the high temperature CTFMP polymerization was conducted between mica, aggregates of lamellae on-edgedeveloped but epitaxial growth did not occur. Epitaxial growth of lamellae between mica could be obtained, however, byconfined thin film solution polymerization, with both of the latter samples yielding apparently related ED patterns from adifferent unit cell than phase Ⅰ or Ⅱ. Fiber patterns, obtained from sheared samples, indicated considerably greater crystaldisorder than in the nascent crystals. Refinement of the phase Ⅰ unit cell parameters, based on the [001] and [01 1] EDpatterns, with modeling based on Cerius~2, suggests a monoclinic phase Ⅰ unit cell with a = 7.76, b = 5.71, c = 14.99 A, α = γ= 90°, β= 99.7°, ρ = 1.47 g/cm~3, space group P12_1/al.     

Kinetics of phenyl radical reactions with propane,n‐butane,n‐hexane,and n‐octane: Reactivity of C6H5 toward the secondary C?H bond of alkanes

The kinetics of C₆H₅ reactions with n‐C_nH_2n+2 (n = 3, 4, 6, 8) have been studied by the pulsed laser photolysis/mass spectrometric method using C₆H₅COCH₃ as the phenyl precursor at temperatures between 494 and 1051 K. The rate constants were determined by kinetic modeling of the absolute yields of C₆H₆ at each temperature. Another major product C₆H₅CH₃ formed by the recombination of C₆H₅ and CH₃ could also be quantitatively modeled using the known rate constant for the reaction. A weighted least‐squares analysis of the four sets of data gave k (C₃H₈) = (1.96 ± 0.15) × 10¹¹ exp[?(1938 ± 56)/T], and k (n‐C₄H₁₀) = (2.65 ± 0.23) × 10¹¹ exp[?(1950 ± 55)/T] k (n‐C₆H₁₄) = (4.56 ± 0.21) × 10¹¹ exp[?(1735 ± 55)/T], and k (n?C₈H₁₈) = (4.31 ± 0.39) × 10¹¹ exp[?(1415 ± 65)T] cm³ mol^?1 s^?1 for the temperature range studied. For the butane and hexane reactions, we have also applied the CRDS technique to extend our temperature range down to 297 K; the results obtained by the decay of C₆H₅ with CRDS agree fully with those determined by absolute product yield measurements with PLP/MS. Weighted least‐squares analyses of these two sets of data gave rise to k (n?C₄H₁₀) = (2.70 ± 0.15) × 10¹¹ exp[?(1880 ± 127)/T] and k (n?C₆H₁₄) = (4.81 ± 0.30) × 10¹¹ exp[?(1780 ± 133)/T] cm³ mol^?1 s^?1 for the temperature range 297‐‐1046 K. From the absolute rate constants for the two larger molecular reactions (C₆H₅ + n‐C₆H₁₄ and n‐C₈H₁₈), we derived the rate constant for H‐abstraction from a secondary C? H bond, k_s?CH = (4.19 ± 0.24) × 10¹⁰ exp[?(1770 ± 48)/T] cm³ mol^?1 s^?1. © 2003 Wiley Periodicals, Inc. Int J Chem Kinet 36: 49–56, 2004