Application of carbon nanotubes as solid-phase extraction sorbent for analysis of chlorophenols in water samples

The aim of this work was to investigate the efficiency of various MWCNTs as SPE materials for the preconcentration of chlorophenols. The COOH-functionalized MWCNTs and MWCNTs were used as SPE sorbents. To evaluate the capability of MWCNTs for the preconcentration of chlorophenols from water samples, 2,4-chlorophenol, 4-chlorophenol, 2,4,6-chlorophenol, 2,6-chlorophenol, 3,4-chlorophenol, and 2-chlorophenol were used as model compounds. Chlorophenols were extracted with acetone, methanol, ethanol, and dichloromethane, and determined by gas chromatography–mass spectrometry. COOH-functionalized MWCNTs <8 nm were found to be the best sorbent for the tested chlorophenols. For COOH-functionalized MWCNTs <8 nm, the recovery rates for all chlorophenols were higher than 50% when acetone or ethanol was used as eluents. In the case of dichloromethane elution, recovery rates for chlorophenols were from 62.0% for 2,6-DCP to 116.8% for 2,4-DCP; only for 2,4,6-TCP was the recovery rate 30.6%. Similar percentage recoveries were achieved with methanol as the eluent.     

A practical and step-economic route to Favipiravir

A practical and step-economic route to Favipiravir, an antiviral drug, was developed. Favipiravir was synthesized in only six steps from 3-aminopyrazine-2-carboxylic acid with an overall yield of about 22.3%. Key intermediates 3 and 6 were obtained in excellent purity via recrystallization from optimized solvents, which was beneficial to large-scale production. In the key synthetic reaction, 3,6-dichloropyrazine-2-carbonitrile (6) was reacted sequentially, in one pot, with KF and 30% H₂O₂ to give (after crystallization from 95% EtOH) favipiravir as colorless crystals, with a 60% yield for this final step of the synthesis.     

Antimicrobial activity of newly synthesized thienoquinolizidines derivatives: inspired by natural plant alkaloids

The antimicrobial activity of 16 newly prepared quinolizidines derivatives using bacteria (Staphylococcus aureus, Staphylococcus epidermidis, Proteus sp., Escherichia coli) acid fast bacterium Mycobacterium smegmatis, yeasts (Candida albicans, Candida parapsilosis), and filamentous fungi (Fusarium culmorum, Microsporum gypseum, Aspergillus flavus, Botrytis cinerea, Alternaria alternata) was studied in this paper. The best antibacterial properties were demonstrated by derivatives 11Ba, trans10Bb and 11Bb, and the most sensitive microorganism was found to be the gram-positive bacterium S. epidermidis. The derivative 11Bb showed the best antifungal activity, while C. albicans was resistant to all tested derivatives, and C. parapsilosis was fully inhibited in the presence of the derivative 11Ba and 11Bb. Among the filamentous fungi, only the dermatophyte M. gypseum was partially inhibited. Biofilms represent the most prevalent type of microbial growth in nature and are crucial to the development of clinical infections. Newly synthesized derivatives were also added into the medium throughout the biofilm formation. We have observed a significant decrease of biofilm formation in the presence of quinolizidine derivatives, testifying to their significant antimicrobial activity. It seems that the relationship between antimicrobial activity and the structure is based on the alkaline character due to nitrogen, the saturated basic quinolizidine skeleton, and the position of sulfur in the molecule.     

Batch synthesis of polyoxometalate-based phosphonium compounds by one-step room-temperature mechanochemical process,and their morphology-dependent antibacterial activities

Based on the Keggin-type polyoxometalate and quaternary phosphonium salt, the (MePh₃P) _n -POM_Keggin compounds were synthesized via one-step mechanochemical process at room temperature. It showed the advantages of convenient operation, lower cost, less pollution, and mass production. Wonderfully, the morphology of compounds presented a strong dependence on the number of crystal water in the source heteropoly acids. A hypothesis of ‘semi-solid nonlocalized waters’ was brought to discuss the formation mechanism of polyhedrons. Antibacterial experiments indicate that the samples have good antibacterial activities, which resulted from the increase of the positive electrical charge of the phosphonium cation caused by the polarization by POM groups. Additionally, a formula of inhibitory zone per unit surface area was designed to more precisely evaluate the antibacterial activity of the materials. The calculation result indicated that the polyhedral particles give a higher surface antibacterial activity than the grain powder. This work developed an alternative synthesis method for composites from a new perspective, and will promote the research of new type of antibacterial agent.     

Swelling behaviors of poly(dodecyl methacrylate-co-methyl eugenol) and poly(dodecyl methacrylate-co-methyl chavicol) gels in essential oil components

Poly(dodecylmethacrylate-co-methyleugenol) P(DDMA-co-Meu) and poly(dodecylmethacrylate-co-methylchavicol) P(DDMA-co-Mch) gels were synthesized in ethanol using free radical cross-linking polymerization method at 60 °C for 24 h in the presence of azobisisobutyronitrile (AIBN) and triethylene glycol dimethacrylate (TEGDMA) as initiator and cross-linker, respectively. Scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR) were used to characterize the gels. These gels were used to investigate swelling behaviors in linalool and methyl eugenol, in essential oil mixture of phenyl propanoid and terpenoid, and also in various solvents. While the equilibrium swelling values (ESV) of both gels were higher in linalool than in methyl eugenol, the result was vice versa in the case of essential oil mixture. ESVs of both gels were also obtained in various solvents with different functional groups and the highest ESV of both gels were obtained in toluene, and the lowest ESV of P(DDMA-co-Meu) and P(DDMA-co-Mch) was in methanol and in ethylene glycol, respectively. While P(DDMA-co-Meu) is sensitive to carbon number change in alcohol, P(DDMA-co-Mch) is less sensitive. In the case of esters, increase of carbon number in functional group causes a more significant change in ESV than an increase of carbon number in aliphatic chain. Experimental results were correlated by the first-order and second-order models. The second-order model was more suitable than the other. While P(DDMA-co-Meu) gel swelled in linalool exhibits a Fickian diffusion character, the diffusion mechanism of the gel in methyl eugenol is a non-Fickian one. In the case of P(DDMA-co-Mch), the result is vice versa.     

Utilization of GDOES for the study of friction layers formed on the surface of brake discs during the friction process

The paper deals with the chemical characterization of friction layer, generated on the surface of friction materials during the friction test using the glow discharge optical emission spectrometry (GDOES). Friction layer is formed during the friction process and its character depends on several factors. One of the most important factors is the material composition of brake pads and brake disc. When the brake pressure is released at the end of the braking event, the specific friction layer remains on the surface of both pairs (brake pads and brake disc). Using the GDOES profile analysis, the thicknesses of friction layers were estimated and these results were compared with results obtained by scanning electron microscopy together with X-ray microanalysis.     

Effect of heterocyclic ring system on formation of dimeric quinolones under catalyst-free conditions: a green approach

The intermediate-dependent green and efficient synthesis of dimeric quinolones 4a–l and 7a–l by the Knoevenagel condensation followed by Michael-type addition of 4-hydroxy-1-methylquinolin-2(1H)-one 1a, b to indole-3-aldehydes 2a–f and aromatic aldehydes 5a–l in water through the condensed compound 3a–l under catalyst-free conditions is described. This reaction was found to be environmentally friendly, has easy-workup and shorter reaction times giving good yields of the product without the need for its isolation using column chromatography.     

Synthesis of TiO<Subscript>2</Subscript> nanotubes using different alkaline media and their applications in photocatalysis and DSSCs

TiO₂ nanotubes (TNTs) were successfully synthesized from different alkaline media (i.e., NaOH and KOH) by using a microwave hydrothermal process. The effects of different alkaline media on the formation of TiO₂ nanotubes and their physicochemical properties were investigated. The phases of different TiO₂ nanostructures were studied by using X-ray diffraction patterns. Morphologies of the nanostructures were observed with a transmission electron microscope. The optical properties of the nanostructures were evaluated through the absorption behavior using UV–Vis diffuse reflectance spectroscopy. The photocatalytic activities of the TiO₂ nanostructures were evaluated by the degradation of methylene blue aqueous dye solution under the simulated solar light irradiation. Similarly, the photovoltaic efficiencies of the prepared samples were investigated by making photo-anode layers in the Dye Sensitized Solar Cells (DSSCs). The results revealed that in comparison to the single layered TiO₂ nanostructures in the DSSC, creation of a double layer structure significantly enhanced the efficiency of DSSC.     

Three-dimensionally ordered macroporous metal oxide–silica composite for removal of mercaptan

A series of 3DOM and non-3DOM metal oxide–silica composites were prepared and tested dynamically in a packed-bed reactor at room temperature to remove ethanethiol from a gas stream containing ethyl mercaptan in moist N_2.The obtained sorbents were characterized using X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and nitrogen adsorption–desorption techniques. The experimental results showed that the adsorption ability of different kinds of metal oxide–silica composites with 3DOM structure decreased in the sequence: 3D-CuO/SiO₂ > 3D-NiO/SiO₂ > 3D-Co₃O₄/SiO₂ > 3D-ZnO/SiO₂. The best ratio of CuO to SiO₂ of 3DOM copper–silicon oxide sorbents for ethanethiol removal was found to be 1:2. The 3DOM structure could improve the removal activity of sorbents remarkably because of the high porosity with ordered interconnected macropores as well as the large surface area and high dispersion of CuO. It was also found that a moist atmosphere greatly benefited the adsorption of ethanethiol at ambient condition.     

Understanding Behavior of Polycaprolactone–Gelatin Blends under High Pressure CO<Subscript>2</Subscript>

Polycaprolactone (PCL) is widely used in biomedical applications as electrospun fibers or porous foams. As PCL is synthetic polymer, many researchers have explored blends of PCL–gelatin to combine mechanical and bioactive properties of individual components. High pressure carbon dioxide (CO2) has been studied to foam and impregnate many biocompatible polymers. In case of PCL–gelatin blends, certain compositions can be swelled reversibly under high pressure CO₂ without permanent deformation. This allows successful impregnation of PCL–gelatin blends under CO₂. This study summarizes effect of different treatments adopted during impregnation process including high pressure CO2 on several blend compositions of PCL–gelatin blends. Stress relaxation, polymer melting and dissolution were observed during several treatments which affects porosity and scaffold structure significantly. Results summarized in this study will aid in optimum selection of PCL–gelatin blend composition for biomedical applications. Furthermore, CO₂ solubility in polymers is restricted due to thermodynamic limitations but can be altered in the presence of a co-solvent to produce better foams. PCL can be foamed using supercritical CO₂. However, CO₂ foaming of PCL–gelatin blend becomes challenging to simultaneous swelling of PCL and compression of gelatin providing blend structural stability. This study has demonstrated ability of supercritical CO₂ to foam PCL–gelatin blends in presence of water to create porous structure. These foams were subjected post-fabrication crosslinking and supercritical CO₂ without losing porosity of foams. Thus, creating a strategy to use environmentally benign processes to fabricate, crosslink and impregnate porous scaffolds for biomedical applications.