对-二甲氨基苯甲醛苯甲酰腙及其锌(Ⅱ)、镉(Ⅱ)配合物的合成与光学性质

合成了对-二甲氨基苯甲醛苯甲酰腙(配体)及其锌(Ⅱ)、镉(Ⅱ)配合物,通过元素分析、IR、MS对结构进行表征,研究了配体及锌(Ⅱ)、镉(Ⅱ)配合物的紫外光谱和荧光光谱。这些物质都有较强的荧光,适合掺入涂料中做成荧光涂料。     

阿拉善马先蒿植物中单萜环烯醚甙的研究

阿拉善马先蒿(Pedicularis alaschania maxim)系玄参科马先蒿属植物,民间可代替夏枯草入药,主治淋巴结核、淋巴腺炎、高血压和甲状腺肿大等疾病。其化学成分研究尚未见报道。我们从马先蒿中分离得到2个单萜环烯醚甙P1和P2。P2经质谱(FAB MS)、核磁共振谱(~1H和~(13)C NMR)和红外光谱等数据与文献对照确定为桃叶珊瑚甙(aucubin)。P1为一新化合物。本文报道它们的分离与鉴定。     

氢键和π-π诱导的二维双层Zn(Ⅱ)配位聚合物的晶体结构和荧光性能

本文以间苯二吡啶(1,3-dpb)和4,4′-二苯醚二甲酸(H2oba)为配体,溶剂热合成了一个二维锌配位聚合物{[Zn(oba)(dpb)].H2O}n(1),对其进行了红外,热重,粉末单晶衍射等表征,配合物属于三斜晶系,空间群C2/c。相邻的Zn(Ⅱ)离子通过连接oba2-和dpb形成二维波浪形面,两个相邻的面相互互锁形成2D→2D的结构,并且面与面之间存在氢键。两组2D→2D的结构通过π-π作用进一步形成双层的二维超分子网络。此外,本文也研究了配合物的荧光性能。     

碳纤维表面原位SiC纳米纤维的合成与生长

基于化学气相反应法,以高纯Si和SiO₂为反应源材料,在碳纤维表面原位生长β-SiC纳米纤维。采用XRD、SEM和TEM 等分析测试手段对SiC纳米纤维进行了表征分析,研究了不同反应温度和时间对生成β-SiC纳米纤维微观形貌和结构的影响,并探讨了β-SiC纳米纤维的生长机制。研究结果表明：采取化学气相反应法能够制备高质量、高纯度的β-SiC纳米纤维,纳米纤维的直径约为100~300 nm。随着反应温度的提高和时间的延长,纳米纤维的产额增加,且微观组织形貌发生了变化。结合制备过程和纳米纤维微观结构的观察分析,表明气-固(VS)机制是SiC纳米纤维生长的主要机理。     

基于电聚合多巴胺-透明质酸复合膜界面构建过氧化氢电化学传感器

在玻碳电极上,通过电聚合方式修饰聚多巴胺,基于静电作用与透明质酸形成复合膜界面,利用活性氧H2O2对透明质酸的降解作用和电化学阻抗检测技术,实现对H2O2的检测。结果表明,在0.01 mol/L PBS(pH 7.0)介质中,加入H2O2作用30～40 min,此传感器可成功用于对H2O2的检测,线性范围为1.0×10"5～4.0×10"4mol/L,检出限为2.0×10"6mol/L。此电化学传感器具有灵敏、廉价、良好的稳定性和重现性等优点,建立了一种活性氧检测方法。     

Two 3D supramolecular polymers constructed from an amino acid and a high-nuclear Ln6Cu24 cluster node

The first successful attempt to construct 3D supramolecular frameworks with high-nuclear 3d-4f heterometallic clusters as a node is reported. The self-assembly of Ln3+, Cu2+ and amino acid in solution leads to the formation of two polymers, 35-nuclear complex [Sm6Cu29] 1 with a primitive cubic net-like structure and 36-nuclear complex [Nd6Cu30] 2 with a face-centred cubic network type structure. Glycine and L-proline, respectively, were used as ligands. It should be noted that 2 has a chiral framework. X-ray structure analyses show that 1 crystallizes in the triclinic P1 space group (a=19.6451(8), b=20.4682(8), c=20.7046(8) A, alpha=89.453(1), beta=66.290(1), gamma=68.572(1) degrees, V=7003.0(5) A3 and Z=1) and 2 belongs to the cubic P2(1)3 space group (a=b=c=32.4341(3) A, V=34 119.7(5) A3 and Z=4). Both complexes utilize Ln6Cu24 octahedral clusters as nodes and trans-Cu(amino acid)2 groups as bridges. Electrical conductivity measurements reveal that both polymers behave as semiconductors.     

ZIF67衍生硫化钴/多孔碳复合催化剂的制备及其电催化性能

采用离子交换法与热处理相结合的方法,以ZIF67为前驱体,硫代乙酰胺为硫源,制备出硫化钴/多孔碳(CoS/C)复合催化材料,并探讨了硫化时间对复合催化剂的形貌、结构及其氧还原(ORR)性能的影响。采用扫描电子显微镜(SEM)、透射电子显微镜(TEM)、X射线衍射仪(XRD)、N2吸附-脱附测定仪、X射线光电子能谱分析(XPS)、拉曼光谱仪(Raman)和旋转圆盘电极(RDE)技术表征催化剂的物理特征和电催化性能。研究结果显示,在碱性条件下该复合催化剂具有与20%(w/w)的商业Pt/C催化剂相媲美的ORR活性,其半波电位仅比Pt/C催化剂低31 mV。随着硫化时间的增加,硫化钴颗粒逐渐增大,催化剂中碳材料的无序程度出现先减小后增大的趋势。在硫化时间为10 min时,复合催化剂在0.1 mol·L-1KOH中表现出良好的电催化活性,且在ORR过程中复合催化剂的平均转移电子数可达到3.72,接近于4,说明氧气在该催化剂表面发生的是四电子转移过程。     

C_(74)的结构、电子光谱及三阶线性光学性质的理论研究

用密度泛函（DFT）方法（BLYP/3－21G~*）研究了C_(74)的稳定几何构型。用 ZINDO及ab initio GIS两种方法对C_(74)的电子光谱进行了计算，预测C_(74)在红 外区域有光谱吸收。计算了C_(74)的三阶非线性光学系数<γ>为1.483 * 10~(-32) esu，它比C_(60)的<γ>（8.84 * 10~(-34) esu）要大得多。预测C_(74)亦将是 一种有很好应用前景的磁性材料。     

新型两亲性含糖嵌段聚合物的合成与自组装

以β-环糊精(β-CD)和2-乙基-2-噁唑啉(EtOz)为原料, 通过活性端基化学偶联法制备了乙酰麦芽七糖/聚(2-乙基-2-噁唑啉)两嵌段聚合物(AcMH-b-PEtOz), 借助核磁共振氢谱、红外光谱和凝胶渗透色谱等手段证实了产物的化学结构. 采用核磁共振氢谱、荧光光谱、透射电子显微镜、动态光散射及紫外-可见分光光度等方法探讨了产物在水溶液中的自组装行为. 结果表明, 所得嵌段聚合物直接溶于水后可通过自组装形成纳米球形“核-壳”结构胶束, 同时具有温度响应性. 所得聚合物的临界胶束浓度(cmc)为4~7 mg/L, 平均粒径(d)为83~115 nm, 临界相转变温度(LCST)为49~64 ℃, 并且均可通过PEtOz的链长进行调控.     

Development of novel backwash cleaning technique for reverse osmosis in reclamation of secondary effluent

The objective of the study was to further develop a novel cleaning technique for reverse osmosis in reclamation of municipal secondary effluent. This technique is a new backwash method via direct osmosis (DO) by intermittent injection of the high salinity (HS) solution without stopping of high pressure pump and it is environment and membrane friendly technique. In the study, DO-HS trials were carried out with a UF-RO pilot system which was operated on site with the secondary treated effluent as the raw feed. Different operating conditions for DO-HS treatment in the actual process were investigated. It was found that the operation for implementation of the DO-HS cleaning technique developed was easy. For the first time, the actual profiles of HS concentration, DO backwash flow rate, brine flow rate and permeate pressure during DO-HS treatment have been demonstrated. It was observed that turbidity of the brine stream during DO-HS treatment at 3 NTU was 5 times higher than that before DO-HS treatment. The results from this study have confirmed the previous hypothesis with DO-HS treatment that there would be a strong driving force for DO backwash to lift and sweep the foulants from the membrane surface which would be carried over to the brine. The optimal plant operating conditions in terms of RO feed flow rate, HS concentration and HS injection time are ready for the DO-HS method to be adopted and validated in a long-term continuous plant operation.