基于曲线拟合的形态相似鹅膏菌的傅里叶变换红外光谱研究

利用傅里叶变换红外光谱仪测试了形态相似的灰疣鹅膏菌、灰绒鹅膏菌和灰褶鹅膏菌的光谱,结果显示,它们的傅里叶变换红外光谱主要由蛋白质和多糖的振动吸收带组成,其蛋白质的吸收频率略有差。选择酰胺I带(中心频率1647cm-1)进行傅里叶自去卷积和曲线拟合处理后3种鹅膏菌中蛋白质在酰胺I带的吸收峰都由12个子峰叠加而成,其中在无序(1650cm-1)、α螺旋(1658cm-1)和β转角结构(1666cm-1)的振动吸收峰上,灰褶鹅膏菌吸收峰的面积百分比分别是20.98%、4.47%和17.14%,明显地区别于其它两种鹅膏菌(灰疣鹅膏菌:10.26%、12.58%和7.71%;灰绒鹅膏菌:14.33%、9.76%和8.83%)。在1683cm-1处的β转角吸收峰上,灰绒鹅膏菌吸收峰的面积百分比是1.92%,明显小于其它两种鹅膏菌(灰疣鹅膏菌:8.03%;灰褶鹅膏菌:6.65%)。研究表明:傅里叶变换红外光谱技术能提供大型真菌所含蛋白质二级结构信息。     

纳米PbSnO3的制备及其燃烧催化性能的研究

Nanocomposite PbSnO₃was synthesized by coprecipitation method , and its phase evolution process was investigated. The particle size, crystal form, and phase of samples were determined with XRD, TEM and EDS. The catalytic actiyity of sample on the thermal decomposition of RDX was investigated by DSC. The results show that nanocomposite PbSnO₃with the diameter of 9 nm can be obtained by calcining at 600 ℃ for 2 h, which crystal is cubic (pyrochlore type). The catalytic actiyity of nanocomposite PbSnO₃on the thermal decomposition of RDX is much higher than that of normal PbSnO₃. The nanocomposite PbSnO₃can decrease the peak temperature of thermal decomposition of RDX from 240.1 ℃ to 236.5 ℃, and the decomposition enthalpy ΔH of RDX increases 722 J·g^-1 （about 70%）.     

高压微射流制备纳米中链脂肪酸脂质体的研究

以中链脂肪酸(MCFA)为模型材料,比较了高压微射流(HPM)、超声波和微孔过滤3种方法处理后的MCFA脂质体,着重研究了HPM的处理压力和处理次数对脂质体的平均粒度、包封率和稳定性的影响。结果表明:相比超声波和微孔过滤法,HPM处理后的MCFA脂质体的平均粒度最小、包封率最高、稳定性良好;在120 MPa压力条件下处理6次时,MCFA脂质体的平均粒度达到最小,为(73.9±10.2)nm,包封率为(52.20±9.57)%;在120 MPa压力条件下处理4次时,包封率和载药量达到最高,分别为(70.64±11.25)%和(9.42±0.83)%,稳定性系数最高,为0.9990±3.6951,平均粒度为(78.9±21.5)nm。     

溶剂热法制备Ag/TiO_2纳米材料及其光催化性能

以乙醇为溶剂,钛酸四丁酯为前驱体,用溶剂热法制备了Ag表面修饰的负载型纳米二氧化钛光催化剂.利用X射线衍射(XRD)、N2吸附-脱附(BET)、透射电子显微镜(TEM)、X射线光电子能谱(XPS)、紫外-可见(UV-Vis)光谱等技术对其进行了系统的表征,以亚甲基蓝(MB)溶液的脱色降解为模型反应,考察了不同Ag含量样品的光催化性能.结果表明:用溶剂热法制备的样品中TiO2皆为锐钛矿相,金属Ag颗粒沉积在TiO2表面,粒径为2nm左右,比表面积较溶胶凝胶法制备的样品大大增加,最高可达151.44m2·g-1;UV-Vis光谱和光催化实验表明:Ag修饰使TiO2对光的吸收能力大大增强,吸收带边红移至可见光区,亚甲基蓝在该复合材料上的光催化降解反应遵循一级反应动力学模型;溶剂热法制备样品的光催化性能明显好于溶胶凝胶法制备的样品,在紫外光和可见光下,Ag摩尔分数为5%的样品表现出最佳的光催化活性.     

Aggregation Processes with Catalysis-Driven Decomposition

We propose a three-species aggregation model with catalysis-driven decomposition. Based on the mean-field rate equations, we investigate the evoIution behavior of the system with the size-dependent catalysis-driven decomposition rate J（i; j; k） = Jijk^v and the constant aggregation rates. The results show that the cluster size distribution of the species without decomposition can always obey the conventional scaling law in the case of 0 ≤v ≤ 1, while the kinetic evolution of the decomposed species depends crucially on the index v. Moreover, the total size of the species without decomposition can keep a nonzero value at large times, while the total size of the decomposed species decreases exponentially with time and vanishes finally.     

Elimination of Gray-Tracking Effects of KTiOPO4 Crystals Using a Strong Focusing Scheme

A simple method is presented to eliminate gray-tracking effects of KTP crystals using a strong focusing scheme. Experimental and theoretical studies on the gray-tracking effects are carried out. A 18 W green laser is demon-strated with a 9 kHz repetition rate, a beam quality factor of M^2 = 1.6 and a conversion efficiency of 44%.     

水热法合成ReMn2O5(Re=Gd，Sm，Yb)纳米粉体

本文采用水热法,以KMnO4和Mn(C2H3O2):为锰源,在250℃反应24 h合成了高各向异性的GdMn2O5、SmMn2O5和YbMn2O5纳米粉体.利用X射线粉末衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、选区电子衍射(SAED)、和高分辨透射电镜(HRTEM)对产物的结构和形貌进行了表征.结果表明,所制备的ReMn2O5(Re=Gd,Sm,Yb)均为正交相结构.反应溶液中碱性矿化剂浓度对产物的形貌和尺寸有重要的影响.通过实验结果分析了纳米结构的形成机理.     

时间序列中向量自回归模型的拟合优度检验

本文提出并研究了一些诊断检验工具,用于一般参数型的时间序列向量自回归模型的拟合优度检验．该检验在零假设下渐近服从卡方分布,并能侦察到以参数速度收敛到零假设模型的备择模型．检验涉及到权函数,因此可以灵活地选择权函数以提高检验功效,尤其是在可能的偏离方向已知情形．如果备择不是方向型的,而只知道其属于某一个模型类中,此时可构造一个渐近分布自由的极大极小（maximin）检验．对于饱和备择,基于得分型思想给出了构造万能（omnibus）检验的可行性构想．本文对提出的检验从理论上进行了功效研究．另外,为提高检验在小样本情形的功效,本文把非参数Monte Carlo检验方法推广到相依数据情形．最后,通过模拟研究和实际数据分析进一步表明检验的有用性．     

Integrated and Unintegrated Parton Distributions

We compare the twist-2 and twist-4 parton distributions both in integrated and unintegrated parton distributions. We find that when x decreases the difference between the twist-2 and twist-4 parton distributions become obvious except for the valence quark distributions. We hope the future experiments may distinguish whether the twist-4 correction is needed or not and select a reasonable unintegrated parton distribution model.     

Dynamic models of pest propagation and pest control

This paper proposes a pest propagation model to investigate the evolution behaviours of pest aggregates. A pest aggregate grows by self-monomer birth, and it may fragment into two smaller ones. The kinetic evolution behaviours of pest aggregates are investigated by the rate equation approach based on the mean-field theory. For a system with a self-birth rate kernel I(k)=Ik and a fragmentation rate kernel L(i,j)=L, we find that the total number M₀^A(t) and the total mass of the pest aggregates M₁^A(t) both increase exponentially with time if L ≠ 0. Furthermore, we introduce two catalysis-driven monomer death mechanisms for the former pest propagation model to study the evolution behaviours of pest aggregates under pesticide and natural enemy controlled pest propagation. In the pesticide controlled model with a catalyzed monomer death rate kernel J₁(k)=J₁k, it is found that only when I<J₁B₀ (B₀ is the concentration of catalyst aggregates) can the pests be killed off. Otherwise, the pest aggregates can survive. In the model of pest control with a natural enemy, a pest aggregate loses one of its individuals and the number of natural enemies increases by one. For this system, we find that no matter how many natural enemies there are at the beginning, pests will be eliminated by them eventually.