High-power continuous-wave operation of a diode-pumped laser at

The continuous-wave laser properties of an efficient diode-pumped Nd:GdVO₄ crystal operating at formed with a simple plane-concave cavity have been studied. With the incident pump power of 21 W, an output power of 6.9 W was obtained, giving an optical conversion efficiency of 32.8% and a slope efficiency of 35.3%. The laser characterization of two different Nd³⁺-doped concentration of Nd:GdVO₄ crystals were studied.     

关于GB型空间的若干结果

本文对GB型空间进行了若干讨论,得到了一些结果。 设X为Banach空间,X为X的共轭空间,B(X,X)为X到X的所有有界线性算子组成的空间。如果X中的弱收敛序列为弱收敛序列,则称X为GB型空间。Grothendieck.A于1953年证明了l~∞是GB型空间。显然自反空间是GB型空间。     

Surface profile measurement of moving objects by using an improved π phase-shifting Fourier transform profilometry

The π phase-shifting Fourier transform technique is introduced into the surface profile measurement of moving objects. A digital grating comprising two regions, which have a π phase shifting is projected onto the object. Two line-scan CCD cameras are used to capture two deformed fringe patterns with π phase shifting at the same time. As the object is moving, each point at the object surface can be captured twice. The digital correlation method is used to calibrate the experimental system. The zero-order component can be eliminated by subtracting intensities of the same surface point in two captured images. And then the phase can be extracted by Fourier transform without the disturbance of zero-order component. Experimental results demonstrate that this method is feasible for the moving surface profile detection and the measurable slope of height variation can be extended.     

强磁场条件下金属凝固过程中第二相的迁移行为

理论分析表明,第二相的迁移行为可以通过迁移速度进行表征.影响迁移速度的因素包括第二相和熔体的物理性质、磁场强度和梯度大小、第二相的形状和体积等因素.强磁场下洛伦兹力的效果为促进第二相在基体中的均匀分布,其效率在磁场强度大于某一定值时逐渐降低.在梯度强磁场条件下,第二相迁移行为和分布状态的主要控制参数是梯度磁场下的磁化力.在磁场梯度较小时,因洛伦兹力的制约磁化力控制第二相迁移的效果不明显,随着磁场梯度的增加,磁化力的作用效果逐渐增强.通过研究强磁场下Al-Si合金、Al-Ni合金中原位自生第二相的迁移行为实 关键词： 强磁场 迁移 第二相 凝固     

SrMn0.5Fe0.5O3的自旋玻璃态和过渡金属离子价态的研究

采用固相反应法制备了SrMn_0.5Fe_0.5O₃陶瓷样品,并对样品的晶体结构,磁性和离子价态进行了系统的表征与分析. X射线衍射谱的Rietveld拟合表明样品属于理想的立方钙钛矿型结构,Mn离子和Fe离子随机占据B位的O八面体中心. X射线光电子能谱表明Mn离子为+3和+4的混合原子价态,Fe离子为+3价. 样品在大于230K的高温区域呈现Curie顺磁特性,在小于230 K的低温区域样品表现出自旋玻璃态行为,这种特性源于Mn离子和Fe离子之间的交换作用及自身价态和分布的不均匀性. 由于Fe³⁺离子占据O八面体的中心,对顺磁区的Mssbauer谱测量表现为四级分裂.     

超薄靶激光质子加速实验研究

在超短超强飞秒SILEX-Ⅰ激光装置上,开展了薄膜靶激光质子加速的实验研究。实验发现激光预脉冲、靶厚度对质子加速有很大的影响。在激光强度3×1018~3×1019W/cm2条件下,采用前表面厚度为3μm铜、后表面镀4μm厚CH靶,质子的最大能量达到3.15 MeV。而对190 nm厚CH膜靶,质子的最大能量为0.54 MeV。初步研究了激光偏振对质子加速的影响,相同激光功率条件下,圆偏振激光加速产生的质子最大能量略低于P偏振打靶。这些结果与靶后鞘层加速机制相一致。     

硼酸对亚微米级Ca3Sc2Si3O12:Ce绿色荧光粉的制备及发光性能的影响

采用凝胶-燃烧法合成了Ca₃Sc₂Si₃O₁₂ ∶Ce绿色LED用荧光粉,用X射线粉末衍射(XRD)、扫描电镜(SEM)、荧光光谱仪等对合成产物进行了分析和表征.结果表明:通过添加H₃BO₃做助熔剂,制得的荧光粉晶相纯正,颗粒形貌均呈现为较规则的类球形,而且所得荧光粉的粒径均小于1 μm.发射光谱呈现为一宽带,发射主峰位于505 nm,该宽峰对应于Ce³⁺关键词： 白光LED 荧光粉 3Sc₂Si₃O₁₂ ∶Ce')" href="#">Ca₃Sc₂Si₃O₁₂ ∶Ce 发光     

A new model for electromigration grain boundary noise based on free volume

Grain boundary plays a key role in electromigration process of polycrystal interconnection. We take a free volume to represent a 'vacancy--ion complex' as a function of grain boundary specific resistivity, and develop a new characterisation model for grain boundary noise. This model reveals the internal relation between the boundary scattering section and electromigration noise. Comparing the simulation result with our experimental result, we find the source as well as the form of noise change in the electromigration process. In order to describe the noise enhancement at grain boundary quantitatively, we propose a new parameter-grain boundary noise enhancement factor, which reflects that the grain boundary noise can characterise the electromigration damage sensitively.     

A coupling method based on new MFE and FE for fourth-order parabolic equation

In this article, a coupling method of new mixed finite element (MFE) and finite element (FE) is proposed and analyzed for fourth-order parabolic partial differential equation. First, the fourth-order parabolic equation is split into the coupled system of second-order equations. Then, an equation is solved by finite element method, the other equation is approximated by the new mixed finite element method, whose flux belongs to the square integrable space replacing the classical H(div;Ω) space. The stability for fully discrete scheme is derived, and both semi-discrete and fully discrete error estimates are obtained. Moreover, the optimal a priori error estimates in L ² and H ¹-norm for both the scalar unknown u and the diffusion term γ and a priori error estimate in (L ²)²-norm for its flux σ are derived. Finally, some numerical results are provided to validate our theoretical analysis.     

玻璃微球表面辉光等离子体聚合物涂层的热稳定性研究

采用辉光放电聚合技术,在不同工作压强条件下在直径为350—400 μm,厚度为2.5—3 μm的玻璃微球上制备了辉光放电聚合物 (GDP)涂层,并对玻璃/GDP微球模拟充气过程进行了热稳定性实验.利用傅里叶变换红外光谱仪、元素分析仪、热重法、体视显微镜和X射线照相技术对GDP涂层的内部结构及其化学键、热稳定性、微球形貌和厚度进行了表征.结果表明:GDP涂层中的碳氢比、不饱和键和C C含量随着制备压强的增大而减小,低压的热稳定性较好,GDP涂层与玻璃微球的结合力提高,流变、起泡和脱层现象也得到明显改善.微球 关键词： 玻璃微球 GDP涂层 热稳定性 结合力