Bichromatic laser frequency stabilization with Doppler effect and polarization spectroscopy

The interaction between polychromatic fields and atoms is an important subject in quantum optics.Frequency locking for small frequency interval multi-field is usually required in some experiments.In this letter,we experimentally demonstrate a holistic scheme for bichromatic laser frequency stabilization.Compared with traditional saturation absorption methods and complicated frequency shift schemes,offset locking for bichromatic fields is simply achieved using polarization spectroscopy and Doppler effect.Frequency locking with a wide-range asymmetry of the detuning is also shown.Our scheme makes laser spectroscopy experiments with polychromatic fields more convenient.     

不同磁路电子回旋共振离子源引出实验

空间推进所用的电子回旋共振离子源(ECRIS)应具有体积小、效率高的特点. 本文研究的ECRIS使用永磁体环产生磁场, 有效减小了体积, 该离子源利用微波在磁场中加热电子, 电子与中性气体发生电离碰撞产生等离子体. 磁场在微波加热电子的过程中起关键作用, 同时影响离子源内等离子体的约束和输运. 通过比较四种磁路结构离子源的离子电流引出特性来研究磁场对10 cm ECRIS性能的影响. 实验发现: 在使用氩气的条件下, 特定结构的离子源可引出160 mA的离子电流, 最高推进剂利用率达60%, 最小放电损耗为120 W·A^-1; 所有离子源均存在多个工作状态, 工作状态在微波功率、气体流量、引出电压变化时会发生突变. 离子源发生状态突变时的微波功率、气体流量的大小与离子源内磁体的位置有关. 通过比较不同离子源的引出离子束流、放电损耗、气体利用率、工作稳定性的差异, 归纳了磁场结构对此种ECRIS引出特性的影响规律, 分析了其中的机理. 实验结果表明: 保持输入微波功率、气体流量、引出电压不变时, 增大共振区的范围、减小共振区到栅极的距离, 离子源能引出更大的离子电流; 减小共振区到微波功率入口、气体入口的距离能降低维持离子源高状态所需的最小微波功率和最小气体流量, 提高气体利用率, 但会导致放电损耗增大. 研究结果有助于深化对此类离子源工作过程的认识, 为其设计和性能优化提供参考.     

A pigment (CuS) identified by micro‐Raman spectroscopy on a Chinese funerary lacquer ware of West Han Dynasty

A blue pigment was identified by micro‐Raman spectroscopy, X‐ray fluorescence spectroscopy (XRF), scanning electron microscopy (SEM)/energy dispersive X‐ray (EDX) and X‐ray diffraction (XRD). The test sample, a funerary lacquer tray, belongs to West Han Dynasty (206 BC–AD 8) of China and was decorated with faint blue patterns. The result from Raman spectroscopy showed that the faint blue is covellite (CuS) due to the presence of a characteristic peak at 474.5 cm⁻¹, which further was confirmed by XRF, SEM–EDX and XRD. This research indicated that CuS had been used as a blue pigment to decorate lacquer wares from the West Han Dynasty in China. Copyright © 2009 John Wiley & Sons, Ltd.     

Effects of carbonization temperature on microstructure and electrochemical performances of phenolic resin-based carbon spheres

Activated phenol resin-based carbon spheres (APCS) electrodes with high double layer capacitance and good rate capability were prepared from phenol resin-based spheres (PS) at different carbonization temperatures prior to KOH activation. The carbonization temperature has a marked effect on both the pore structure and the electrochemical performances of the APCS in 6 M KOH electrolyte. APCS carbonized at 600 °C results in higher specific surface area and larger pore size, and hence higher capacitance and better rate capability. The specific capacitance of the APCS in 6 M KOH aqueous solution can be as high as 282 F g⁻¹. It remains 252 F g⁻¹ as the current density increases to 1000 mA g⁻¹.     

Preparation and characterization of carbamoylphosphonate(CMPO) silane grafted on various mesoporous silicas

The carbamoylphosphosphonate silane (CMPO analogue; 2-(diphenylphosphoryl)-N-(3-(triethoxysilyl)propyl) acetamide) modified mesoporous silica was prepared via a post-synthesis grafting method for the effective purification of rare earth elements. The guest CMPO analogue was synthesized by direct coupling reaction of 2-(diphenylphosphoryl) acetic acid and 3-(triethoxysilyl)propan-1-amine. Various mesoporous silicates such as MCM-41, SBA-15, or amorphous silica nanoparticles were adopted as host materials. The resulting surface-modified mesoporous materials were characterized with respect to their structural integrity, surface area, and pore size and the concentration of the CMPO silane species. These CMPO functionalized periodic mesostructured silicates offer the potential of applications as catalysts, sensors, or environmental sorbents.     

HL-2M偏滤器CFC/CuCrZr靶板的非晶钎焊工艺研究

在采用商用的STEMET-1101非晶钎料、温度为710~750°C的真空钎焊下,对CFC/OFC(氯氟烃/无氧铜)复合块与CuCrZr(铬锆铜)的钎焊进行了研究。首先,通过X-射线衍射(XRD)和差式扫描量热分析对钎料的结构和熔化行为进行了表征;然后,通过光学显微镜、电子探针微分析和拉伸试验等方法对焊缝的组织形貌、元素成分分布、相结构和力学性能进行了分析;最后,通过高热负荷装置对CFC/OFC/CuCrZr钎焊模块的热疲劳性能进行测试。结果表明,在710~750°C钎焊温度内焊缝由Cu固溶体、(Cu, Ni)3P和Ni(Cu ,Cr)2P金属间化合物组成,焊缝平整无裂纹;特别是在750°C/15min情况下,抑制了焊缝金属间化合物的连续分布,OFC/CuCrZr的焊接强度大于OFC的抗拉强度,CuCrZr/CuCrZr的结合强度为210MPa,并呈现部分韧性断裂。在750°C/15min情况下制备的CFC/Cu/CuCrZr模块可以承受1000次7MW·m^-2的循环热负荷。     

Subluminal to superluminal light propagation in a V-type three-level atomic system interacting with squeezed vacuum

We study the light propagation properties in a V-type three-level atomic system interacting with two independent broadband squeezed baths. Using the graphic method, the dependences of the absorption and the dispersion of the system on the coupling field strength, the incoherent pumping field strength and the intensity of the squeezed vacuum are analysed. The result shows that the probe pulse propagation can be changed from subluminal to superluminal speed.     

非线性规划问题的二阶对称对偶性

本文讨论了二阶凸和二阶凹条件下的二阶对称对偶问题,并利用有效性和真有效性概念证明了弱对偶、强对偶、逆对偶及自对偶定理。     

Design of wideband graded-index antireflection coatings at oblique light incidence

We suggest a design method of graded-refractive-index (GRIN) antireflection (AR) coating for s-polarized or p-polarized light at off-normal incidence. The spectrum characteristic of the designed antireflection coating with a quintic effective refractive-index profile for a given state of polarization has been discussed. In addition, the genetic algorithm was used to optimize the refractive index profile of the GRIN antireflection for reducing the mean reflectance of s- and p-polarizations. The average reflectance loss was reduced to only 0.04% by applying optimized GRIN AR coatings onto BK7 glass over the wavelength range from 400 to 800 nm at the incident angle of θ₀ =70°.