基于LabVIEW FPGA的三相锁相环设计与实现

针对传统FPGA模式开发的锁相环在实时人机交互方面的不足,设计了基于LabVIEW FPGA技术的三相锁相环;方案以sbRIO-9631模块为硬件平台,利用LabVIEW编程控制FPGA逻辑,在FPGA中分三级流水线实现了基于dq变换的锁相环算法,并通过FIFO实时上传采集信号、锁定相位至PC机,最后在PC机上实现对锁相环性能分析、PI参数调控和数据显示;经过实验,该锁相环具有较高的精度,锁相时间约为两个周期,锁相误差约为0.03 rad,通过PC机可实时调节锁相性能。     

低温液体管路输送中几个问题的分析

对低温液体传输过程中气体置换、预冷过程、竖直管道中间歇泉现象、盲支管填充时和阀门开启时的不稳定现象作了较详细分析,指出了其可能造成的危害,并提出了相应的解决方法。     

光子计数技术及其在弱光计量中的应用

从光子计数原理出发,介绍光子计数系统的构成,分析光电倍增管的脉冲幅度分布,并叙述光子计数技术在弱光计量中的实际应用。     

Rotation selectivity of random phase encoding in volume holograms

We present the study of angular selectivity for holographic multiplexing based on random phase encoding by a ground glass. The rotational selectivity of the volume hologram is calculated theoretically and coincides with the experimental measurement. By controlling the parameters including rotational center, effective numerical aperture of both volume hologram and the ground glass, we can obtain different rotational selectivity applied to random phase encoding in volume holographic storage.     

Fabrication of Ni-Co binary oxide/reduced graphene oxide composite with high capacitance and cyclicity as efficient electrode for supercapacitors

Nickel-cobalt binary oxide/reduced graphene oxide (G-NCO) composite with high capacitance is synthesized via a mild method for electrochemical capacitors. G-NCO takes advantages of reduced graphene oxide (RGO) and nickel-cobalt binary oxide. As an appropriate matrix, RGO is beneficial to form homogeneous structure and improve the electron transport ability. The binary oxide owns more active sites than those of nickel oxide and cobalt oxide to promote the redox reaction. Attributed to the well crystallinity, homogeneous structure, increased active sites, and improved charge transfer property, the G-NCO composite exhibits highly enhanced electrochemical performance compared with G-NiO and G-Co₃O₄ composites. The specific capacitance of the G-NCO composite is about 1750 F g^?1 at 1 A g^?1 together with capacitance retention of 79 % (900/1138 F g^?1) over 10,000 cycles at 4 A g^?1. To research its practical application, an asymmetric supercapacitor with G-NCO as positive electrode and activated carbon as negative electrode was fabricated. The asymmetric device exhibits a prominent energy density of 37.7 Wh kg^?1 at a power density of 800 W kg^?1. The modified G-NCO composite shows great potential for high-capacity energy storage.     

Spin-polarized current through a lateral double quantum dot with spin–orbit interaction

We study the spin-polarized current through a vertical double quantum dot scheme. Both the Rashba spin–orbit (RSO) interaction inside one of the quantum dots and the strong intradot Coulomb interactions on the two dots are taken into account by using the second-quantized form of the Hamiltonian. Due to the existence of the RSO interaction, spin-up and spin-down electrons couple to the external leads with different strengths, and then a spin polarized current can be driven out of the middle lead by controlling a set of structure parameters and the external bias voltage. Moreover, by properly adjusting the dot levels and the external bias voltages, a pure spin current with no accompanying charge current can be generated in the weak coupling regime. We show that the difference between the intradot Coulomb interactions strongly influences the spin-polarized currents flowing through the middle lead and is undesirable in the generation of the net spin current. Based on the RSO interaction, the structure we propose can efficiently polarize the electron spin without the usage of any magnetic field or ferromagnetic material. This device can be used as a spin-battery and is realizable using the present available technologies.     

双折射调谐器设计的等色图原理

提出双折射调谐器设计的等色图方法，给出原理。分析表明当晶片光轴处在以折射光线为轴线、顶角为４５°的圆锥面上时，双折射调谐器具有最快的波长调谐速率；当光轴位于过折射光线并与入射面成４５°或１３５°的平面内时，调谐器抑制非所需波长的能力最强。由此给出光轴相对晶片表面的两个优化取向，对石英晶片它们分别为１８．７１２°和５９．９２２°。文中还给出了三块晶片组合的调谐器的设计例子，对其调谐特性进行了简要的讨论。     

Development of a portable and fast wire tension measurement system for MWPC construction

In a multi-wire proportional chamber detector(MWPC), the anode and signal wires must maintain suitable tension, which is very important for the detector's stable and accurate performance. As a result, wire tension control and measurement is essential in MWPC construction. A high pressure3 He MWPC detector is to be used as the thermal neutron detector of the multi-functional reflectometer at China Spallation Neutron Source, and in the construction of the detector, we have developed a wire tension measurement system. This system is accurate,portable and time-saving. With it, the wire tension on an anode wire plane has been tested. The measurement results show that the wire tension control techniques used in detector manufacture are reliable.     

A Dual-Wavelength Cladding-Pumped Er^3＋/Yb^3＋ Codoped Fibre Laser System with More Than 2 W Output and Tunable Wavelength Spacing

A dual-wavelength laser system with wideband tunable wavelength spacing and more than 2 W output power is proposed and demonstrated. The operation principle of the laser system is based on the saturation gain characteristic of a cladding-pumped Era＋ /yba＋ co-doped fibre amplifier combining with a wideband tunable fibre laser with fiat power spectrum. The tuning range of the wavelength spacing is continuous within a 35 nm spectral range, and the power difference between both lasing wavelengths can be easily adjusted and controlled by a variable optical attenuator. The total output power can approximately keep unchangeable when the wavelength spacing and the power difference between both lasing wavelengths are continuously tuned and changed. The maximum total output power of the laser system is about 2.22 W.