线圈型全光纤偏振器的研究

本文采用等效电流法对线圈型全光纤偏振器进行了分析计算.对应于保偏光纤中两正交传输基模的消光比,提出了一种分析保偏光纤弯曲损耗的新方法,这种方法基于将保偏光纤两个不同偏振模式分别等效为两个普通圆光纤的基模,等效参数通过测量不同偏振模式的模场半径来确定.实验证明这种理论计算方法与实验结果一致.最终,我们研制出的线圈型光纤偏振器在1.31μm工作波长下,实测消光比达30dB以上,工作偏振模式插入损耗≤3dB.     

分布耦合系数对线性啁啾光栅色散的影响

本文从光栅反向耦合波方程出发,经相位共轭变换用Runge-Kuta-Gil方法对其数值求解。针对线性啁啾光栅耦合系数变化服从不同的分布,分析了各种分布对光栅反射谱特性和色散特性的影响。     

Fabrication of tunable colloid crystals from amine-terminated polyamidoamine dendrimers

A pH-responsive colloidal crystal was assembled using core-shell composite spheres, poly(styrene-methyl methacrylate-acrylic acid) (P(St-MMA-AA)) spheres covered by generation 4 amine-terminated polyamidoamine dendrimers. The light reflection of the colloidal crystal film can be tuned at different pH due to different protonation level of the dendrimers. The method shows a facile way to fabricate diffraction-based chemical and biological sensors by exploiting the effect of photonic crystal cooperated with tunable nanoparticles.     

NBR/ORGANOMODIFIED BENTONITE INTERCALATED HYBRIDS AND THEIR EFFECTS ON THE TOUGHNESS OF PVC

Hybrids of intercalative nitrile-butadiene rubber/organomodified bentonite (NBR/OMB) were prepared by thelatex intercalation technique. Investigation of their mechanical properties and the microstructore of NBR/OMB showed thatthe organomodified bentonite is an effective toughener for NBR. Transmission electronic microscopy (TEM) and X-rnydiffraction (XRD) tests showed that the NBR macromolecule could be intercalated into the galleries of bentonite.Incorporation of NBR/OMB hybrids as tougheners into poly(vinyl chloride) (PVC) results in a substantial increase in theimpact strength of PVC, but little decrease in its tensile strength and flexural strength, compared to the unmodified PVC.     

REDUCTION OF C=C DOUBLE BOND WITH BOROHYDRIDE EXCHANGE RESIN-TRANSITION METAL COMPOUND SYSTEMS

Borohydride exchange resin-transition metal(Co,Ni,Cu,)compoundsystems reduced C=C double to C-C single bond in ethanol.     

铁形态分析进展

本文对Fe（Ⅱ）、Fe（Ⅲ）形态分析在1990－2000年间的发展概况作了综述，内容包括分光光度法、色谱法、流动注射分析法等。引用文献53篇。     

聚丙烯中空纤维膜的微孔结构的控制

通过熔纺／冷拉伸法制备了微孔聚丙烯中空纤维膜。研究了工艺条件对微孔聚丙烯中空纤维膜的微孔结构与性能的影响。结果表明：随着纺丝温度的下降或熔体拉伸比的提高，最大可几孔径及孔隙率增大；熔纺中冷却风速提高，最大可几孔径及孔隙率较大；温度低于110℃时，热处理对最大可几孔径及孔隙率的影响较小，在120－130℃时，随着热处理温度的增加，最大孔径及孔隙率有明显增加的趋势；随着初纺中空纤维拉伸倍数的增加，孔隙率先增加而后下降。     

Synthesis and Characterization of Novel Orange-emitting Iridium（Ⅲ） Complexes with Diphenylquinoline Ligands Containing Fluorinated Substituent

Three new cyclometalated iridium（m） complexes based on ligands of diphenylquinoline with fluorinated subsfituents were prepared, and characterized by elemental analysis （EA）, ^1H NMR, and mass spectroscopy （MS）. The photophysical and electrophosphorescent properties of the complexes were briefly discussed.     

含锆层柱蒙脱石对1,2,4三甲基苯歧化反应的催化作用

用离子共聚法合成了硅锆层柱蒙脱石（ＳｉＺｒＰＩＬＭ）和铁锆层柱蒙脱石（ＦｅＺｒＰＩＬＭ），考察了它们对１，２，４三甲基苯（１，２，４ＴｒＭＢ）歧化反应的催化性能．１，２，４ＴｒＭＢ在催化剂样品上可发生歧化反应和异构化反应，歧化反应选择性达８０％以上．随着催化剂预处理温度的提高，１，２，４ＴｒＭＢ转化率下降，歧化反应选择性和四甲基苯（ＴｅＭＢ）中１，２，４，５ＴｅＭＢ含量则升高．催化剂对１，２，４ＴｒＭＢ歧化反应有择形催化作用，１，２，４，５ＴｅＭＢ和间二甲苯、邻二甲苯为主要产物，并且其含量偏离其热力学平衡组成，ＴｅＭＢ中１，２，４，５ＴｅＭＢ的含量在８５％以上．