Thermal Properties of Copoly(L‐lactic acid/glycolic acid) by Direct Melt Polycondensation

Poly(L‐lactic acid‐co‐glycolic acid) (PLGA) was prepared from hydroxy‐acids with melt polymerization. In this way, the copoly(L‐LA/GA) (PLGA) was synthesized directly using a binary catalyst (tin chloride dihydrate/p‐toluenesulfonic acid). The thermal properties of PLGA were studied by differential scanning calorimetry (DSC) and nuclear magnetic resonance (NMR). The results show that the melting point of PLGA decreases with increasing mole fraction of GA units in the copolymer. In addition, the melting point of polymer also decreases with increasing degree of racemization of the polymer.     

UFLC–MS/MS method for simultaneous determination of six lignans of Schisandra chinensis (Turcz.) Baill. in normal and insomniac rats brain microdialysates and homogenate samples: towards an in‐depth study for its sedative‐hypnotic activity

Schisandra chinensis (Turcz.) Baill., a traditional Chinese medicine, has been clinically used for the treatment of insomnia for centuries. The insomnia mechanism and the possible active ingredients of S. chinensis remain largely unknown. The objective of this study was to develop a method to detect its components which could pass through the blood brain barrier (BBB) by determining the brain microdialysate and brain tissue homogenate samples and then obtain the pharmacokinetic profile in brain for comprehensive understanding of its hypnotic clinical efficacy. Therefore, an efficient, sensitive and selective ultra fast liquid chromatography/tandem mass spectrometry method for the simultaneous determination of six sedative and hypnotic lignans (schisandrin, schisandrol B, schisantherin A, deoxyshisandrin, γ‐schisandrin and gomisin N) of Schisandra chinensis (Turcz.) Baill. in rat brain tissue homogenate and brain microdialysates has been developed and validated. The analysis was performed on a Shim‐pack XR‐ODS column (75 mm × 3.0 mm, 2.2 µm) using gradient elution with the mobile phase consisting of acetonitrile and 0.1% formic acid water. The method was validated in brain homogenate and microdialysate samples, which all showed good linearity over a wide concentration range (r² > 0.99), and the obtained lower limit of quantification was 0.1 ng · ml^?1 for the analytes in brain microdialysate samples. The intra‐ and inter‐day assay variability was less than 15% for all analytes. The study proved the six lignans, as sedative and hypnotic ingredients, could pass through the BBB with brain targeting, distributed mainly in the hypothalamus and possessed complete pharmacokinetics process in brain. The results also indicated that significant difference in pharmacokinetic parameters of the analytes was observed between two groups, while absorptions of these analytes in insomniac group were significantly better than those in normal group. Copyright © 2013 John Wiley & Sons, Ltd.     

Characterizing the Role of Iodine Doping in Improving Photovoltaic Performance of Dye‐Sensitized Hierarchically Structured ZnO Solar Cells

We report two novel types of hierarchically structured iodine‐doped ZnO (I? ZnO)‐based dye‐sensitized solar cells (DSCs) using indoline D205 and the ruthenium complex N719 as sensitizers. It was found that iodine doping boosts the efficiencies of D205 I? ZnO and N719 I? ZnO DSCs with an enhancement of 20.3 and 17.9 %, respectively, compared to the undoped versions. Transient absorption spectra demonstrated that iodine doping impels an increase in the decay time of I? ZnO, favoring enhanced exciton life. Mott–Schottky analysis results indicated a negative shift of the flat‐band potential (V_fb) of ZnO, caused by iodine doping, and this shift correlated with the enhancement of the open circuit voltage (V_oc). To reveal the effect of iodine doping on the effective separation of e^?‐h⁺ pairs which is responsible for cell efficiency, direct visualization of light‐induced changes in the surface potential between I? ZnO particles and dye molecules were traced by Kelvin probe force microscopy. We found that potential changes of iodine‐doped ZnO films by irradiation were above one hundred millivolts and thus significantly greater. In order to correlate enhanced cell performance with iodine doping, electrochemical impedance spectroscopy, incident‐photon‐current efficiency, and cyclic voltammetry investigations on I? ZnO cells were carried out. The results revealed several favorable features of I? ZnO cells, that is, longer electron lifetime, lower charge‐transfer resistance, stronger peak current, and extended visible light harvest, all of which serve to promote cell performance.     

A facile synthesis of the oxazolidinone antibacterial agent linezolid

A facile synthetic route of linezolid 1 has been developed.Using commercially available(R)epichlorohydrin as the starting material,1 was obtained through a sequence of cyclization,substitution, a Goldberg coupling,aminolysis and acetylation reactions.The synthetic route is easy to perform and can be scaled up.     

Comparison of microwave‐assisted and conventional extraction of mangiferin from mango (Mangifera indica L.) leaves

Mangiferin is the main bioactive component in mango leaves, which possesses anti‐inflammatory, antioxidative, antidiabetic, immunomodulatory, and antitumor activities. In the present study, a microwave‐assisted extraction method was developed for the extraction of mangiferin from mango leaves. Some parameters such as ethanol concentration, liquid‐to‐solid ratio, microwave power, and extraction time were optimized by single‐factor experiments and response surface methodology. The optimal extraction conditions were 45% ethanol, liquid‐to‐solid ratio of 30:1 (mL/g), and extraction time of 123 s under microwave irradiation of 474 W. Under optimal conditions, the yield of mangiferin was 36.10 ± 0.72 mg/g, significantly higher than that of conventional extraction. The results obtained are beneficial for the full utilization of mango leaves and also indicate that microwave‐assisted extraction is a very useful method for extracting mangiferin from plant materials.     

Accelerated solvent extraction and pH‐zone‐refining counter‐current chromatographic purification of yunaconitine and 8‐deacetylyunaconitine from Aconitum vilmorinianum Kom

This study aimed to seek an efficient method to extract and purify yunaconitine and 8‐deacetylyunaconitine from Aconitum vilmorinianum Kom. by accelerated solvent extraction combined with pH‐zone‐refining counter‐current chromatography. The major extraction parameters for accelerated solvent extraction were optimized by an orthogonal test design L₉ (3)⁴. Then a separation and purification method was established using pH‐zone‐refining counter‐current chromatography with a two‐phase solvent system composed of petroleum ether/ethyl acetate/methanol/water (5:5:2:8, v/v) with 10 mM triethylamine in the upper phase and 10 mM HCl in the lower phase. From 2 g crude extract, 224 mg of 8‐deacetylyunaconitine (I) and 841 mg of yunaconitine (II) were obtained with a purity of over 98.0%. The chemical structures were identified by ESI‐MS and ¹H and ¹³C NMR spectroscopy.     

Direct conversion of fructose-based carbohydrates to 5-ethoxymethylfurfural catalyzed by AlCl3·6H2O/BF3·(Et)2O in ethanol

Direct conversion of fructose-based carbohydrates to 5-ethoxymethylfurfural (EMF) catalyzed by Lewis acid in ethanol was investigated. It was found that BF₃·(Et)₂O was favorable for 5-hydroxymethylfurfural (HMF) etherification to EMF. BF₃·(Et)₂O combination with AlCl₃·6H₂O with the molar ratio of 1 was an effective catalyst system for synthesis of EMF from fructose-based carbohydrates. 55.0%, 45.4% and 23.9% of EMF yields were obtained from fructose, inulin and sucrose under optimized conditions, respectively.     

Synthesis of Novel Pyrrolo[1′,5′‐a]‐1,8‐naphthyridine Derivatives through a Facile One‐Pot Process

Novel pyrrolo[1′,5′‐a]‐1,8‐naphthyridine compounds have been synthesized through a facile one‐pot process by the reaction of the corresponding 1,8‐naphthyridines with aliphatic anhydride. The structures were established by spectroscopic data. Further X‐ray crystal analysis of 4′‐acetyl‐7‐methyl‐pyrrolo[1′,5′‐a]‐1,8‐naphthyridine (1) identifies its intriguing molecular structure and reveals the strong π‐π stacking.     

Computational studies on the injection,transport, absorption,and phosphoresce properties of a series of cationic iridium (III) complexes [Ir(C∧N)2(L)2]+ (C∧N = ppy,tpy, dfppy,bzq)

Quantum chemistry methods are applied to investigate the electronic structures, injection and transport properties, absorption and phosphorescence mechanism of a series of Iridium (III) complexes [Ir(C∧N)₂(L)₂]⁺ (L = 4‐pyCO₂Et; C∧N = 2‐phenylpyridine, 1 ; 2‐(4‐tolyl)pyridine, 2 ; 2‐(4,6‐difluorophenyl)pyridimato, 3 ; benzoquinoline, 4 ), which may be used as emitters on organic light emitting diodes (OLEDs). Calculations of ionization potentials and electron affinities are used to evaluate the injection abilities of holes and electrons into these complexes. The reorganization energy (λ) calculations show that the four complexes are suitable as emitters in OLEDs. The absorptions and emissions can be tuned by adding substituent to the ppy ligand or extending the π‐conjugation effect of the C∧N ligand, and quantum yields of 1 – 4 are investigated. In addition, no solvent effect is observed in the absorption and emission spectra. © 2012 Wiley Periodicals, Inc.