气-固流化床反应器内双流体力学模型及其验证 Ⅱ.单组分两维射流床内流场特性分析

由以质量、动量和能量三大守恒定律为基础的湍流两相流理论出发,建立了描述气固流化床内两相流动的数学模型;在微型计算机上编写了相应的数值计算和图形处理程序;为了验证模型的可靠性,本文着手模拟与分析了单组分颗粒体系两维射流流化床内气、固相速度场、空隙度和压力场随时间、空间变化规律;得到了与前人实验结果相吻合的结论。     

NBR/ORGANOMODIFIED BENTONITE INTERCALATED HYBRIDS AND THEIR EFFECTS ON THE TOUGHNESS OF PVC

Hybrids of intercalative nitrile-butadiene rubber/organomodified bentonite (NBR/OMB) were prepared by thelatex intercalation technique. Investigation of their mechanical properties and the microstructore of NBR/OMB showed thatthe organomodified bentonite is an effective toughener for NBR. Transmission electronic microscopy (TEM) and X-rnydiffraction (XRD) tests showed that the NBR macromolecule could be intercalated into the galleries of bentonite.Incorporation of NBR/OMB hybrids as tougheners into poly(vinyl chloride) (PVC) results in a substantial increase in theimpact strength of PVC, but little decrease in its tensile strength and flexural strength, compared to the unmodified PVC.     

REDUCTION OF C=C DOUBLE BOND WITH BOROHYDRIDE EXCHANGE RESIN-TRANSITION METAL COMPOUND SYSTEMS

Borohydride exchange resin-transition metal(Co,Ni,Cu,)compoundsystems reduced C=C double to C-C single bond in ethanol.     

过硫酸铵水溶液对聚乙烯表面作用的研究

本文利用X光电子能谱(XPS)及其它技术对过硫酸铵水溶液处理聚乙烯表面改进粘合性的作用机理进行了研究。结果表明,过硫酸铵的氧化作用使聚乙烯表面引入酮、醛、羧基等含氧基团,使其粘合强度显著提高。高密度聚乙烯表面的氧化深度小于40,低密度聚乙烯的均匀氧化深度在40—90之间。处理后的聚乙烯表面未发现明显的交联产物。     

铁形态分析进展

本文对Fe（Ⅱ）、Fe（Ⅲ）形态分析在1990－2000年间的发展概况作了综述，内容包括分光光度法、色谱法、流动注射分析法等。引用文献53篇。     

A Two-dimensional Lanthanide Coordination Framework with a New Amide-type Tripodal Ligand, 2,2′,2＂-Nitrilotris{[（2′- benzylaminoformyl）phenoxy]ethyl}amine

The La(III) complex with a new amide‐type tripodal ligand,2,2′.2″‐nitrilotris{[(2′‐benzylaminofomyl)‐phenoxylethyl)amine (L), was synthesized and characterized by X‐ray crystallographic analysis. Crystal data: C₄₈H_55.50LaN₇O_18.75, M_r=1169.40, monoclinic. space group, P2₁/n, a= 1.0644(3) nm. b=2.3889(5) nm, c= 2.1917(5) nm, β=90.65°, V=5.573(2) nm³, Z=1, D_c=1.394 g°cm^?3, R₁=0.0487, wR [1>2s?(I)]=0.1266. The results reveal that each La(III) ion binds to 9 oxygen atoms, three of which belong to carbonyl groups from three tripodal ligands and six to three bidentate nitrate groups and a two‐dimensional sheet of 4.8² networks is assembled by metal‐ligand coordination interaction. L, a heptadentate compound, merely acts as a tridentate bridging spacer due to its steric hindrance and links the La(III) ions as three‐connected nodes.     

1-烃基-1-硅杂环丁烷的合成及其Si—H键伸缩振动频率与结构关系的研究

硅杂环丁烷在有机硅化学中是一类非常重要的小分子环系化合物。由于硅杂环丁烷和环丁烷的环张力相似,因而显示出较高的反应活性。例如能与某些试剂作用,生成开环产物;在光解或热解条件下,产生具有Si=C结构的高活性中间体,可用以合成多种有机硅化合物。     

聚丙烯中空纤维膜的微孔结构的控制

通过熔纺／冷拉伸法制备了微孔聚丙烯中空纤维膜。研究了工艺条件对微孔聚丙烯中空纤维膜的微孔结构与性能的影响。结果表明：随着纺丝温度的下降或熔体拉伸比的提高，最大可几孔径及孔隙率增大；熔纺中冷却风速提高，最大可几孔径及孔隙率较大；温度低于110℃时，热处理对最大可几孔径及孔隙率的影响较小，在120－130℃时，随着热处理温度的增加，最大孔径及孔隙率有明显增加的趋势；随着初纺中空纤维拉伸倍数的增加，孔隙率先增加而后下降。     

Cl/Ag体系研究 Ⅱ.Cl吸附引起的表面结构变化

运用LEED,UPS和HREELS等表面技术研究了氯吸附至(c)阶段的Ag(111)表面结构.结果表明,表面上有三维的AgCl(111)生成,其生长按修正的Stranski-Krastanov模式进行.伴随着AgCI(111)生长的同时,表面上产生缺陷.这种缺陷只有在氯吸附至(c)阶段时表面上形成三维AgCI的过程中才能产生,它一旦在表面上形成后,表面上氯的存在与否对其不产生影响.本文提出了一个(c)阶段时的Cl/Ag(111)体系的结构模型.