Rapid Removal of Organics and Oil Spills from Waters Using Silicone Rubber “Sponges”

We have developed a simple, robust, and efficient technology utilizing cheap and recoverable materials based on commercially available silicone elastomer networks for removing organic solvents and crude oil from waters. Hydrophobic and oleophilic properties of silicone elastomers endow poly(dimethyl siloxane) (PDMS) with the capacity to absorb a large variety of organics, including benzene (B), toluene (T), ethylbenzene (E), and xylene (X), commonly referred to as BTEX, and also crude oils, while at the same time enabling the organic “sponges” to float on waters, which facilitates straightforward handling. We developed a method for generating PDMS particles with variable sizes (ranging from hundreds nanometers to few millimeters) by drop-wise depositing siloxane/cross-linker mixtures into warm water, a process which leads to the cross-linking of the PDMS components. We have tested the capability of the PDMS particles to remove toluene and benzene from water. We also performed similar experiments by utilizing PDMS sheets. In both instances we observed a rapid sorption of the organic phase into PDMS; the amount of absorbed organic solvent depended on the concentration in water and the total mass (volume) of PDMS and did not depend on the geometry of the PDMS “sponge.” In addition, we have examined the uptake of toluene and benzene from toluene/benzene (T/B) mixtures dissolved in water. Our results indicate that the amount of benzene absorbed from the T/B mixtures into PDMS increases relative to the uptake from pure benzene/water solutions. This behavior is associated with toluene acting as a “surfactant” that effectively replaces the more unfavorable PDMS/B contacts with less costly T/B ones. Finally, a simple experiment demonstrates qualitatively that PDMS is also capable of removing crude oils from oil-contaminated waters.     

Remediation of soil/concrete contaminated with uranium and radium by biological method

Biological method was studied for remediation of soil/concrete contaminated with uranium and radium. Optimum experiment conditions for mixing ratios of penatron and soil, and the pH of soil was obtained through several bioremediations with soil contaminated with uranium and radium. It was found that an optimum mixing ratio of penatron for bioremediation of uranium soil was 1 %. Also, the optimum pH condition for bioremediation of soil contaminated with uranium and radium was 7.5. The removal efficiencies of uranium and radium from higher concentration of soil were rather reduced in comparison with those from lower concentration of soil. Meanwhile, the removal of uranium and radium in concrete by bioremediation is possible but the removal rate from concrete was slower than that from soil. The removal efficiencies of uranium and radium from soil under injection of 1 % penatron at pH 7.5 for 120 days were 81.2 and 81.6 %, respectively, and the removal efficiencies of uranium and radium from concrete under the same condition were 63.0 and 45.2 %, respectively. Beyond 30 days, removal rates of uranium and radium from soil and concrete by bioremediation was very slow.     

Some key ordered macroporous composites

This review summarizes recent progress of the ordered macroporous composites with the opals and inverse opal structure. Synthesis and performance of the composites are emphasized. Composition of the ordered composites is tunable ranging within metal, metal alloy, metal oxide, polymer, carbon and hydrogel. The ordered structure gives brilliant color effects, which is useful for sensors and photonic crystals. The interconnected macroporous structure provides easiness for mass transportation and species culturing.     

IN SITU OBSERVATION OF MELTING AND CRYSTALLIZATION BEHAVIORS OF POLY(ε-CAPROLACTONE) ULTRA-THIN FILMS BY AFM TECHNIQUE

The melting and crystallization behaviors of poly(ε-caprolactone) (PCL) ultra-thin films with thickness from 15 nm to 8 nm were studied by AFM technique equipped with a hot-stage in real-time. It was found that melting can erase the spherulitic structure for polymer film with high thickness. However, annealing above the melting point can not completely erase the tree-like structure for the thinner polymer film. Generally, the structure formation of thin polymer films of PCL is controlled not only by melting and crystallization but also by dewetting during thermal annealing procedures, and dewetting predominates in the structure formation of ultra-thin films. However, the presence of tree-like morphology at 75 °C may be due to the strong interaction between PCL and mica surface, which may stick the PCL chains onto the mica surface during thermal annealing process. Moreover, the growth of the dendrites was investigated and it was found that crystallization is followed from a dewetted sample, and the branches did not grow with the stems. The crystallization of polymer in the ultra-thin films is a diffusion-controlled process. Both melting and crystallization behaviors of PCL in thin films are influenced by film thickness.     

Liquid crystal alignment properties of 2-naphthoxymethyl-substituted polystyrenes

The liquid crystal (LC) alignment properties of LC cells fabricated with films of 2-naphthoxymethyl-substituted polystyrenes with different contents of naphthoxymethyl side groups were investigated. The polymer films exhibited good optical transparency in the visible light region (400–700 nm). The LC cells made from the unrubbed films of polymers having more than 57 mol%?of 2-naphthoxymethyl containing monomeric units showed homeotropic LC alignment with a high pretilt angle of about 90^o. Good electro-optical characteristics, such as the threshold voltage, response time, voltage holding ratio and residual DC voltage were observed for the LC cells fabricated with the polymer having 100 mol%?of 2-naphthoxymethyl containing monomeric units as an LC alignment layer.     

Magnetic field induced Freedericksz transition of a planar aligned liquid crystal doped with metalloporphyrins FeTPPCl,MnTPPCl and ZnTPP

We observed that the planar aligned nematic liquid crystal (5CB) doped with a volume fraction of 1% of FeTPPCl [5,10,15,20-tetraphenylporphyriniron(III)chloride] or MnTPPCl [5,10,15,20-tetraphenylporphyrinmanganese(III)chloride] dramatically decreased the critical magnetic field for the magnetic field induced Freedericksz transition, while 5CB doped with ZnTPP [5,10,15,20-tetraphenylporphyrinzinc(II)] revealed no such effect, when compared with pure 5CB. In the guest-host (5CB) system, FeTPPCl and MnTPPCl as guests are both strong paramagnetic materials with an interaction through coordination of the -CN group in 5CB onto the metal ion of the porphyrin. As a result, the 5CB molecules are dragged to reorientate under a static magnetic field, while ZnTPP is a diamagnetic material without such a property. This phenomenon concerning magneto-optical components could be useful in liquid crystal displays.     

Synthesis and characterisation of photopolymerisable liquid crystals based on the π-extended fluorene core and their corresponding non-reactive analogues

We have synthesised a series of new reactive mesogens with photopolymerisable di-acrylates and their corresponding non-reactive analogues based on the π-conjugated aromatic core, fluorene (F)-di-[thiophene (T)-benzene (B)], using the Stille and Suzuki coupling reaction. The effect of lateral alkyl chains on the 9-position of the central fluorene moiety as well as α, ω- side alkyl chains attached to the π-conjugated aromatic core on the mesomorphism was investigated by utilising differential scanning calorimetry (DSC) and polarising optical microscopy (POM). A wide angle X-ray scattering (WAXS) study at the various temperatures was also carried out to reveal phase structures. Photopolymerisable di-acrylates connected directly to the rigid aromatic core showed higher phase transition temperatures, probably due to the induced dipole moment in comparison with those of a non-reactive methyl–ether counterpart.     

Investigation on ion movement in the fringe-field switching mode depending on resistivity of alignment layer and dielectric anisotropic sign of liquid crystal

Adsorption and desorption of ions at interface between liquid crystal and alignment layer in liquid crystal displays play a crucial role in residual direct current voltage associated with image sticking. In this article, the dependency of such adsorption and desorption of ions on resistivity of alignment layer and sign of liquid crystal dielectric anisotropy in the fringe-field liquid crystal cell has been investigated. Our studies show that the time constant of ions during adsorption and desorption depends upon resistivity and dielectric constant of liquid crystal and alignment layer, and most strongly influenced by the resistivity of alignment layer such that the one with lower resistivity in two orders shows much faster adsorption and desorption at the interface than that of the one with higher resistivity.     

Expression of Cholera Toxin B–Lumbrokinase Fusion Protein in Pichia pastoris—The Use of Transmucosal Carriers in the Delivery of Therapeutic Proteins to Protect Rats Against Thrombosis

Cholera toxin B-subunit (CTB) has been widely used to facilitate antigen delivery by serving as an effective mucosal carrier molecule for the induction of oral tolerance. However, whether CTB can be used as a transmucosal carrier in the delivery of not only vaccines but also therapeutic proteins has not been widely studied. Thus, we investigate here the concept of receptor-mediated oral delivery of lumbrokinase (LK) proteins which is an important fibrinolytic enzyme derived from earthworm. CTB and LK, separated by a furin cleavage site, was expressed via Pichia pastoris. The activity and proper folding of recombinant protein in yeast were confirmed by Western blot analysis, fibrin plate assays, and G_M1-ganglioside ELISA. Following oral administration of recombinant protein, the thrombosis model of rats and mice revealed that the oral treatment of rCTB–LK has a more significant anti-thrombotic effect on animals compared with rLK. It is possible to conclude that CTB can successfully enhance its fusion protein LK to be absorbed. The use of CTB as a transmucosal carrier in the delivery of not only vaccines but also therapeutic proteins was supported.     

Silaffin Peptides as a Novel Signal Enhancer for Gravimetric Biosensors

Application of biomimetic silica formation to gravimetric biosensors has been conducted for the first time. As a model system, silaffin peptides fused with green fluorescent protein (GFP) were immobilized on a gold quartz crystal resonator for quartz crystal microbalances using a self-assembled monolayer. When a solution of silicic acid was supplied, silica particles were successfully deposited on the Au surface, resulting in a significant change in resonance frequency (i.e., signal enhancement) with the silaffin–GFP. However, frequency was not altered when bare GFP was used as a control. The novel peptide enhancer is advantageous because it can be readily and quantitatively conjugated with sensing proteins using recombinant DNA technology. As a proof of concept, this study shows that the silaffin domains can be employed as a novel and efficient biomolecular signal enhancer for gravimetric biosensors.