氢气的分析方法研究

介绍了低纯度氢气和高纯度氢气的不同分析检测方法。对于纯度小于99.99%的氢气,其分析方法主要有爆炸法、吸收法、膜分离法和气相色谱法;对于纯度大于99.99%的氢气,其分析方法主要有变温浓缩的热导池气相色谱法、配有光电离子化检测器(DID)的气相色谱法和色谱-质谱联用法。     

α-Fe_2O_3,γ-Al_2O_3纳米粒子及其混合体系酸碱性质及对重金属离子的吸附行为

运用自动电位滴定技术分别研究了在纳米α-Fe2O3,γ-Al2O3单一体系及其混合体系中矿物表面的酸碱性质。依据表面配位理论恒电容模式,计算了相应的表面酸碱配位常数。实验和计算结果表明,按照等表面积原则混合α-Fe2O3、γ-Al2O3纳米粒子得到混合体系,其表面化学反应并非是单一体系的简单叠加,而是存在着不同矿物表面间复杂的交互作用。其表面酸碱性质和吸附重金属离子的行为可以用单表面模型拟合,混合体系表面反应平衡模式和相应的酸碱反应平衡常数分别为:≡XOH+H+≡XOH2+lgK1=4.04≡XOH≡XO-+H+lgK2=-9.20根据重金属离子Cu2+、Pb2+、Zn2+在α-Fe2O3/γ-Al2O3混合体系表面的吸附行为,计算得出Cu2+、Pb2+、Zn2+在混合体系固体表面的配位反应平衡常数如下:≡XOH+M2+≡XOM++H+lgK=-2.50、-2.25、-3.75(M=Cu、Pb、Zn)     

High-performance liquid chromatographic enantioseparation of β-amino acids using a long-tethered (+)-(18-crown-6)-2,3,11,12-tetracarboxylic acid-based chiral stationary phase

Reversed-phase high-performance liquid chromatographic methods were developed for the separation of enantiomers of eleven unnatural β²-amino acids on a new chiral stationary phase, using the 11-methylene-unit spacer of aminoundecylsilica gel for the bonding of (+)-(18-crown-6)-2,3,11,12-tetracarboxylic acid as selector. The nature and concentration of the acidic and organic modifiers, the pH, the mobile phase composition, and the structures of the analytes substantially influenced the retention and resolution. Separations were carried out at constant mobile phase compositions in the temperature range 7–40 °C and the changes in enthalpy, Δ(ΔH°), entropy, Δ(ΔS°), and free energy, Δ(ΔG°) were calculated. The elution sequence was determined in some cases: the S enantiomers eluted before the R enantiomers.     

Polymethacrylate monolithic and hybrid particle-monolithic columns for reversed-phase and hydrophilic interaction capillary liquid chromatography

We prepared hybrid particle-monolithic polymethacrylate columns for micro-HPLC by in situ polymerization in fused silica capillaries pre-packed with 3–5 μm C₁₈ and aminopropyl silica bonded particles, using polymerization mixtures based on laurylmethacrylate–ethylene dimethacrylate (co)polymers for the reversed-phase (RP) mode and [2-(methacryloyloxy)ethyl]-dimethyl-(3-sulfopropyl) zwitterionic (co)polymers for the hydrophilic interaction (HILIC) mode. The hybrid particle-monolithic columns showed reduced porosity and hold-up volumes, approximately 2–2.5 times lower in comparison to the pure monolithic columns prepared in the whole volume of empty capillaries. The elution volumes of sample compounds are also generally lower in comparison to packed or pure monolithic columns. The efficiency and permeability of the hybrid columns are intermediate in between the properties of the reference pure monolithic and particle-packed columns. The chemistries of the embedded solid particles and of the interparticle monolithic moiety in the hybrid capillary columns contribute to the retention to various degrees, affecting the selectivity of separation. Some hybrid columns provided improved separations of proteins in comparison to the reference particle-packed columns in the reversed-phase mode. Zwitterionic hybrid particle-monolithic columns show dual mode retention HILIC/RP behaviour depending on the composition of the mobile phase and allow separations of polar compounds such as phenolic acids in the HILIC mode at lower concentrations of acetonitrile and, often in shorter analysis time in comparison to particle-packed and full-volume monolithic columns.     

Palladium nanoclusters entrapped in polyurea: A recyclable and efficient catalyst for reduction of nitro-benzenes and hydrodechlorination of halogeno-benzenes

Polyurea-entrapped palladium nanoclusters have been prepared by interfacial polymerization in W/O emulsion and showed high thermal stability and chemical stability with the content of 0.12 mmol g^?1 Pd. This catalyst exhibited dual catalytic activity for reduction of nitro compounds and hydrodehalogenation of aromatic chlorides in atmospheric hydrogen with 100% yield for reduction of nitro compounds and >99% yield for hydrodehalogenation of aromatic chlorides. This immobilizing method was particularly effective and eliminated the need of special chelating groups.     

Hydroxy peroxy nitrites and nitrates from OH initiated reactions of isoprene

The reaction of hydroxy peroxy radicals (RO(2)) with NO represents one of the most crucial tropospheric processes, leading to terrestrial ozone formation or NO(x)() removal and chain termination. We investigate the formation of hydroxy peroxy nitrites (ROONO) and nitrates (RONO(2)) from the OH-isoprene reactions using DFT and ab initio theories and variational RRKM/master equation (vRRKM/ME) formalism. The binding energies of ROONO from NO addition to RO(2) are determined to be in the range of 20-22 kcal mol(-)(1), and the bond dissociation energies of ROONO to form an alkoxy radical (RO) and NO(2) range from 6 to 9 kcal mol(-)(1). Isomerization of ROONO to RONO(2) is exothermic by 22-28 kcal mol(-)(1). The entrance and exit channels of the RO(2)-NO reaction are found to be barrierless, and the rate constants to form ROONO are calculated to be 3 x 10(-)(12) to 2 x 10(-)(11) cm(3) molecule(-)(1) s(-)(1) using the canonical variational transition state theory. The vRRKM/ME analysis reveals negligible stabilization of excited ROONO and provides an assessment of ROONO isomerization to RONO(2).     

A Magnesium-Selective Ionophore Containing Four Amide Carbonyl Ligands Derived from L-Tartaric Acid and Axial Furano Oxygen Binding Sites

Octahedrally converging hexadentate macrocyclic receptors 1 and 2, based on L-tartaric acid and furanmoieties, were synthesized andtheir complexation properties studied. In this paper,magnesium ion selectivitiesdetermined by ISE experiments, chiroptical changes observedby circular dichroism(CD) on complexation, and association constants measuredby NMR titration arediscussed.     

Low-temperature suspension polymerization of vinyl pivalate for the preparation of syndiotacticity-rich ultrahigh molecular weight poly(vinyl alcohol) microfibrils with high yield

To prepare ultrahigh molecular weight (UHMW) poly(vinyl pivalate) (PVPi) with high conversion and high linearity for a precursor of syndiotacticity-rich UHMW poly(vinyl alcohol) (PVA), vinyl pivalate (VPi) was suspension polymerized using a low-temperature initiator, 2,2'-azobis(2,4-dimethylvaleronitrile) (ADMVN), and the effects of polymerization conditions on the polymerization behavior and molecular structures of PVPi and PVA prepared by saponifying PVPi were investigated. Suspension polymerization was slightly inferior to bulk polymerization in increasing the molecular weight of PVA. In contrast, the former was superior in increasing the conversion of the polymer. Suspension polymerization of VPi at 25 °C by controlling various polymerization factors proved to be successful in obtaining PVA of UHMW (number-average degree of polymerization (P_n): 14,700-16,700), high syndiotactic diad content (62%), and of high yield (ultimate conversion of VPi into PVPi: 85-90%). In the case of bulk polymerization of VPi under the same conditions, maximum P_n, conversion of 15,800-17,000, and 25-35% were obtained, respectively. The degree of branching was lower and the P_n and syndiotacticity were higher with PVA prepared from PVPi polymerized at lower temperatures. All PVAs from PVPi suspension-polymerized at 25 °C were fibrous, with a high degree of crystallinity and orientation of the crystallites.     

Separation of 99Mo from a simulated fission product solution by precipitation with a-benzoinoxime

The formation property of Mo precipitate was investigated and improved the existing process was using H₂O₂ that acts as an interfering compound in a subsequent alumina adsorption process. The property of the Mo precipitate was investigated by using SEM, FTIR, TG-DTA, and XRD. The simulated solution consisted of 1M nitric acid containing seven elements (Mo, I, Ru, Zr, Ce, Nd, Sr) and their radioactive tracers. As a result, the precipitate was composed of the Mo precipitate and re-precipitated a-benzoinoxime which was added excessively for increasing the precipitation efficiency. It was confirmed that the Mo precipitate was formed by the reaction of two a-benzoinoxime molecules and one MoO₂ ²⁺. Molybdenum precipitate was dissolved in 0.4M NaOH solution within 5 minutes without H₂O₂. Hydrogen peroxide induced only the rapid dissolution of the a-benzoinoxime re-precipitate. Also, the dissolution method without H₂O₂ was favorable in the purification aspect because Zr and Ru were contained as a small fraction of 1.3% and 7.7%, respectively, in the dissolving solution.