Synthesis of one-dimensional graphene-encapsulated TiO2 nanofibers with enhanced lithium storage capacity for lithium-ion batteries

Journal of Solid State Electrochemistry - The one-dimensional graphene/TiO2 composite nanofibers with the unique microstructures have been successfully synthesized via an efficient method and...     

Distribution of trace elements in flowing surface waters: Effect of seasons and anthropogenic practices in India

This study reports the distribution of Cr, Ni, Cu and Pb in waters, sediments, macrophytes and fish of the Yamuna River’s patch in Delhi (India). This is one of the most polluted stretches of rivers in the world. Water from this river is used fosr irrigation, industrial and domestic purposes, including drinking water. The effects of season and anthropogenic practices were identified. Almost zero dissolved oxygen and high levels of lead and phosphate indicate the polluted state of the aquatic system. The enrichment factors in sediments (with respect to reference site) vary in the range of 0.60–82.9% (Cr), 1.40–90.5% (Ni), 1.00–85.3% (Cu) and 3.80–86.6% (Pb). The toxic effects due to Ni and Pb could frequently be visible in aquatic life as their values fall above the probable effect level (36 mg Kg^?1 for Ni and 91.3 mg Kg^?1 for Pb). The metal contents in the macrophyte (Eichhornia crassipes) and the fish (Oreochromis niloticus) generally increase in the summer season. Cu and Pb accumulate preferentially in E. crassipes. The fish from these waters is unsuitable for human consumption as the levels of Cr, Cu and Pb are above the recommended limits. Significant spatial variations in parameters of water and sediments were confirmed via one-way analysis of variance. The Pearson’s correlation analysis suggests a common source of some of the metals. Principal component analysis highlighted domestic, and industrial waste and coal-fired thermal power plants as the metal sources. This study might act as a benchmark for other investigations focused on similarly affected surface aquatic systems due to agricultural and industrial activities.     

Further results on stabilization of neural-network-based systems using sampled-data control

Nonlinear Dynamics - This paper investigates the problem of stabilization for sampled-data neural-network-based systems under variable sampling. A novel Lyapunov–Krasovskii functional (LKF)...     

Real‐Time Measurement of the Size Distribution of Diesel Exhaust Particles using a Portable 4‐stage Electrical Low Pressure Impactor

For this study, a 4 stage electrical low pressure impactor was designed to measure the real‐time size distribution of diesel particulate matter (DPM). For the performance evaluation, sodium chloride (NaCl) particles and dioctyl sebacate (DOS) particles were used. After evaluating the collection efficiency of each stage of the impactor, the size distributions of test particles were estimated using electrical current data and their inversion algorithm, and this was found to agree with the results obtained by a scanning mobility particle sizer (SMPS). For measurement of DPM, a common‐rail direct injection (CRDI) diesel engine, for engine speeds of 1,200 rpm and 1,500 rpm at 2.7 kgf·m, was used. Therefore, it was found that the size distribution of the DPM could be easily obtained, with the currents measured by the impactor and the data inversion algorithm, in less than 5 seconds. Furthermore, the effective density of the DPM could be obtained using the calculated results and the SMPS data.     

Black phosphorus saturable absorber for ultrafast mode‐locked pulse laser via evanescent field interaction

Black phosphorus, or BP, has found a lot of applications in recent years including photonics. The most recent studies have shown that the material has an excellent optical nonlinearity useful in many areas, one of which is in saturable absorption for passive mode‐locking. A direct interaction scheme for mode‐locking, however, has a potential to optically cause permanent damage to the already delicate material. Evanescent field interaction scheme has already been proven to be a useful method to prevent such danger for other 2‐dimensional nanomaterials. In this report, we have utilized the evanescent field interaction to demonstrate that the optical nonlinear characteristics of BP is sufficiently strong to use in such an indirect interaction method. The successful demonstration of the passive mode‐locking operation has generated pulses with the pulse duration, repetition rate, and time bandwidth product of 2.18 ps, 15.59 MHz, and 0.336, respectively.     

Site‐specific reversible immobilization and purification of His‐tagged protein on poly(2‐acetamidoacrylic acid) hydrogel beads

Ni²⁺‐complexed poly(2‐acetamidoacrylic acid) (PAAA) hydrogel beads were developed for the site‐specific reversible immobilization and purification of the histidine‐tagged green fluorescent protein (His‐tagged GFP). PAAA hydrogel beads were prepared by photopolymerization, and significantly improved mechanical properties of PAAA hydrogel beads were observed in comparison with PAAA hydrogel from our previous study. Confocal laser scanning microscopy was used to determine the binding of His‐tagged GFP to the hydrogel beads in three‐dimensional space. Photoluminescence spectroscopy revealed 89% of binding efficiency of His‐tagged GFP to the Ni²⁺‐PAAA hydrogel beads, 51% of yielding recovery. The maximum binding capacity of His‐tagged GFP was estimated to be 0.45 µg/mg of Ni²⁺‐PAAA hydrogel beads. The recombinant His‐tagged GFP from the soluble fraction of E. coli BL21(DE3) cell lysates was purified with Ni²⁺‐PAAA hydrogel beads. The major advantage of the Ni²⁺‐PAAA hydrogel beads system was simple preparation procedures of producing the matrix, because PAAA hydrogel beads had relatively enhanced mechanical strength than soft hydrogels. Copyright © 2012 John Wiley & Sons, Ltd.     

Characterization of Nitro-Substituted Polybenzimidazole Synthesized by the Reaction with Nitric Acid

Abstract

Nitro-substituted poly[2,2′-(m-phenylene)-5,5′-bibenzimidazole]s (PBIs) were synthesized by the reaction of PBI with nitric acid in sulfuric acid under various conditions. The number of nitro groups substituted on the aromatic ring of PBI per polymeric unit varied from 1.44 to 3.55 according to the reaction conditions. An increase in reaction temperature and concentration of the nitric acid increased the degree of substitution. The inherent viscosity of the substituted polymer increased as the reaction temperature decreased. When the reaction temperature was 30°C, the inherent viscosity of the polymer increased as the concentration of nitric acid increased. The nitro-substituted PBI exhibited polyelectrolyte behavior in formic acid. The nitro groups substituted on PBI were dissociated when the polymer was heated to 450°C, displaying exothermic behavior, and the decomposition of polymer was proportional to its nitro group content. All nitro-substituted PBIs showed better solubilities in polar aprotic and acidic solvents, such as dimethylacetamide, dimethylsulfoxide, dimethylformamide, N-methylpyrrolidone, formic acid, sulfuric acid, and trifluoromethanesulfonic acid.     

Composite of SiO2 and Hydrogel Having Microphase Separated Structure: Physical Properties Dependence on pH

Abstract

Organic-inorganic composite gel was prepared by using PEG-modified urethane acrylate (PMUA) gel and tetraethoxysilane (TEOS). PMUA gel was prepared by the phase-inversion emulsion polymerization of PMUA emulsion. The gelation of PMUA emulsion using this method enables PMUA gel to swell with H₂O, TEOS, and ethanol. Hydrolysis and condensation reaction rates of the sol-gel process are strongly influenced by the pH controlled by catalysts such as HCl and NH₄OH. Additionally, the morphology on the cross section of composite and the amount of silica ingredient incorporated into the composite gel were dependent on solvent, the molar ratio of H₂O to TEOS, as well as the pH value.

As the silica content increased, due to hydrogen bonds interacting between PMUA gel and SiO₂, particles, the tensile strength of composites considerably increased, whereas the elongation at break decreased. The incorporation of silica ingredient in PMUA gel/silica composites was verified with FTIR/ATR and SEM. The amount of the silica component in the composite was indirectly investigated by using TGA thermal analysis.     

Preparation and solution properties of a novel cationic hydrophobically modified polyacrylamide for enhanced oil recovery

Abstract

A novel cationic water-soluble monomer allyldimethylisooctylammonium bromide (ADIAB) containing a short-chain alkane was synthesized successfully. This monomer was copolymerized with acrylamide and sodium acrylate to produce hydrophobically modified polyacrylamide (HMPAM) using solution polymerization without surfactants. The structures of monomer ADIAB and HMPAM were characterized with infrared spectroscopy and nuclear magnetic resonance spectroscopy. Influence of preparation condition on viscosities of products was studied. The aqueous solution viscosity of the terpolymer was also investigated as functions of concentration, temperature and salinity. The results showed that when the temperature exceeds the 60?°C and NaCl concentration exceeds about 2000?mg/L, the temperature and salt tolerance characters of terpolymer were demonstrated. The enhanced oil recovery tests were initially carried out using homogeneous sandpack models.