An Economical Magnetocardiogram System Based on High-To SQUIDs

An economical magnetocardiogram （MCG） system is built in our laboratory. It mainly consists of a MCG data acquisition stage equipped with two high-To superconducting quantum interference device （SQUID） magnetometers, a data processing stage with digital filtering and a one-layer μ-metal magnetically shielded room in conjunction with a high-Tc SQUID based active compensation. Experimental results show that a noise level of pico-tesla in MCG profiles, which is necessary for clinical applications, may be achieved with the system. Moreover, stable and convenient operations of the system are demonstrated with simulating MCG measurements.     

Carathéodory's method for a class of second order differential equations on the half-line

The method of equivalent variational methods, originally due to Carathéodory for free problems in the calculus of variations is extended to investigate boundary value problems for a class of second order differential equations on the half-line. Some applications are presented to illustrate the potential of this method.     

Parton-hadron duality in event generators

The validity of local parton-hadron duality within the framework of HERWIG and JETSET event generators is investigated. We concentrate one ⁺ e ^– annihilations in LEP 2 energy range as these interactions provide theoretically the cleanest condition for the discussion of this concept. We conclude that the concept of local parton-hadron duality is not valid in either of the two generators considered.     

预测气吹精密播种机排种质量的一种简易方法

通过对气吹式精密播种机田间试验资料的相关分析，发现合格指数Ａ与｜Ｄ－Ｍ｜（重播指数与漏播指数之差的绝对值）之间里极显著负相关（ｒ＝－０．９３１２）。在对数据作进一步回归分析的基础上，本文建立了一套“由排种粒数预测排种质量”的方法。     

Effect of carbon content on the microstructure and the cracking susceptibility of Fe-based laser-clad layer

The laser cladding of Fe-based alloys on a medium carbon steel substrate was performed using a CO₂ laser and Ar shielding gas that was blown into a molten pool. The microstructure and cracking susceptibility of the laser-clad layers were studied in terms of carbon additions. Results show that the small change of the carbon content in the alloy powders can obviously change the microstructure and properties of the layers. When the carbon content is in the range of 0.3–0.4 wt.%, the decrease of the carbon content in alloy powders will increase the hardness and toughness of the layers simultaneously under the same process parameters. As a result, crack-free coatings with high hardness can be obtained. As the carbon content increases from 0.2 wt.% to 0.4 wt.%, the segregation ratio of chromium increases, while the segregation ratios of nickel, manganese, and silicon first decrease and then increase. At the same time, a new designing principle concerning the composition and microstructure has been put forward, and the principal mechanisms of strengthening and toughening of the layers are fine-grain strengthening and low carbon martensitic phase transformation strengthening.     

The effect of Cu substitution on the A1g mode of La0.7Sr0.3MnO3 manganites

We report on the first Raman data of Cu substituted La_1−ySr_yMn_1−xCu_xO₃ (0≤x≤0.10 and 0.17≤y≤0.3, accordingly in order to have the same Mn⁴⁺/[Mn⁴⁺+Mn³⁺] ratio), collected in the frequency range 100-900 cm⁻¹ and at room temperature, with parallel (e_i∥e_s) and crossed (e_i⊥e_s) polarizations of the incident (e_i) and scattered (e_s) light. Spectra were fitted with a Drude-Lorentz model, and peaks at 190-220 and 430 cm⁻¹, together with two broad structures centered at near 500 and 670 cm⁻¹, have been found. We also have observed that the A_1g mode is substantially shifted with increasing Cu substitution. The A_1g phonon shift is a linear function of the tolerance factor t and the rhombohedral angle α_r, thus following the structural changes of the MnO₆ octahedra in the system.     

Strong visible PL from the nc-Si thin film by Ni silicide mediated crystallization

We studied the growth of nanocrystalline silicon (nc-Si) thin film exhibiting a strong room temperature photoluminescence (PL) at 1.81–2.003 eV. The amorphous silicon was crystallized by Ni silicide mediated crystallization (Ni SMC) and then Secco-etched to exhibit the PL. The PL peak energy and intensity increase with increasing the metal density on the a-Si because of the reduction in the grain size down to 2 nm. The photoluminescence energy and peak intensity depend strongly on the Secco etch time because the grain size is reduced by etching the grain boundaries.     

Quantum Nonlocality of Photon Pairs in Interference in a Mach-Zehnder Interferometer

Nonlocal character of entangled photon pairs generated in spontaneous parametric downconversion is demonstrated. One photon from a pair propagates through a Mach-Zehnder interferometer and is detected in coincidence-count measurement with its twin. Width of the coincidence-count interference pattern (measured for various values of path difference in the Mach-Zehnder interferometer) depends on spectral width of the twin as a result of entanglement of photons in a pair. The experimental setup is analyzed for a Gaussian spectral filter and a Fabry-Perot resonator. It is shown that nonlocal interference is much stronger for cw pumping in comparison with femtosecond pulsed pumping for values of parameters commonly used in spontaneous parametric downconversion experiments.     

Ionic liquid-regulated sulfamic acid: chemoselective catalyst for the transesterification of β-ketoesters

1-Propyl-3-methylimidazolium chloride ([C₃MIm]Cl) ionic liquid and sulfamic acid (NH₂SO₃H), as a synergetic catalytic medium, were used for the transesterification of acetoacetate with alcohols of different structures. It shows the good ability for the chemoselective transesterificatin of β-ketoesters and maintains its catalytic activity in the reuse.