Estimation of electronic coupling for intermolecular electron transfer from cross-reaction data

Sixty-five electron-transfer reactions including 27 new 0, +1 couples have been added to our data set of cross-reactions between 0 and +1 couples, bringing it to 206 reactions involving 72 couples that have been studied by stopped-flow kinetics in acetonitrile containing supporting electrolyte at 25 degrees C, formal potentials determined by cyclic voltammetry, and analyzed using Marcus cross-rate theory. Perhaps surprisingly, a least-squares analysis demonstrates that intrinsic rate constants exist that predict the cross-rate constants to within a factor of 2 of the observed ones for 93% of the reactions studied, and only three of the reactions have a cross-rate constant that lies outside of the factor of 3, that corresponds to a factor of 10 uncertainty in the rate constant for an unknown couple. Many triarylamines, which have very high intrinsic reactivity, are included among the newly studied couples. The enthalpy contribution to the Marcus reorganization energy, lambda'v, has been calculated for 46 of the couples studied, at the (U)B3LYP/6-31+G (or for the larger and lower barrier compounds, at the less time-consuming (U)B3LYP/6-31G) level. In combination with a modified Levich and Dogodnadze treatment that assumes that the rate constant is proportional to (KeHab2/lambda1/2) exp[-DeltaG/RT], this allows estimation of the electronic coupling (Hab) at the transition state for intermolecular electron transfer, (more properly H'ab, the product of the square root of the encounter complex formation constant times Hab) for these couples. Although the principal factor affecting intermolecular electron-transfer rate constants is clearly lambda, H'ab effects are easily detectable, and the dynamic range in our estimates of them is over a factor of 600.     

Selective Formation of Metastable Ferrihydrite in the Chiton Tooth

Metastable precursors are thought to play a major role in the ability of organisms to create mineralized tissues. Of particular interest are the hard and abrasion‐resistant teeth formed by chitons, a class of rock‐grazing mollusks. The formation of chiton teeth relies on the precipitation of metastable ferrihydrite (Fh) in an organic scaffold as a precursor to magnetite. In vitro synthesis of Fh under physiological conditions has been challenging. Using a combination of X‐ray absorption and electron paramagnetic resonance spectroscopy, we show that, prior to Fh formation in the chiton tooth, iron ions are complexed by the organic matrix. In vitro experiments demonstrate that such complexes facilitate the formation of Fh under physiological conditions. These results indicate that acidic molecules may be integral to controlling Fh formation in the chiton tooth. This biological approach to polymorph selection is not limited to specialized proteins and can be expropriated using simple chemistry.     

The Potent Oxidant Anticancer Activity of Organoiridium Catalysts

Platinum complexes are the most widely used anticancer drugs; however, new generations of agents are needed. The organoiridium(III) complex [(η⁵‐Cp^xbiph)Ir(phpy)(Cl)] ( 1‐Cl ), which contains π‐bonded biphenyltetramethylcyclopentadienyl (Cp^xbiph) and C^N‐chelated phenylpyridine (phpy) ligands, undergoes rapid hydrolysis of the chlorido ligand. In contrast, the pyridine complex [(η⁵‐Cp^xbiph)Ir(phpy)(py)]⁺ ( 1‐py ) aquates slowly, and is more potent (in nanomolar amounts) than both 1‐Cl and cisplatin towards a wide range of cancer cells. The pyridine ligand protects 1‐py from rapid reaction with intracellular glutathione. The high potency of 1‐py correlates with its ability to increase substantially the level of reactive oxygen species (ROS) in cancer cells. The unprecedented ability of these iridium complexes to generate H₂O₂ by catalytic hydride transfer from the coenzyme NADH to oxygen is demonstrated. Such organoiridium complexes are promising as a new generation of anticancer drugs for effective oxidant therapy.     

Ultrasound‐assisted emulsification microextraction coupled with high‐performance liquid chromatography for the simultaneous determination of fragrance allergens in cosmetics and water

A simple, inexpensive, and environmentally friendly method based on ultrasound‐assisted emulsification microextraction followed by solidification of floating organic drop and high‐performance liquid chromatography coupled to diode array detection was developed for the simultaneous determination of 18 potentially allergenic fragrance substances. Several parameters affecting the microextraction process were investigated in detail by the “one‐variable‐at‐a‐time” approach. Optimal conditions were the following: 50 μL of 2‐dodecanol as extraction solvent, 10 mL of sample containing 150 g/L of salt, and 5 min of sonication at 35°C. Under the optimized conditions, method showed good linearity in the selected ranges, with squared correlation coefficients ranging from 0.948 to 0.999. Limits of detection ranged from 0.001 to 0.154 μg/mL and enrichment factors from 9 to 237. Precision of the method, expressed as relative standard deviation, was checked at two levels obtaining good results (3.3–14.4%). Recovery studies were made in baby bath water and in eau de cologne showing acceptable accuracy. Finally, the developed method was successfully applied to different commercial cosmetic and water samples. The most commonly found analyte was linalool followed by cinnamal and lilial. Most of the analyzed samples contained at least one of the target compounds.     

[12] ane N_3-based BODIPY as a selective and sensitive off–on sensor for the sequential recognition of Cu~(2+) ions and ADP

A novel [12]aneN3-based BODIPY sensor 1 can be applied in the sequential recognition of Cu2 and ADP in aqueous solution and living cells with high selectivity and sensitivity     

Free radical polymerization of caffeine‐containing methacrylate monomers

The incorporation of acrylic functionality into caffeine enables the preparation of a vast array of novel thermoplastics and thermosets. A two‐step derivatization provided a novel caffeine‐containing methacrylate monomer capable of free radical polymerization. Copolymers of 2‐ethylhexyl methacrylate and caffeine methacrylate (CMA) allowed for a systematic study of the effect of covalently bound caffeine on polymer properties. ¹H NMR and UV‐vis spectroscopy confirmed caffeine incorporation at 5 and 13 mol %, and SEC revealed the formation of high molecular weight (co)polymers (>40,000 g/mol). CMA incorporation resulted in a multistep degradation profile with initial mass loss closely correlating to caffeine content. Differential scanning calorimetry, rheological, and thermomechanical analysis demonstrated that relatively low levels of CMA increased the glass transition temperature, resulting in higher moduli and elucidating the benefits of incorporating caffeine into polymers. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2829–2837     

Non‐Hydrolyzable RNA–Peptide Conjugates: A Powerful Advance in the Synthesis of Mimics for 3′‐Peptidyl tRNA Termini

Translation of specific small peptides on the ribosome can confer resistance to macrolide antibiotics. To reveal the molecular details of this and related phenomena, stable RNA–peptide conjugates that mimic peptidyl‐tRNA would be desirable, especially for ribosome structural biology. A flexible solid‐phase synthesis strategy now allows efficient access to these highly requested derivatives without restriction on the RNA and peptide sequences.

     

Modeling the resting state of oxalate oxidase and oxalate decarboxylase enzymes

In view of the biological and commercial interest in models for Oxalate Decarboxylases (OxDC) and Oxalate Oxidases (OxOx), we have synthesized and characterized three new Mn (II) complexes ( 1- 3) employing N3O-donor amino-carboxylate ligands (TCMA, 1,4,7-triazacyclononane- N-acetic acid; K (i) Pr 2TCMA, potassium 1,4-diisopropyl-1,4,7-triazacyclononane- N-acetate; and KBPZG, potassium N,N-bis(3,5-dimethylpyrazolyl methyl)glycinate). These complexes were characterized by several techniques including X-ray crystallographic analysis, X-band electron paramagnetic resonance (EPR), electrospray ionization mass spectrometry (ESI-MS), and cyclic voltammetry. The crystal structures of 1 and 3 revealed that both form infinite polymeric chains of Mn (II) complexes linked by the pendant carboxylate arms of the TCMA (-) and the BPZG (-) ligands in a syn-antipattern. Complex 2 crystallizes as a mononuclear Mn (II) cation, six-coordinate in a distorted octahedral geometry. Although complexes 1 and 3 crystallize as polymeric chains, all compounds present the same N3O-donor set atoms around the metal center as observed in the crystallographically characterized OxDC and OxOx. Moreover, complex 2 also contains two water molecules coordinated to the Mn center as observed in the active site of OxDC and OxOx. ESI-MS spectrometry, combined with EPR, were useful techniques to establish that complexes 1- 3 are present as mononuclear Mn (II) species in solution. Finally, complexes 1- 3 are able to model the resting state active sites, with special attention focused on complex 2 which provides the first exact first coordination sphere ligand structural model for the resting states of both OxDC and OxOx.     

Stereodynamics of 9,11-Diphenyl-10-azatetracyclo[6.3.0.0.(4,11)0.(5,9)]undecanes. Highly Restricted Nitrogen Inversion and Isolated Phenyl Rotation. X-ray Crystallographic, Dynamic NMR, and Molecular Mechanics Studies

The (1)H NMR spectra of 10-benzyl-9,11-diphenyl-10-azatetracyclo[6.3.0.0.(4,11)0.(5,9)]undecane (BnPh(2)()) and 10-methyl-9,11-diphenyl-10-azatetracyclo[6.3.0.0.(4,11)0.(5,9)]undecane (MePh(2)()) decoalesce due to slowing inversion at nitrogen and to slowing isolated bridgehead phenyl rotation. The high nitrogen inversion barriers in MePh(2)() (DeltaG() = 12.2 +/- 0.1 kcal/mol at 250 K) and BnPh(2)() (DeltaG() = 10.6 +/- 0.1 kcal/mol at 215 K) are typical of tertiary amines in which at least one C-N-C bond angle is constrained to a small value. Compared to the minuscule rotation barriers about sp(2)-sp(3) carbon-carbon bonds in simple molecular systems, the bridgehead phenyl rotation barriers in MePh(2)() (DeltaG() = 9.8 +/- 0.1 kcal/mol at 210 K) and BnPh(2)() (DeltaG() = 9.8 +/- 0.1 kcal/mol at 210 K) are unusually high. Molecular mechanics calculations (MMX force field) suggest that the origin of the high phenyl rotation barriers lies in the close passage of an o-phenyl proton and a methyl (or benzylmethylene) proton in the transition state. BnPh(2)() crystallized from hexane as white needles in the monoclinic system Pn. Unit cell dimensions are as follows: a = 12.198(1) ?, b = 6.1399(6) ?, c = 14.938(2) ?, beta = 107.470(4) degrees, V = 1067.1(2) ?(3), Z = 2. In the crystal molecular structure, the imine bridge CNC bond angle in BnPh(2)() is constrained to a small value (96 degrees ). The benzylic phenyl group is oriented gauche to the nitrogen lone pair.