Insertion of a Single‐Molecule Magnet inside a Ferromagnetic Lattice Based on a 3D Bimetallic Oxalate Network: Towards Molecular Analogues of Permanent Magnets

The insertion of the single‐molecule magnet (SMM) [Mn^III(salen)(H₂O)]₂²⁺ (salen^2?=N,N′‐ethylenebis‐(salicylideneiminate)) into a ferromagnetic bimetallic oxalate network affords the hybrid compound [Mn^III(salen)(H₂O)]₂[Mn^IICr^III(ox)₃]₂ ? (CH₃OH) ? (CH₃CN)₂ ( 1 ). This cationic Mn₂ cluster templates the growth of crystals formed by an unusual achiral 3D oxalate network. The magnetic properties of this hybrid magnet are compared with those of the analogous compounds [Mn^III(salen)(H₂O)]₂[Zn^IICr^III(ox)₃]₂ ? (CH₃OH) ? (CH₃CN)₂ ( 2 ) and [In^III(sal₂‐trien)][Mn^IICr^III(ox)₃] ? (H₂O)_0.25 ? (CH₃OH)_0.25 ? (CH₃CN)_0.25 ( 3 ), which are used as reference compounds. In 2 it has been shown that the magnetic isolation of the Mn₂ clusters provided by their insertion into a paramagnetic oxalate network of Cr^III affords a SMM behavior, albeit with blocking temperatures well below 500 mK even for frequencies as high as 160 kHz. In 3 the onset of ferromagnetism in the bimetallic Mn^IICr^III network is observed at T_c=5 K. Finally, in the hybrid compound 1 the interaction between the two magnetic networks leads to the antiparallel arrangement of their respective magnetizations, that is, to a ferrimagnetic phase. This coupling induces also important changes on the magnetic properties of 1 with respect to those of the reference compounds 2 and 3 . In particular, compound 1 shows a large magnetization hysteresis below 1 K, which is in sharp contrast with the near‐reversible magnetizations that the SMMs and the oxalate ferromagnetic lattice show under the same conditions.     

Efficient Biocatalytic Degradation of Pollutants by Enzyme‐Releasing Self‐Propelled Motors

The first example of a self‐propelled tubular motor that releases an enzyme for the efficient biocatalytic degradation of chemical pollutants is demonstrated. How the motors are self‐propelled by the Marangoni effect, involving simultaneous release of SDS surfactant and the enzyme remediation agent (laccase) in the polluted sample, is illustrated. The movement induces fluid convection and leads to the rapid dispersion of laccase into the contaminated solution and to a dramatically accelerated biocatalytic decontamination process. The greatly improved degradation efficiency, compared to quiescent solutions containing excess levels of the free enzyme, is illustrated for the efficient biocatalytic degradation of phenolic and azo‐type pollutants. The high efficiency of the motor‐based decontamination approach makes it extremely attractive for a wide‐range of remediation processes in the environmental, defense and public health fields.     

Photodynamic Therapy Efficacy Enhanced by Dynamics: The Role of Charge Transfer and Photostability in the Selection of Photosensitizers

Progress in the photodynamic therapy (PDT) of cancer should benefit from a rationale to predict the most efficient of a series of photosensitizers that strongly absorb light in the phototherapeutic window (650–800 nm) and efficiently generate reactive oxygen species (ROS=singlet oxygen and oxygen‐centered radicals). We show that the ratios between the triplet photosensitizer–O₂ interaction rate constant (k_D) and the photosensitizer decomposition rate constant (k_d), k_D/k_d, determine the relative photodynamic activities of photosensitizers against various cancer cells. The same efficacy trend is observed in vivo with DBA/2 mice bearing S91 melanoma tumors. The PDT efficacy intimately depends on the dynamics of photosensitizer–oxygen interactions: charge transfer to molecular oxygen with generation of both singlet oxygen and superoxide ion (high k_D) must be tempered by photostability (low k_d). These properties depend on the oxidation potential of the photosensitizer and are suitably combined in a new fluorinated sulfonamide bacteriochlorin, motivated by the rationale.     

Phosphatidylcholine‐Coated Iron Oxide Nanomicelles for In Vivo Prolonged Circulation Time with an Antibiofouling Protein Corona

We report the synthesis of micellar phosphatidylcholine‐coated superparamagnetic iron oxide nanoparticles as a new long circulation contrast agents for magnetic resonance imaging. Oleic acid‐coated Fe₃O₄ nanoparticles were first prepared through thermal degradation and then encapsulated into small clusters with a phosphatidylcholine coating to obtain hydrophilic nanomicelles. A thorough characterization confirmed the chemical nature of the coating and the excellent colloidal stability of these nanomicelles in aqueous media. Magnetization and relaxivity properties proved their suitability as magnetic resonance imaging (MRI) contrast agent and in vitro cell viability data showed low toxicity. Vascular lifetime and elimination kinetics in the liver were assessed by blood relaxometry and by in vivo MRI in rats and compared with “control” particles prepared with a polyethylene glycol derivative. These micellar particles had a lifetime in blood of more than 10 h, much longer than the control nanoparticles (≈2 h), which is remarkable considering that the coating molecule is a small biocompatible zwitterionic phospholipid. The protein corona was characterized after incubation with rat serum at different times by high‐throughput proteomics, showing a higher proportion of bound apolipoproteins and other dysopsonins for the phosphatidylcholine particles. The antibiofouling properties of this corona and its resistance to the adsorption of proteins corroborate the observed enhanced stability and prolonged systemic circulation.     

Peripherally and Axially Carboxylic Acid Substituted Subphthalocyanines for Dye‐Sensitized Solar Cells

A series of subphthalocyanines (SubPcs) bearing a carboxylic acid group either at the peripheral or axial position have been designed and synthesized to investigate the influence of the COOH group positions on the dye‐sensitized solar cell (DSSC) performance. The DSSC devices based on SubPcs with axially substituted carboxylic acid groups showed low photovoltaic performance, whereas peripherally substituted one exhibited higher power conversion efficiency owing to improved injection from LUMO of SubPcs to the TiO₂ conduction band.     

Fluorescence of New o‐Carborane Compounds with Different Fluorophores: Can it be Tuned?

Two sets of o‐carborane derivatives incorporating fluorene and anthracene fragments as fluorophore groups have been successfully synthesized and characterized, and their photophysical properties studied. The first set, comprising fluorene‐containing carboranes 6 – 9 , was prepared by catalyzed hydrosilylation reactions of ethynylfluorene with appropriate carboranylsilanes. The compound 1‐[(9,9‐dioctyl‐fluorene‐2‐yl)ethynyl]carborane ( 11 ) was synthesized by the reaction of 9,9‐dioctyl‐2‐ethynylfluorene and decaborane (B₁₀H₁₄). Furthermore, reactions of the lithium salt of 11 with 1 equivalent of 4‐(chloromethyl)styrene or 9‐(chloromethyl)anthracene yielded compounds 12 and 13 . Members of the second set of derivatives, comprising anthracene‐containing carboranes, were synthesized by reactions of monolithium or dilithium salts of 1‐Me‐1,2‐C₂B₁₀H₁₁, 1‐Ph‐1,2‐C₂B₁₀H₁₁, and 1,2‐C₂B₁₀H₁₂ with 1 or 2 equivalents of 9‐(chloromethyl)anthracene, respectively, to produce compounds 14 – 16 . In addition, 2 equivalents of the monolithium salts of 1‐Me‐1,2‐C₂B₁₀H₁₁ (Me‐o‐carborane) and 1‐Ph‐1,2‐C₂B₁₀H₁₁ (Ph‐o‐carborane) were reacted with 9,10‐bis(chloromethyl)anthracene to produce compounds 17 and 18 , respectively. Fluorene derivatives 6 – 9 exhibit moderate fluorescence quantum yields (32–44 %), whereas 11 – 13 , in which the fluorophore is bonded to the C_cluster (C_c), show very low emission intensity (6 %) or complete fluorescence quenching. The anthracenyl derivatives containing the Me‐o‐carborane moiety exhibit notably high fluorescence emissions, with ?_F=82 and 94 %, whereas their Ph‐o‐carborane analogues are not fluorescent at all. For these compounds, we have observed a correlation between the C_c?C_c bond length and the fluorescence intensity in CH₂Cl₂ solution, comparable to that observed for previously reported styrene‐containing carboranes. Thus, our hypothesis is that for systems of this type the fluorescence may be tuned and even predicted by changing the substituent on the adjacent C_c.     

Solvent‐Dependent Cation Exchange in Metal–Organic Frameworks

We investigated which factors govern the critical steps of cation exchange in metal–organic frameworks by studying the effect of various solvents on the insertion of Ni²⁺ into MOF‐5 and Co²⁺ into MFU‐4l. After plotting the extent of cation insertion versus different solvent parameters, trends emerge that offer insight into the exchange processes for both systems. This approach establishes a method for understanding critical aspects of cation exchange in different MOFs and other materials.     

Aryl‐Copper(III)‐Acetylides as Key Intermediates in CCsp Model Couplings under Mild Conditions

The mechanism of copper‐mediated Sonogashira couplings (so‐called Stephens–Castro and Miura couplings) is not well understood and lacks clear comprehension. In this work, the reactivity of a well‐defined aryl‐Cu^III species ( 1 ) with p‐R‐phenylacetylenes (R=NO₂, CF₃, H) is reported and it is found that facile reductive elimination from a putative aryl‐Cu^III‐acetylide species occurs at room temperature to afford the C_aryl?C_sp coupling species ( I_R ), which in turn undergo an intramolecular reorganisation to afford final heterocyclic products containing 2H‐isoindole ( P , P , P_Ha ) or 1,2‐dihydroisoquinoline ( P_Hb ) substructures. Density Functional Theory (DFT) studies support the postulated reductive elimination pathway that leads to the formation of C?C_sp bonds and provide the clue to understand the divergent intramolecular reorganisation when p‐H‐phenylacetylene is used. Mechanistic insights and the very mild experimental conditions to effect C_aryl?C_sp coupling in these model systems provide important insights for developing milder copper‐catalysed C_aryl?C_sp coupling reactions with standard substrates in the future.