Accurately solving the electronic Schrodinger equation of small atoms and molecules using explicitly correlated (r12-)MR-CI. VIII. Valence excited states of methylene (CH2)

We compute the adiabatic transition energies of methylene (CH(2)) from the ground state to the lowest electronically excited valence states using the r(12)-MR-ACPF-2 method with a large basis set and an extended reference space. We recall that this method aims at reaching the basis-set and full configuration interaction (CI) limits simultaneously. Our best excitation energies, T(e) (T(0)), are 9.22 (8.87) (a (1)A(1), corrected for relativistic and adiabatic effects), 31.98 (31.86) (b (1)B(1)), and 57.62 (57.18) kcal mol(-1) (c (1)A(1)) (both uncorrected). We are able to reach the respective basis-set limits that closely that the remaining errors of our (uncorrected) calculations are clearly due to the MR-ACPF-2 method. While we are unable to assess the error of the latter method in a systematic way, we still believe that it is rather unlikely that the errors of our excitation energies exceed +/-0.10 kcal mol(-1). We finally observe that our (corrected) a state values deviate by only -0.10 (-0.10) kcal mol(-1) from the results of Csaszar et al. [J. Chem. Phys. 118, 10631 (2003)]--who did careful extrapolations to the valence full-CI and basis-set limits and added a correction for the core correlation--and that the deviation from experiment is only -0.13 (-0.13) kcal mol(-1). From these excellent agreements we conclude that our excitation energies to the b and c states are similarly accurate.     

Investigation of drug-cyclodextrin complexes by a phase-distribution method: some theoretical and practical considerations

The purpose of the study was to evaluate an octanol-water phase distribution method for investigation of drug/cyclodextrin (D/CD) complexes and to compare stability constant values obtained by this method to values obtained by the phase solubility method. A general equation for determination of 1 : 1 D/CD complex stability constant (K1 : 1) from the slope of a phase-distribution diagram (a diagram of the reciprocal of the apparent partition coefficient vs. the total CD concentration) was derived. The equation accounted for the possible inclusion of the organic solvent in the CD cavity and the gradual saturation of the CD binding with increasing concentration of the guest compound. This method was used to determine K1 : 1 for 2-hydroxypropyl-beta-cyclodextrin (HPbetaCD) complexes of hydrocortisone, prednisolone, diazepam, beta-estradiol and diethylstilbestrol. These values were comparable to K1 : 1 values determined by the phase-solubility method. The phase-distribution method could also be applied to determine stability constants for the neutral and ionic forms of the weakly acidic drugs, naproxen and triclosan and the weakly basic drug lidocaine. The phase-distribution method is a very versatile and fast method and has the advantage, compared to the phase-solubility method, that it only requires very small drug samples. Thus, this method would be suitable for screening of new drug candidates.     

Optimization of culture medium and conditions for penicillin acylase production by Streptomyces lavendulae ATCC 13664

The culture medium for Streptomyces lavendulae ATCC 13664 was optimized on a shake-flask scale by using a statistical factorial design for enhanced production of penicillin acylase. This extracellular enzyme recently has been reported to be a penicillin K acylase, presenting also high hydrolytic activity against penicillin V and other natural aliphatic penicillins such as penicillin K, penicillin F, and penicillin dihydroF. The factorial design indicated that the main factors that positively affect penicillin acylase production by S. lavendulae were the concentration of yeast extract and the presence of oligoelements in the fermentation medium, whereas the presence of olive oil in the medium had no effect on enzyme production. An initial concentration of 2.5% (w/v) yeast extract and 3 microg/mL of CuSO4 x 5H2O was found to be best for acylase production. In such optimized culture medium, fermentation of the microorganism yielded 289 IU/L of enzyme in 72 h when employing a volume medium/volume flask ratio of 0.4 and a 300-rpm shaking speed. The presence of copper, alone and in combination with other metals, stimulated biomass as well as penicillin acylase production. The time course of penicillin acylase production was also studied in the optimized medium and conditions. Enzyme production showed catabolite repression by different carbon sources such as glucose, lactose, citrate, glycerol, and glycine.     

A comparative study of several HPLC methods for determining free amino acid profiles in honey

A study of the viability of three derivatizing reagents for obtaining amino acid profiles in honey through high performance liquid chromatography (HPLC) is presented. A method using diode array detection based on a reaction with diethyl ethoxymethylene malonate (DEMM) and two other methods using fluorescence detection based on derivatization with fluorenylmethyl chloroformate (FMOC-Cl) and 6-aminoquinolyl-N-hydroxysuccinimidyl carbamate (AQC) have been developed. The three methods yield detection limits close to the ppb level, but vary in relation to other analytical characteristics. The use of methyl chloroformate derivatives allows the profile to be obtained with the greatest sensitivity within a short time frame. On applying such methods to honey samples of diverse botanical origin, we observe that the proline values obtained are always lower than those found using the official spectrophotometric method, thereby underlining the advisability of using HPLC methods to reduce uncertainty in these results.     

RP-HPLC analysis of phenolic compounds and flavonoids in beverages and plant extracts using a CoulArray detector

Methods were developed for the analysis of natural antioxidants including phenolic compounds and flavonoids in beverages and plant extracts using gradient HPLC with multi-channel electrochemical coulometric detection. Suitability of various reversed-phase columns for this purpose was compared; pH and mobile phase gradients were optimized with respect to the separation selectivity and sensitivity of detection. Because of different target compounds in various sample types, the overlapping resolution maps and the normalized resolution product approaches described earlier were used to select optimum columns and gradients to suit the analysis of the individual sample types. The methods were applied to the analysis of phenolic compounds and flavonoids in beer, wine, tea, and yacon extracts. 32 phenolic compounds were identified and determined, including derivatives of benzoic and cinnamic acids, flavones, and a few related glycosides. Eight-channel CoulArray detection offers high selectivity and sensitivity with limits of detection in the low microg L(-1) range, at least an order of magnitude lower than single-channel coulometric detection using the Coulochem detector. No special sample pretreatment is necessary and, because of the compatibility of the CoulArray detector with gradient elution, phenolic antioxidants of different polarities can be determined in a single run. In addition to the retention times, the ratios of the areas of the pre-dominant and post-dominant peaks to the area of the dominant peak can be used for improved identification of natural antioxidants.     

Unexpected valence bond isomerization of [1,2,4]triazolo[3,4-c][1,2,4]benzotriazines under flash vacuum pyrolytic (fvp) conditions

Flash vacuum pyrolysis (fvp) of some substituted [1,2,4]triazolo[3,4-c][1,2,4]benzotriazine derivatives (1a-d) has been studied between 450 and 600 °C. The only transformation observed up to 525 °C was the unexpected valence bond isomerization of the angularly fused starting compounds to the isomeric linearly fused [1,2,4]triazolo[4,3-b][1,2,4]benzotriazine derivatives (9a-d), whereas at higher temperatures fragmentation products such as aromatic nitriles were also formed. Kinetic measurements revealed negative entropies of activation in the isomerization process, which suggest a concerted ring closure reaction to an intermediate antiaromatic diazirine. Reversibiblity of the title isomerization reaction was also proved by FVP experiments.     

Electrochemical Synthesis and Characterization of Nickel(II) Complexes with N‐2‐Pyridyl‐sulfonamide Ligands

Heteroleptic nickel(II) complexes [NiL₂L′] of a series of monoanionic and potentially bidentate N‐2‐pyridyl‐sulfonamide ligands [HL] and 2,2′‐bipyridine or 1,10‐Phenanthroline (L′) have been prepared by electrochemical oxidation of a nickel anode in an acetonitrile solution of the ligands. The complexes have been characterized by microanalysis, IR and electronic spectroscopy, magnetic measurements and LSI mass spectrometry. The crystal structure of [Ni(Ms6mepy)₂(bipy)] has been determined by x‐ray diffraction and shows the metal in an octahedral NiN₆ environment. Octahedral structures are also proposed for the other complexes with the N‐2‐pyridyl‐sulfonamide ligands acting as N,N′ or N, O bidentate systems, depending on the position of the methyl substituent on the pyridine ring.     

Study of Sb‐doped SnO2 Gray Ceramic Pigment with Cassiterite Structure

In this study, Sb_xSn_1?xO₂ (0 ≤ x ≤ 0.5) compositions were synthesized by the ceramic method from Sb₂O₃‐SnO₂ and Sb₂O₅‐SnO₂ mixtures and characterized by Differential thermal analysis (DTA) and thermogravimetric analysis (TG), X‐ray diffraction, UV‐V‐NIR spectroscopy and CIE L*a*b* (Commission Internationale de l'Eclairage L*a*b*) parameters measurements. Solid solutions with cassiterite structure were obtained at 1300 °C. These solid solutions are stable into glazes. From Sb₂O₃, light gray coloured materials were obtained. From Sb₂O₅, bluish gray coloured materials were obtained at 1300 °C/6h when x ≥ 0.3. Sb_xSn_1?xO₂ with 0.3 ≤ x < 0.5, T = 1300 °C and Sb₂O₅ might be established as compositional range, fired temperature and antimony precursor to obtain gray ceramic pigments in this system.     

Alkenyl selenols and selenocyanates: synthesis, spectroscopic characterization by photoelectron spectroscopy, and quantum chemical study

Vinyl, allyl, and homoallyl selenols were easily prepared by a chemoselective reduction of the corresponding selenocyanates with aluminum hydrides. Two stable vinyl and five stable allyl conformers of both series were predicted on the potential-energy surface. The interaction of SeH or SeCN groups with the vinyl group has been investigated with UV photoelectron spectroscopy and quantum chemical calculations, using the MP2/cc-pVTZ and B3LYP/cc-pVTZ levels. In the vinyl derivatives, a surprisingly strong direct conjugation of the selenium lone electron pair and the C=C double bond was observed. On the other hand, in allyl position the selenium lone pair is independent on the C=C double bond, and the hyperconjugation between the Se-C bond and the double bond is the ruling effect. Thus is clarified the type and extent of the interaction between the SeH or SeCN group and the unsaturated moiety.