Electrical conductivity of the system Y2O3CeO2

The electrical conductivity of the system Y₂O₃CeO₂ was measured in the temperature range 500–1100°C and P_o2 range 10^–7?10^?1 atm. Possible defect models were suggested on the basis of conductivity data, which were investigated as a function of temperature and of P_o2. The observed activation energies were 0.40 eV and 1.79 eV in the low- and high-temperature regions, respectively. The observed conductivity dependences on P_o2 were in the temperature range 500–750°C and at temperatures from 750–1100°C. It is suggested that the system Y₂O₃CeO₂ shows a mixed ionic plus hole conduction due to an O^″_i defect and an electronic hole conduction due to a V^'''_Y defect in the low- and high-temperature regions, respectively.     

Progressive formation of fine and coarse ripples on SiC surface by repeated irradiation of femtosecond laser pulses

In this work, we report the progressive formation of first nanoparticles, next fine ripples, and eventually coarse ripples during the irradiation of single-crystal 6H-SiC surfaces with increasing number of femtosecond laser pulses (λ = 515 nm, τ = 250 fs, repetition rate = 100 kHz). At laser fluences greater than the single-pulse ablation threshold, nanoparticles were produced on the surface by the first few pulses over which fine ripple patterns overlapped at increased pulse numbers. As the pulse number was further increased over ten, the surface was gradually transformed into a coarse ripple–covered one. At laser fluence below the threshold, however, only fine ripples were formed nonuniformly.     

Machine learning identification of symmetrized base states of Rydberg atoms

Studying the complex quantum dynamics of interacting many-body systems is one of the most challenging areas in modern physics. Here, we use machine learning (ML) models to identify the symmetrized base states of interacting Rydberg atoms of various atom numbers (up to six) and geometric configurations. To obtain the data set for training the ML classifiers, we generate Rydberg excitation probability profiles that simulate experimental data by utilizing Lindblad equations that incorporate laser intensities and phase noise. Then, we classify the data sets using support vector machines (SVMs) and random forest classifiers (RFCs). With these ML models, we achieve high accuracy of up to 100% for data sets containing only a few hundred samples, especially for the closed atom configurations such as the pentagonal (five atoms) and hexagonal (six atoms) systems. The results demonstrate that computationally cost-effective ML models can be used in the identification of Rydberg atom configurations.     

Sputter-deposited ZnO thin films consisting of nano-networks for binder-free dye-sensitized solar cells

ZnO nano-network structures with high porosity were prepared for use in the photoelectrodes of binder-free dye-sensitized solar cells (DSSCs) by DC sputtering and subsequent thermal oxidation. Zn thin films prepared at 100 °C showed nano-network structures with high porosity, while those prepared at 25 °C did not. This was partially attributed to the high mobility of sputter-deposited particles that arrived at the surface of the substrate and partially to a supersaturation mechanism. The prepared nano-network Zn was successfully transformed to ZnO without a morphological change via subsequent annealing in air. The power conversion efficiency of DSSCs based on the ZnO nano-network structures exhibited 10 times higher efficiency than those based on ZnO film prepared at 25 °C because of its large surface area for adsorption of dye molecules. The thickness of the ZnO nano-network structures increased linearly at 10 μm h^?1 as a function of sputter time. As the film thickness increased, the power conversion efficiency of DSSCs increased from 1.09% to 1.82%.     

Coherent manipulation of electronic States in a double quantum dot

We investigate coherent time evolution of charge states (pseudospin qubit) in a semiconductor double quantum dot. This fully tunable qubit is manipulated with a high-speed voltage pulse that controls the energy and decoherence of the system. Coherent oscillations of the qubit are observed for several combinations of many-body ground and excited states of the quantum dots. Possible decoherence mechanisms in the present device are also discussed.     

Effect of Ni doping on the phase stability and conductivity of scandia-stabilized zirconia

The effect of Ni doping on the phase stability and conductivity of scandia-stabilized zirconia (SSZ) thick film was studied. A free-standing 10SSZ thick-film (10 mol% Sc₂O₃-stabilized zirconia, ~ 10 μm thick) that was previously in contact with a Ni layer during co-firing was fabricated. The 10SSZ thick-film showed a cubic phase in contrast to the rhombohedral phase shown for a bulk 10SSZ sample. The Ni content in the SSZ thick film was ~ 1.7 mol%. The effect of Ni on the cubic phase formation was also confirmed by the similar observation of the cubic phase in the Ni-doped bulk 10SSZ sample. The observed conductivity behavior also supported the XRD observation. Ni was found to hinder the transformation of the cubic phase to the rhombohedral on cooling in 10SSZ samples after a reduction treatment.     

An old conjecture of Erdos-Turán on additive bases

There is a 1941 conjecture of Erdos and Turán on what is now called additive basis that we restate:

Conjecture 0.1(Erdos and Turán). Suppose that is an increasing sequence of integers and

Suppose that

If 0$"> for all , then is unbounded.

Our main purpose is to show that the sequence cannot be bounded by . There is a surprisingly simple, though computationally very intensive, algorithm that establishes this.

     

Pressure-tunable guided-mode resonance sensor for single-wavelength characterization

A method of tuning a one-dimensional guided-mode resonance grating through the use of an air-pressure-responsive membrane is demonstrated here using finite-element method simulation. The device consists of a titanium dioxide (TiO(2)) grating structure embedded in a flexible polydimethylsiloxane membrane. This grating has a resonant response to TM-polarized light at a wavelength dependent upon the refractive index of the surrounding medium. By varying the pressure by 5500 Pa, lateral strain may be applied to the grating; this allows resonances to be produced for medium refractive indices ranging from 1.33 to 1.50 for a fixed-wavelength 850 nm light source.     

In-Solution Derivatization and Headspace Gas Chromatography–Mass Spectrometry for 56 Carbonyl Compounds in Tobacco Heating Products,Traditional Tobacco Products and Flavoring Capsules

Chromatographia - Optimal derivatization conditions were established for the simultaneous determination of 12 aliphatic saturated aldehydes, 8 aliphatic saturated ketones, 4 cyclic ketones, 3...     

Structure–property relationship in PCL/starch blend compatibilized with starch‐g‐PCL copolymer

The polycaprolactone (PCL)/starch blends were prepared by using the starch‐g‐PCL (SGCL) graft copolymers as compatibilizers, and their mechanical properties were correlated with the compatibilizing effect of the SGCL copolymers having various molecular structures. The modulus and strength of the PCL/starch blend were decreased, whereas the percent elongation and the toughness were increased remarkably with the addition of SGCL having appropriate graft structure. These property changes were analyzed in terms of the PCL crystallinity and the interfacial adhesion between the PCL matrix and starch dispersion phases, which were dominated by the compatibilizing effects of the SGCL copolymers. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 2430–2438, 1999