Enhancing the organic dye adsorption on porous xerogels

We investigate the adsorption of four different organic dyes (i.e., methyl orange, alizarin red S, brilliant blue FCF, and phenol red) on porous xerogels. To understand the factors affecting the adsorption capacity of the xerogels, we vary the hydrophobicity and the textural properties of the xerogels as well as the solution pH. We control the hydrophobicity by mixing two different precursors (i.e., vinyltriethoxysilane (VTES) and tetraethoxysilane (TEOS)) and the textural properties by using cetyltrimethylammonium bromide (CTAB) as a templating agent. We find that the adsorption capacity is enhanced as the organic/inorganic hybrid xerogel or the templated xerogel is used instead of the purely inorganic or the untemplated xerogel. In all the cases studied, adsorption decreases as the pH is increased due to the electrostatic repulsion between the dyes and the xerogel surface. We find that both the hydrophobic surface and larger pore size/volume are required to enhance the adsorption capacity significantly.     

Bioconversion of cellulose into ethanol by nonisothermal simultaneous saccharification and fermentation

The kinetic characteristics of cellulase and beta-glucosidase during hydrolysis were determined. The kinetic parameters were found to reproduce experimental data satisfactorily and could be used in a simultaneous saccharification and fermentation (SSF) system by coupling with a fermentation model. The effects of temperature on yeast growth and ethanol production were investigated in batch cultures. In the range of 35-45 degrees C, using a mathematical model and a computer simulation package, the kinetic parameters at each temperature were estimated. The appropriate forms of the model equation for the SSF considering the effects of temperature were developed, and the temperature profile for maximizing the ethanol production was also obtained. Briefly, the optimum temperature profile began at a low temperature of 35 degrees C, which allows the propagation of cells. Up to 10 h, the operating temperature increased rapidly to 39 degrees C, and then decreased slowly to 36 degrees C. In this nonisothermal SSF system with the above temperature profile, a maximum ethanol production of 14.87 g/L was obtained.     

Supramolecular conducting microfibers from amphiphilic tetrathiafulvalene-based organogelator

An amphiphilic tetrathiafulvalene molecule can gelate a variety of organic solvents in view of multiple intermolecular interactions, especially in polar solvent with the formation of highly-ordered columnar structures. The formation of mixed-valence states shows the semiconductive behaviors with the conductivity of 10^-4 S/cm, as promising candidates for organic electronics.     

Chiral attachment of styrene mediated by surface dimers on Ge100

We have investigated the chiral adsorption configurations of styrene on Ge(100) using scanning tunneling microscopy at 300 K. The chemisorbed styrene on a single Ge dimer reduces the symmetry of the molecule, which produces a chiral center, and leads to the (S) or (R) chiral on-top configuration. We have found that the dimeric adsorption of styrene induced by the Ge surface dimer structure forms the enantiomeric and diastereomeric paired end-bridge configurations. We determine the absolute chirality of adsorbed styrene on Ge(100) and demonstrate a novel method for the achiral molecule to produce dimeric enantiomers and diastereomers attached to the semiconductor surface.     

Tributyl phosphate degradation by immobilized cells of aCitrobacter sp.

Tributyl phosphate (TBP), a plasticizer and solvent, is used in nuclear fuel reprocessing, generating TBP wastes laden with residual uranium. ACitrobacter sp. accumulated heavy metals via a phosphohydrolase(s) that precipitated metals with inorganic phosphate liberated from an organic phosphate “donor” molecule (TBP). Mutant analysis suggested that TBP hydrolysis was not attributable to a previously documented acid phosphatase (monoesterase). Purified monoesterase had little activity against phospho di- and triesters, had no requirement for Mg²⁺ or Mn²⁺, and was EDTA-resistant. Conversely, TBP cleavage by immobilized cells was enhanced by Mg²⁺, and ininhibited by Mn²⁺ and EDTA. A separate phosphotri/diesterase was implicated.     

Electrochemical and Electrochromic Properties of Ni Oxide Thin Films Prepared by a Sol–Gel Method

Nickel oxide thin films, which are well known anodic coloration materials that are used in electrochromic devices, were prepared by a sol–gel method, and their electrochemical and electrochromic properties were investigated. The sol was prepared from Ni(OH)₂ powder with an average size of 7 nm, in a mixture of ethylene glycol and absolute ethanol. The films were coated on an ITO substrate using the powder, dispersed in the solution. When additive materials, acetyl acetone and glycerol, were added to the sol its hardness and adhesion properties were improved. The optimized thin film formed an amorphous, porous structure, and showed a large current density during continuous potential and pulse potential cycling. The film also was transparent and had a high coloration efficiency (33.5 cm²/C) and a rapid response time (1.0–2.5 s) during the coloring/bleaching process.     

Covalent crosslinking of 1-D photonic crystals of microporous Si by hydrosilylation and ring-opening metathesis polymerization

Free-standing porous Si multilayer dielectric mirrors, prepared by electrochemical etching of crystalline Si, are treated with a ruthenium ring-opening metathesis polymerization (ROMP) catalyst followed by norbornene to produce flexible, stable composite materials in which poly(norbornene) is covalently attached to the porous Si matrix.     

A new and convenient synthesis of N-substituted perhydroazepines from adipaldehyde and primary amines with tetracarbonylhydridoferrate,HFe(CO), as a selective reducing agent

Ethanolic tetracarbonylhydridoferrate combined with adipaldehyde is very efficient for the selective transformation of an amino group into perhydroazepine. A large variety of both aliphatic and aromatic amines react with adipaldehyde in the presence of tetracarbonylhydridoferrate at room temperature and carbon monoxide to give the corresponding N-alkyl- and N-arylperhydroazepines in good to excellent yields.     

Copolymerization of ethylene and 1-butene with highly active Ticl4/THF/Mgcl2, Ticl4/THF/Mgcl2/SiO2, and TiCl3.1/3AlCl3 catalysts

Highly active catalysts for copolymerization have been prepared by the precipitation of MgCl₂/ToCl₄ complex with or without high surface area silica. Copolymerization of ethylene and 1-butene has been tested by using the prepared catalysts at various concentrations of 1-butene. The catalytic activities are 20–80 kg/g Ti h. The rate of copolymerization is strongly affected by the addition of 1-butene. The decay rate of copolymerization is first order with respect to time. Analyses of copolymers with solvent extraction, DSC, IR, XRD, and NMR were performed. Ethylene reactivity ratio (k₁₁) for TiCl₄/MgCl₂/THF catalyst is calculated to be about 26 by NMR spectrum. © 1994 John Wiley & Sons, Inc.     

Surface-initiated growth of poly d(A-T) by Taq DNA polymerase

In this paper, we report surface-initiated d(A-T) polymerization by Taq DNA polymerase as a method for constructing DNA-tethered surfaces using an enzyme. The enzymatic polymerization was conducted successfully via two steps: tethering of oligo d(A-T)s onto the surface presenting carboxylic acids by amide coupling and surface-initiated polymerization using Taq DNA polymerase. In this enzymatic polymerization process, the design and construction of carboxylic acid-presenting surfaces were found to be an important factor: DNA growth did not occur on the gold surface coated only with the self-assembled monolayer (SAM) of 16-mercaptohexadecanoic acid (MHDA), but effectively proceeded on the surfaces presenting mixed SAMs of MHDA and 1-pentadecanethiol. The coupling of oligo d(A-T)s and the subsequent DNA polymerization reaction were characterized by polarized infrared external reflectance spectroscopy, ellipsometry, X-ray photoelectron spectroscopy, and atomic force microscopy.