A chiral cyclohexanone linked to polystyrene for solid-phase synthesis of chiral alpha-carbonyls

Two chiral cyclohexanones were linked to polystyrene resin. The polymer-bound auxiliaries were subjected to a sequence of four reactions, the last of which cleaves the desired alpha-chiral carbonyl compound off the resin, concurrently regenerating the resin-bound auxiliary in its original form. The resin can then be reused.     

Combined first-principles computational and experimental multinuclear solid-state NMR investigation of amino acids

13C, 14N, 15N, 17O, and 35Cl NMR parameters, including chemical shift tensors and quadrupolar tensors for 14N, 17O, and 35Cl, are calculated for the crystalline forms of various amino acids under periodic boundary conditions and complemented by experiment where necessary. The 13C shift tensors and 14N electric field gradient (EFG) tensors are in excellent agreement with experiment. Similarly, static 17O NMR spectra could be precisely simulated using the calculation of the full chemical shift (CS) tensors and their relative orientation with the EFG tensors. This study allows correlations to be found between hydrogen bonding in the crystal structures and the 17O NMR shielding parameters and the 35Cl quadrupolar parameters, respectively. Calculations using the two experimental structures for L-alanine have shown that, while the calculated isotropic chemical shift values of 13C and 15N are relatively insensitive to small differences in the experimental structure, the 17O shift is markedly affected.     

Reversible storage of molecular hydrogen by sorption into multilayered TiO2 nanotubes

The sorption of hydrogen between the layers of the multilayered wall of nanotubular TiO2 was studied in the temperature range of -195 to 200 degrees C and at pressures of 0 to 6 bar. Hydrogen can intercalate between layers in the walls of TiO2 nanotubes forming host-guest compounds TiO2 x xH2, where x < or = 1.5 and decreases at higher temperatures. The rate of hydrogen incorporation increases with temperature and the characteristic time for hydrogen sorption in TiO2 nanotubes is several hours at 100 degrees C. The rate of intercalate formation is limited by the diffusion of molecular hydrogen inside the multilayered walls of the TiO2 nanotube. 1H NMR-MAS and XRD data confirm the incorporation of hydrogen between the layers in the walls of TiO2 nanotubes. The nature and possible applications of the observed intercalates are considered.     

Charge recombination fluorescence in photosystem I reaction centers from Chlamydomonas reinhardtii

The fluorescence kinetics of photosystem I core particles from Chlamydomonas reinhardtii have been measured with picosecond resolution in order to test a previous hypothesis suggesting a charge recombination mechanism for the early electron-transfer steps and the fluorescence kinetics (Müller et al. Biophys. J. 2003, 85, 3899-3922). Performing global target analyses for various kinetic models on the original fluorescence data confirms the "charge recombination" model as the only acceptable one of the models tested while all of the other models can be excluded. The analysis allowed a precise determination of (i) the effective charge separation rate constant from the equilibrated reaction center excited state (438 ns(-1)) confirming our previous assignment based on transient absorption data (Müller et al. Biophys. J. 2003, 85, 3899-3922), (ii) the effective charge recombination rate constant back to the excited state (52 ns(-1)), and (iii) the intrinsic secondary electron-transfer rate constant (80 ns(-1)). The average energy equilibration lifetime core antenna/RC is about 1 ps in the "charge recombination" model, in agreement with previous transient absorption data, vs the 18-20 ps energy transfer lifetime from antenna to RC within "transfer-to-the-trap-limited" models. The apparent charge separation lifetime in the recombination model is about three times faster than in the "transfer-to-the-trap-limited" model. We conclude that the charge separation kinetics is trap-limited in PS I cores devoid of red antenna states such as in C. reinhardtii.     

Coexistence of multiple conformations in cysteamine monolayers on Au(111)

The structural organization, catalytic function, and electronic properties of cysteamine monolayers on Au(111) have been addressed comprehensively by voltammetry, in situ scanning tunneling microscopy (STM) in anaerobic environment, and a priori molecular dynamics (MD) simulation and STM image simulation. Two sets of voltammetric signals are observed. One peak at -(0.65-0.70) V (SCE) is caused by reductive desorption of cysteamine. The other signal, at -(0.25-0.40) V consists of a peak doublet. The pH dependence of the latter suggests that the origin is catalytic dihydrogen evolution. The doublet feature is indicative of two distinct cysteamine configurations. Cysteamine monolayer formation from initial nucleation to a highly ordered phase has been successfully observed in real time using oxygen-free in situ STM. Random cellular patterns, disordered adlayer formation accompanied by high step edge mobility, and ultimately a highly ordered (square root 3 x 4) R30 degrees lattice are observed sequentially. Pits are formed due to enclosure of the mobile edges during the adsorption process. In the highly ordered cysteamine layer, each unit has two spots with apparent 0.6 A height difference in STM images. The coverage 5.7 +/- 0.1 x 10(-10) mol cm(-2) determined by voltammetry supports that the spots represent two individual cysteamine molecules. A priori MD and density functional simulations hold other clues to the image interpretation and indicate that the NH(3)(+) groups dominate the tunneling contrast. A wide range of interface structures, showing variations in the sulfur binding site and orientation, gauche and trans conformers, and especially hydrogen-bonding interactions, are examined, from which it is concluded that the adsorbate structure is controlled by interactions with the solvent rather than with the substrate.     

Investigating the interaction of crystal violet probe molecules on sodium dodecyl sulfate micelles with hyper-Rayleigh scattering

We report the use of the nonlinear optical technique of hyper-Rayleigh scattering to investigate the interaction of the cationic probe molecule crystal violet with micelles of sodium dodecyl sulfate. An absolute value of (847 +/- 80) x 10(-30) esu is measured at the fundamental wavelength of 870 nm for the molecular hyperpolarizability of crystal violet free in pure aqueous solutions. In aqueous solutions of sodium dodecyl sulfate, above and below the critical micelle concentration, the measured hyperpolarizability of crystal violet is weaker than in the solution free of sodium dodecyl sulfate. From the comparison with linear optical photoabsorption spectroscopy data, this difference is attributed to electrostatic interactions between the cationic crystal violet molecules and the negatively charged sodium dodecyl sulfate surfactant molecules present in excess. Polarization resolved hyper-Rayleigh scattering measurements are then performed to show that, below and above the critical micelle concentration, crystal violet molecules also undergo symmetry changes upon interaction with sodium dodecyl sulfate. Above the critical micelle concentration, the minimum fraction of micelles interacting with at least one CV molecule is estimated. For instance, for a crystal violet aqueous concentration of 150 microM, this fraction is larger than 7%.     

Determination of binding constants and stoichiometries for platinum anticancer drugs and serum transport proteins by capillary electrophoresis using the Hummel-Dreyer method

A CE method has been developed to evidence and quantitatively characterize the interaction between platinum-based antitumor drugs and human serum proteins. This method is a variant of affinity CE modified regarding both experimental setup and data treatment so as to measure the peaks (or vacancies) that correspond to the bound drug when it slowly binds to the protein. Using the formalism of the Hummel-Dreyer method and cisplatin and oxaliplatin as test compounds, a protocol for determining albumin and transferrin binding constants and stoichiometries, including (and distinguished by) 48 hours of incubation of the reaction mixture, was elaborated. Relative affinities of drugs toward different proteins in aqueous solution at physiological pH, chloride concentration, and temperature were compared in terms of overall binding constants and numbers of drug molecules attached to the protein. The results indicate that both platinum drugs bind to albumin more strongly than to transferrin, supporting the concept that the albumin fraction is a major drug supply route for chemotherapeutical needs. From a comparison with the binding parameters measured previously for cisplatin by other methods, conclusions were drawn about the validity of CE as a simple and convenient method for assaying protein-drug reactions with slow kinetics.     

Bis(trimethylsilyl)diazene revisited. Density functional theory (DFT) calculations of nitrogen NMR parameters of some azo‐compounds

Calculations of nitrogen NMR parameters [chemical shifts δN and indirect nuclear spin–spin coupling constants J(N,N), J(N,¹³C), J(²⁹Si,N)] of noncyclic azo‐compounds R¹ NN R² (R¹, R² = H, Me, Ph, SiH₃, SiMe₃) and cyclic azo‐compounds [NNCH₂, NN(CH₂)₃ NN(CH₂)₂SiH₂, and NN(SiH₂CH₂SiH₂)] by density functional theory (DFT) methods [B3LYP/6‐311+G(d,p) level of theory] provide data in reasonable agreement with experimental values. The influence of cis‐ and trans‐geometry is reflected by the calculations, and amino‐nitrenes are also included for comparison. The spin–spin coupling constants are analyzed with respect to contact (Fermi contact term, FC) and non‐ contact contributions (paramagnetic and diamagnetic spin‐orbital terms, PSO and DSO, and spin‐dipole term, SD). Bis(trimethylsilyl)diazene 6a can be generated by an alternative method, using the reaction of bis(trimethylsilyl)sulfur diimide with bis‐ (trimethylsilyl)amino‐trimethylsilylimino‐phosphane. © 2005 Wiley Periodicals, Inc. Heteroatom Chem 16:84–91, 2005; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/hc.20075     

Evolution and Operating Experiences with Different Drop‐On‐Demand Systems

Summary: We describe the development of different drop‐on‐demand systems particularly for applications for the liquid handling of biopolymers. Different designs of drop‐on‐demand systems developed by the authors are described. Experiments with these systems show the applicability for pipetting different liquids with different properties. Commercially available systems are also tested. A comparison of the different approaches leads to a discussion of the best fields of application of the different approaches or, alternatively, to the potential further development of the drop‐on‐demand technologies.

Principle setup of the print heads.