CdSe and CdSe/CdS nanorod solids

We demonstrate the self-organization of CdSe nanorods into nematic, smectic, and crystalline solids. Layered colloidal crystals of CdSe nanorods grow by slow destabilization of a nanocrystal solution upon allowing the diffusion of a nonsolvent into the colloidal solution of nanocrystals. The colloidal crystals of nanorods show characteristic birefringence, which we assign to specific spherulite-like texture of each nanorod assembly. To demonstrate the general character of nanorod self-assembly technique, CdSe/CdS heterostructure nanorods were organized into highly luminescent superlattices.     

Covalent attachment of a nickel nitrilotriacetic acid group to a germanium attenuated total reflectance element

The surface of a germanium internal reflectance element (IRE) was modified to bind 6X-histidine (his)-tagged biomolecules. The step-by-step surface modification was monitored via single-pass attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FT-IR). Initially an adlayer of 7-octenyltrimethoxysilane (7-OTMS) was formed on the Ge crystal through the surface hydroxyl groups, which were produced via ozonolysis of the Ge surface. The vinyl moiety of 7-OTMS was oxidized to a carboxylic acid, which was activated by 1,1'-carbonydiimidazole (CDI) to produce a labile imidazole. The labile imidazole that resulted from the CDI coupling was then displaced by the primary amine of nitrilotriacetic acid (NTA). Nickel sulfate was added to the system, and it coordinated with the three carbonyl groups and the nitrogen on NTA, thus leaving the ability of Ni to coordinate with two adjacent histidine residues. Binding of his-tagged biotin to nickel nitrilotriacetic acid (Ni-NTA) was observed by ATR-FT-IR spectroscopy. The surface modification method presented in this paper had minimal nonspecific binding, the Ni-NTA surface was reusable if stored properly, and complete removal of the organic surface was achievable.     

Infrared studies of chromones—II Isotopically substituted 5-hydroxychromones

By deuteration of the OH group, it has been shown that two bands, at 1665 and 1630 cm⁻¹ (CCl₄), in the IR spectra of 5-hydroxychromones are associated with the H-bonded CO stretching vibration. Nuclear deuteration of 5-hydroxy-2-methylchromone (1) under acidic conditions gave a tri- and a hexadeutero derivative; the latter, isotopically substituted at C-3, shows a single CO band at 1649 cm⁻¹. Hydrolysis of 3-acetyl-5-hydroxy-2-methylchromone with sodium carbonate in deuterium oxide furnished 5-hydroxy-2-trideuteromethylchromone-3-d which also exhibits a single CO absorption. Partial incorporation of O¹⁸ into the CO group of 1 results in a single ν_C=O¹⁸ at 1593 cm⁻¹. It is suggested that the doublet CO absorption of 5-hydroxychromones arises from a Fermi resonance involving a low-energy vibrational mode of the vinyl proton on the nuclear C-3 position.     

Reaction of triphenylphosphine with phenylethanethiolate-protected Au38 nanoparticles

The replacement of phenylethanethiolate (SC2Ph) ligands on 1.1 nm (core diameter) Au38(SC2Ph)24 monolayer-protected clusters (MPCs) with varied amounts of triphenylphosphine (PPh3) is investigated in methylene chloride. UV-vis spectra suggest that changes in the MPC Au core size occur when large amounts (> 10 equiv moles per cluster) of PPh3 are reacted with Au38(SC2Ph)24. 1H and 31P NMR spectra following the addition of smaller amounts (< 5 equiv moles) of PPh3 indicate that the reaction liberates a AuISC2Ph complex, as opposed to a SC2Ph thiol, disulfide, or anion. A 1H NMR kinetic study shows that the exchange is surprisingly rapid, even faster than exchanges of thiolates with other thiolates, at room temperature and in air. The reaction is slowed when cooled or conducted under Ar. The difference in potentials of the initial one-electron voltammetric reduction and oxidation of Au38(SC2Ph)24 decreases slightly upon reaction with small amounts of PPh3.     

Multiple isotope effect study of the acid-catalyzed hydrolysis of methyl formate

Multiple isotope effects have been measured for the acid-catalyzed hydrolysis of methyl formate in 0.5 M HCl at 20 degrees C. The isotope effects in the present investigation include the carbonyl carbon (13k = 1.028 +/- 0.001), the carbonyl oxygen (18k = 0.9945 +/- 0.0009), the nucleophile oxygen (18k = 0.995 +/- 0.001), and the formyl hydrogen ((D)k = 0.81 +/- 0.02). Determination of the carbonyl carbon, carbonyl oxygen, and formyl hydrogen isotope effects was performed via isotopic analysis of residual substrate. However, determination of the oxygen nucleophile isotope effect required analysis of the oxygen atoms of the product (formic acid), which exchange with the solvent (water) under acid conditions. This necessitated measurement of the rate of exchange of these oxygen atoms under the conditions for hydrolysis (k(ex) = 0.0723 min(-1)) and correction of the raw isotope ratios measured during the nucleophile-O isotope effect experiment. These results, along with the previously reported isotope effect for the leaving oxygen (18k = 1.0009) and the ratio of the rate of hydrolysis to that of exchange of the carbonyl oxygen with water (k(h)/k(ex) = 11.3), give a detailed picture of the transition-state structure for the reaction.     

Steric interactions mediated by multiblock polymers and biopolymers: role of block size and addition of hydrophilic side chains

To a first approximation, the primary structure of many food proteins maybe thought of as a sequence of short hydrophobic and hydrophilic blocks. The influence of this type of structure on the steric-stabilising properties of such proteins has been considered here. In line with previous studies, using Self-Consistent-Field calculations, it has been shown that the presence of such protein molecules can lead to attraction and consequently bridging flocculation of colloidal particles. In the low adsorption energy limit for the hydrophobic groups (−1k_BT), it is found that the steric potential is significantly influenced by the changes in the number of adsorbed segments, as two surfaces are brought together. This is in contrast to the well-known results in the literature for the high adsorption limiting cases, where the number of such segments remains constant. In particular, the changes in the number of adsorbed hydrophobic units are observed not to be a monotonic function of the separation distance, but increase or decrease in reasonable accord with the oscillatory nature of the steric interactions, observed for various block sizes. Effects of the addition of a moderately sized hydrophilic side chain to the above molecules have also been studied. It is found that, in principle, such a modification can lead to a purely repulsive steric potential in solutions of these hybrid biopolymers. At the hydrophilic side chain sizes considered here, the surface affinity of the molecules is observed not to be drastically different compared to those of unmodified proteins.     

Photoinduced axial ligation and deligation dynamics of nonplanar nickel dodecaarylporphyrins

The ground- and excited-state metal-ligand dynamics of nonplanar nickel(II) 2,3,5,7,8,10,12,13,15,17,18,20-dodecaphenylporphyrin (NiDPP) and two fluorinated analogues (NiF(20)DPP and NiF(28)DPP) have been investigated using static and time-resolved absorption spectroscopy in toluene and in ligating media that differ in basicity, aromaticity, and steric encumbrance. Because of the electronic and steric consequences of nonplanarity, NiDPP does not bind axial ligands in the ground state, but metal coordination does occur after photoexcitation with multistep dynamics that depend on the properties of the ligand. Following the structural relaxations that occur in all nickel porphyrins within approximately 10 ps, ligand binding to photoexcited NiDPP is progressively longer in pyridine, piperidine, and 3,5-lutidine (25-100 ps) but does not occur at all in 2,6-lutidine in which the ligating nitrogen is sterically encumbered. The transient intermediate that is formed, which nominally could be either a five- or six-coordinate species, also has a ligand-dependent lifetime (200-550 ps). Decay of this intermediate occurs partially via ligand release to re-form the uncoordinated species, in competition with binding of the second axial ligand and/or conformational/electronic relaxations (of a six-coordinate intermediate) to give the ground state of the bis-ligated photoproduct. The finding that the photoproduct channel principally depends on ligand characteristics along with the time-evolving spectra suggests that the transient intermediate may involve a five-coordinate species. In contrast to NiDPP, the fluorinated analogues NiF(20)DPP and NiF(28)DPP do coordinate axial ligands in the ground state but eject them after photoexcitation. Collectively, these results demonstrate the sensitivity with which the electronic and structural characteristics of the macrocycle, substituents, and solvent (ligands) can govern the photophysical and photochemical properties of nonplanar porphyrins and open new avenues for exploring photoinduced ligand association and dissociation behavior.     

Observation and interpretation of HH coupling in 1H187Os satellite NMR spectra

The single hydride resonance observed for each of the compounds H₃Os₃(CO)₉CX (X = OMe, Br, H) has one set of ¹⁸⁷Os satellites which are further split into doublets by HH coupling. The implications of this observation for structural assignments based on ¹⁸⁷Os satellites are discussed.     

Determination of Interparticle Forces by Colloidal Particle Scattering: A Simulation Study

Preflocculated ferric hydroxide flocs were subjected to either a simple shear flow or a two-dimensional straining flow, and their motion was optically observed. Digital image analysis was applied to extract information on orientation and deformation from the digitized frames. It was found that the simple shear flow led to a rotation of the flocs whose motion can be understood from the behavior of a solid ellipsoid. In the extensional flow, no continuous rotation occurred and flocs were broken apart along the axis of straining. The rupture forces estimated from an ellipsoid model were found to be in the range of 0.1 N/m(2). Copyright 2000 Academic Press.     

A strain-promoted [3 + 2] azide-alkyne cycloaddition for covalent modification of biomolecules in living systems

Selective chemical reactions that are orthogonal to the diverse functionality of biological systems have become important tools in the field of chemical biology. Two notable examples are the Staudinger ligation of azides and phosphines and the Cu(I)-catalyzed [3 + 2] cycloaddition of azides and alkynes ("click chemistry"). The Staudinger ligation has sufficient biocompatibility for performance in living animals but suffers from phosphine oxidation and synthetic challenges. Click chemistry obviates the requirement of phosphines, but the Cu(I) catalyst is toxic to cells, thereby precluding in vivo applications. Here we present a strain-promoted [3 + 2] cycloaddition between cyclooctynes and azides that proceeds under physiological conditions without the need for a catalyst. The utility of the reaction was demonstrated by selective modification of biomolecules in vitro and on living cells, with no apparent toxicity.