Five-coordinate Fe(III)NO and Fe(II)CO porphyrinates: where are the electrons and why does it matter?

Recent years have seen dramatic growth in our understanding of the biological roles of nitric oxide (NO). Yet, the fundamental underpinnings of its reactivities with transition metal centers in proteins and enzymes, the stabilities of their structures, and the relationships between structure and reactivity remains, to a significant extent, elusive. This is especially true for the so-called ferric heme nitrosyls ([FeNO](6) in the Enemark-Feltham scheme). The Fe-CO and C-O bond strengths in the isoelectronic ferrous carbonyl complexes are widely recognized to be inversely correlated and sensitive to structural, environmental, and electronic factors. On the other hand, the Fe-NO and N-O bonds in [FeNO](6) heme complexes exhibit seemingly inconsistent behavior in response to varying structure and environment. This report contains resonance Raman and density functional theory results that suggest a new model for FeNO bonding in five-coordinate [FeNO](6) complexes. On the basis of resonance Raman and FTIR data, a direct correlation between the nu(Fe)(-)(NO) and nu(N)(-)(O) frequencies of [Fe(OEP)NO](ClO(4)) and [Fe(OEP)NO](ClO(4)).CHCl(3) (two crystal forms of the same complex) has been established. Density functional theory calculations show that the relationship between Fe-NO and N-O bond strengths is responsive to FeNO electron density in three molecular orbitals. The highest energy orbital of the three is sigma-antibonding with respect to the entire FeNO unit. The other two comprise a lower-energy, degenerate, or nearly degenerate pair that is pi-bonding with respect to Fe-NO and pi-antibonding with respect to N-O. The relative sensitivities of the electron density distributions in these orbitals are shown to be consistent with all published indicators of Fe-N-O bond strengths and angles, including the examples reported here.     

Dyeing uric acid crystals with methylene blue

The growth of anhydrous uric acid (UA) and uric acid dihydrate (UAD) crystals from supersaturated aqueous solutions containing methylene blue, a cationic organic dye, has been investigated. Low concentrations of dye molecules were found to be included in both types of crystal matrixes during the growth process. Incorporation of dye into UA crystals occurs with high specificity, affecting primarily [001] and [201] growth sectors, while UAD crystals grown from solutions of similar dye concentration show inclusion but little specificity. The orientation of the UA-trapped species was determined from polarization data obtained from visible light microspectrometry. To achieve charge neutrality, a second anionic species must also be included with the methylene blue into UA and UAD crystal matrices. Under high pH conditions, crystallization of 1:1 stoichiometric mixtures of methylene blue and urate yields methylene blue hexahydrate (MBU.6(H2O). The crystal structure of MBU.6(H2O) reveals continuous pi-pi stacks of planes of dye cations and urate anions mediated by water molecules. This structure provides an optimal geometry for methylene blue-urate pairs and additional support for the incorporation of these dimers in uric acid single-crystal matrices. The strikingly different inclusion patterns in UA and UAD demonstrate that subtle changes in the crystal surfaces and/or growth dynamics can greatly affect recognition events.     

Assay development and high-throughput screening of caspases in microfluidic format

Caspase proteases are familiar targets in drug discovery. A common format for screening to identify caspase inhibitors employs fluorogenic or colorimetric tetra-peptide substrates in 96, 384, or 1536 -well microtiter plates. The primary motivation for increasing the number of wells per plate is to reduce the reagent cost per test and increase the throughput of HTS operations. There are significant challenges, however, to moving into or beyond the 1536-well format, such as submicroliter liquid handling, liquid evaporation, increased surface area-to-volume ratios, and the potential for artifacts and interference from small air-borne particles such as lint. Therefore, HTS scientists remain keenly interested in technologies that offer alternatives to the ever-shrinking microtiter plate well. Microfluidic assay technology represents an attractive option that, in theory, consumes only subnanoliter volumes of reagents per test. We have successfully employed a microfluidic assay technology in fluorogenic screening assays for several caspase isoforms utilizing the Caliper Technologies Labchip platform. Caspase-3 is used as a representative case to describe microfluidic assay development and initial high-throughput screening results. In addition, microfluidic screening and plate-based screening are compared in terms of reagent consumption, data quality, and ease of operation.     

A L-RNA aptamer chiral stationary phase for the resolution of target and related compounds

In this paper, we report for the first time an aptamer-based chiral stationary phase (CSP) able to resolve racemates of both target and various related compounds. The enantiomers of tyrosine and analogues (11 enantiomeric pairs) were separated using an immobilized tyrosine-specific L-RNA aptamer as CSP and an aqueous buffer (8 mM Tris-HCl buffer, 25 mM NaCl, 5 mM MgCl2; pH 7.4) as mobile phase, at a column temperature of 10 degrees C. It appeared that the carboxylic and amino groups as well as the aromatic side chain of amino acid controlled the stereospecific recognition. Modifications on the polar groups were strongly detrimental for enantioselectivity while the replacement of the phenolic group by some bicyclic aromatic residues of different polarity, size or shape did not impair the enantioselective interaction. In addition, the effects of the mobile phase composition and column temperature upon the retention and stereoselective properties of the CSP were assessed. Finally, it was found that the immobilized RNA aptamer could be used under hydro-organic mobile phase conditions without alteration of the stationary phase stability.     

Solvothermal syntheses of Cu3P via reactions of amorphous red phosphorus with a variety of copper sources

Polycrystalline Cu₃P was successfully prepared under a wide variety of solvothermal conditions. The reaction of red phosphorus with several copper sources (copper metal, copper (I) iodide, copper (I) chloride and copper (II) chloride) at 150-200 °C for 1-2 days in water produced Cu₃P. Products were examined with powder X-ray diffraction, scanning electron microscopy and energy dispersive spectroscopy. Thermal analyses and optical spectroscopy were also performed. A detailed list of reaction conditions, products and impurity phases (where applicable) are reported.     

Rearrangement of epoxynitriles: a convenient homologation of acyclic and cyclic ketones to carboxylic acids

A convenient two-step homologation of both aliphatic and aromatic ketones to the corresponding carboxylic acid has been developed. First ketones were converted to epoxynitriles with the Darzens reaction. Second, a Lewis acid mediated rearrangement of these epoxynitriles with lithium bromide was achieved to give homologated secondary alkanoic acids (as well as aryl-alkanoic) in good yields. The mechanism and the scope of the rearrangement reaction were investigated. This strategy constitutes a two-step homologation of ketones to secondary carboxylic acids.     

Synthesis and Circular Dichroism of Both Enantiomers of 2-deuterofluoroacetic acid ( Fluoro[2H1]acetic acid)

Sharpless epoxidation of (E)-1-(trimethylsilyl)[1-²H₁]oct-1-en-3-o1 ( 3a ) yielded (1S,2S,3S)- and (1R,2R,3R)-1-(trimethylsilyl)-1,2-epoxy[1-²H₁]octan-3-ols ( 4a and 4b , resp.) which were converted in three steps into (S)- and (R)-fluoro[ ²H₁]acetic acid ( 7a and 7b , resp.) in good yields. Their high isotopic and optical purity was established by ¹H- and ¹⁹F-NMR, mass, and circular-dichroism spectroscopy.     

Use of a native affinity ligand for the detection of G proteins by capillary isoelectric focusing with laser-induced fluorescence detection

Affinity probe capillary isoelectric focusing (CIEF) with laser-induced fluorescence was explored for detection of Ras-like G proteins. In the assay, a fluorescent BODIPY FL GTP analogue (BGTPgammaS) and G protein were incubated resulting in formation of BGTPgammaS-G protein complex. Excess BGTPgammaS was separated from BGTPgammaS-G protein complex by CIEF using a 3-10 pH gradient and detected in whole-column imaging mode. In other cases, a single point detector was used to detect zones during the focusing step of CIEF using a 2.5-5 pH gradient. In this case, analyte peaks passed the detector in approximately 5 min at an electric field of 350 V/cm. Detection during focusing allowed for more reproducible assays at shorter times but with a sacrifice in sensitivity compared to detection during mobilization. Resolution was adequate to separate BGTPgammaS-Ras and BGTPgammaS-Rab3A complexes. Formation of specific complexes was confirmed by adding GTPgammaS to samples containing BGTPgammaS-G protein. GTPgammaS competed with BGTPgammaS for G protein binding sites resulting in decreased BGTPgammaS-G protein peak heights. The concentrating effect of CIEF enabled detection limits of 30 pM.     

Structural analysis of metal interactions with the dinucleotide duplex, dCG x dCG, using ion mobility mass spectrometry

The metal binding properties of the dinucleotide duplex, dCG x dCG, were analyzed in the gas phase with ion mobility mass spectrometry. Both MALDI and ESI were used to generate [M(dCG x dCG)]+ complexes. The collision cross section of each complex was measured in helium using ion mobility based methods and compared to calculated cross sections of theoretical structures. When metal cations classified as hard acids were combined with dCG x dCG, the [M(dCG x dCG)]+ complex organized into a globular structure. However, when soft acid metal cations were examined, a structure was observed where the two C-G base pairs were Watson-Crick bound.     

Structure–Activity Relationship Development Efforts towards Peripherally Selective Analogs of the Cannabinoid Receptor Partial Agonist BAY 59-3074

Selective modulation of peripheral cannabinoid receptors (CBRs) has potential therapeutic applications in medical conditions, including obesity, diabetes, liver diseases, GI disorders and pain. While there have been considerable efforts to produce selective antagonists or full agonists of CBRs, there has been limited reports on the development of partial agonists. Partial agonists targeting peripheral CBRs may have desirable pharmacological profiles while not producing centrally mediated dissociative effects. Bayer reported that BAY 59-3074 is a CNS penetrant partial agonist of both CB1 and CB2 receptors with efficacy in rat models of neuropathic and inflammatory pain. In this report, we demonstrate our efforts to synthesize analogs that would favor peripheral selectivity, while maintaining partial agonism of CB1. Our efforts led to the identification of a novel compound, which is a partial agonist of the human CB1 (hCB1) receptor with vastly diminished brain exposure compared to BAY 59-3074.