Two 3D supramolecular polymers constructed from an amino acid and a high-nuclear Ln6Cu24 cluster node

The first successful attempt to construct 3D supramolecular frameworks with high-nuclear 3d-4f heterometallic clusters as a node is reported. The self-assembly of Ln3+, Cu2+ and amino acid in solution leads to the formation of two polymers, 35-nuclear complex [Sm6Cu29] 1 with a primitive cubic net-like structure and 36-nuclear complex [Nd6Cu30] 2 with a face-centred cubic network type structure. Glycine and L-proline, respectively, were used as ligands. It should be noted that 2 has a chiral framework. X-ray structure analyses show that 1 crystallizes in the triclinic P1 space group (a=19.6451(8), b=20.4682(8), c=20.7046(8) A, alpha=89.453(1), beta=66.290(1), gamma=68.572(1) degrees, V=7003.0(5) A3 and Z=1) and 2 belongs to the cubic P2(1)3 space group (a=b=c=32.4341(3) A, V=34 119.7(5) A3 and Z=4). Both complexes utilize Ln6Cu24 octahedral clusters as nodes and trans-Cu(amino acid)2 groups as bridges. Electrical conductivity measurements reveal that both polymers behave as semiconductors.     

Anwendung der Streustrahl-Methode zur Bestimmung der Elemente in Mineral?lprodukten mit Hilfe der R?ntgenfluorescenz-Spektral-Analyse am Beispiel der Bleibestimmung in Ottokraftstoffen

Zusammenfassung In einem relativ einfach durchzuführenden Verbundverfahren wird Selen im Sauerstoff-strom innerhalb 15 min bei 1100–1150°C quantitativ aus den Metall- bzw. Metalloxidschmelzen verdampft und in einer mit flüssigem Stickstoff gekühlten Vorlage aufgefangen. Das aus der Vorlage mit einer definierten Menge verdünnter HNO₃ in Gegenwart von Ni-Nitrat gelöste Selen läßt sich direkt durch AAS mit dem Graphitofen (FAAS) äußerst nachweisstark und zuverlässig bestimmen. Die Nachweisgrenze (elektrodenlose Entladungslampe) liegt bei 3×10^–11 g Se. Der Verfahrensverbund erlaubt mit Probenmengen 10 g in Ag und Au Se-Gehalte 0,05 ppb,inCu 0,1 ppb,in Bi 0,2 ppb und in Pb 10 ppb zu erfassen. Für draht-, stab- und spanförmige Proben erhält man für Se-Gehalte von 2–0,002 ppm Variationskoeffizienten zwischen 3 und 6%. Die Vollständigkeit der Se-Verdampfung aus den Matrices Cu, Ag, Au und Bi wurde ebenso wie die Richtigkeit des Gesamtverfahrens durch systematische Untersuchungen belegt.

---

Determination of se by furnace atomic absorption spectrometry (FAAS) in the ppb-range in Cu, Cu alloys, Ag, Au, Pb and Bi after volatilization in an oxygen stream

Summary Selenium is evaporated in a multi-stage procedure within 15 min from metals or metal oxides fused at temperatures of 1100–1150°C under a stream of oxygen and is trapped in a receiver cooled with liquid nitrogen. The condensed SeO₂ is dissolved with a definite volume of diluted HNO₃ in the presence of Ni-nitrate and determined with high sensitivity and reliability by FAAS (electrodeless discharge lamp). The detection limit of the FAAS was found to be 3 · 10^–11 g of Se. The multi-stage procedure allows to detect Se levels 0.05 ppb in Ag and Au, 0.1 ppb in Cu, 0.2 ppb in Bi, and 10 ppb in Pb, respectively, with sample weights 10 g. For wire, rod, and chip samples the coefficients of variation are found to be between 3 and 6% for Se contents of 2 to 0.002 ppm. The quantitative evaporation of Se from Cu, Ag, Au, and Bi as well as the accuracy of the whole procedure have been checked systematically.

Die Arbeit wurde durch Mittel der DFG in dankenswerter Weise unterstützt.     

Quelques precisions sur les effets catalytiques des micelles cationiques hydroxylees

The alkaline hydrolysis of p-nitrophenyl acetate and of CH₃CO₂(CH₂)₂N⁺(CH₃)₂C₁₆H₃₃, Br^? was studied in the presence of micelles C₁₆H₃₃N⁺(CH₃)₂CH₂CH₂OH, Br^? and CTAB, C₁₆H₃₃N⁺(CH₃)₃,Br^?. A pathway involving an intermediate is suggested for the hydrolysis of the ester. Hydrolysis rate of the intermediate in the presence of micelles is the same as hydrolysis rate for the ester in the absence of micelles. Consequently, hydrolysis of p-nitrophenyl acetate is not catalysed by one type of micelle, while it is enhanced by another type of micelle.     

Further solvent-free reactions of ferrocenylaldehydes: Synthesis of 1,1′-ferrocenyldiimines and ferrocenylacrylonitriles

Grinding of 1,1′-ferrocenedicarboxaldehyde with a 2.2 molar equivalent of an aromatic amine in a solvent-free environment provided excellent yields of 1,1′-ferrocenyldiimines. After mixing the aldehyde and amines, a gum or melt formed which eventually solidified to the product. An analytically pure sample of the product was obtained by cold recrystallization. Grinding of ferrocenecarboxaldehyde and 4-substituted phenylacetonitriles under solvent-free conditions provided good yields of the corresponding ferrocenylacrylonitriles. The yield in this reaction was very low when the substituent group para to the acetonitrile group was electron-donating.     

Comments on the electronic properties of cyclopropane,cyclobutane, and cyclohexane

Spectral quantities of cyclopropane, cyclobutane, cyclohexane, and of several derivatives, have been calculated by a semiempirical all-valence electron SCF-CI MO method. In cyclopropane, HOMO is practically localized in the carbon-frame, and LVMO is purely so. In cyclobutane, these two MO's are based on C-H bonds, while cyclohexane holds an intermediate position. Despite the overall similarity-experimental and computed-of the spectra of these molecules, assignments are non-parallel. Like cyclopropane, cyclobutane can extend conjugation, but to a diminished degree; cyclohexane behaves in this respect like an acyclic alkane. An interpretation of this gradation, in terms of the nature of high-lying MO's, is proposed.     

Ternäre Lithium-Selten-Erd-Nitrate mit einsamen Nitrationen: Li3[M(NO3)5](NO3) (M = Gd?Lu,Y). Die Kristallstruktur von Li3Er(NO3)6

Ternary Lithium Rare Earth Nitrates with Lonesome Nitrate Ions: Li₃[M(NO₃)₅](NO₃) (M = Gd? Lu, Y). The Crystal Structure of Li₃Er(NO₃)₆ Single crystals of the ternary nitrate Li₃Er(NO₃)₆ are obtained from a solution of “Er(NO₃)₃” in the melt of LiNO₃. In Li₃Er(NO₃)₆ (monoclinic, P2₁/n, Z = 4; a = 776.0(1); b = 748.86(8); c = 2 396(1) pm; β = 90.76(3)°; R1 = 0.0490; wR2 = 0.0792), Er³⁺ is surrounded by five bidentate nitrate ligands yielding the anionic units [Er(NO₃)₅]^2?. These are arranged in the direction of the 2₁ screw axis. Two lonesome NO₃^? ions are in the middle of such a “helix” and are connected by Li⁺ with the anions [Er(NO₃)₅]^2?. The helices are moved against each other by about half of the lattice constant a and are connected by further Li⁺ ions.     

A novel indicator series for measuring pKa values in acetonitrile

A series of substituted azobenzene dyes was found to span a range of 8 pK_a units in acetonitrile. The UV absorption spectra of the dyes are responsive to protonation, changing in both absorption maximum and intensity. These characteristics make the dyes useful as indicators for the measurement of pK_a values of neutral organic bases that absorb in the visible region of the spectrum.     

Palladium-induced cyclizations for the synthesis of cis-2,5-disubstituted-3-methylenetetrahydrofurans: studies of the C7-C22 core of amphidinolide K

[formula: see text] The diastereoselective synthesis of cis-2,5-disubstituted-3-methylenetetrahydrofurans via Pd(0)-catalyzed cyclization of 2-methylene-1,4-diols is described. Investigations into the scope of the reaction and its application toward the synthesis of amphidinolide K is reported.     

Mesoporous silica-supported uranyl: synthesis and photoreactivity

A mesoporous silica-supported uranyl material (U(aq)O(2)(2+)-silica) was prepared by a co-condensation method. Our approach involves an I(-)M(+)S(-) scheme, where the electrostatic interaction between the anionic inorganic precursor (I(-)), surfactant (S(-)), and cationic mediator (M(+)) provides the basis for the stability of the composite material. The synthesis was carried out under acidic conditions, where the anionic sodium dodecyl sulfate provided the template for the uranyl cation and silicate to condense. Excitation with visible or near-UV light of aqueous suspensions of U(aq)O(2)(2+)-silica generates an excited state that decays with k(0) = 1.5 x 10(4) s(-1). The reaction of the excited state with aliphatic alcohols exhibits kinetic saturation and concentration-dependent kinetic isotope effects. For 2-propanol, the value of k(C)3(H)7(OH)/k(C)()3(D)7(OH) decreases from 2.0 at low alcohol concentrations to 1.0 in the saturation regime at high alcohol concentrations. Taken together, the data describe a kinetic system controlled by chemical reaction at one extreme and diffusion at the other. At low [alcohol], the second-order rate constants for the reaction of silica-U(aq)O(2)(2+) with methanol, 2-propanol, 2-butanol, and 2-pentanol are comparable to the rate constants obtained for these alcohols in homogeneous aqueous solutions containing H(3)PO(4). Under slow steady-state photolysis in O(2)-saturated suspensions, U(aq)O(2)(2+)-silica acts as a photocatalyst for the oxidation of alcohols with O(2).     

Novel binding of beryllium to dicarboxyimidazole-based model compounds and polymers

The ligand 4,5-dicarboxyimidazole (H(2)DCI) and its methyl derivative 1-methyl-4,5-dicarboxyimidazole (H(2)MDCI) have been shown to bind to Be(II) forming a zwitterionic species that has been structurally characterized. A new dicarboxyimidazole-based polymer has been prepared and its Be-binding properties have been studied using NMR ((1)H and (9)Be) and fluorescence spectroscopy; it represents a rare example of beryllium binding to a polymer. Models of the mononuclear and polymeric Be(II)-binding sites have been studied using density functional theory (DFT), and the (9)Be NMR chemical shifts of these model materials have been calculated for the purpose of direct comparison to experimentally observed values. Differences in the binding modes of the mononuclear and polymeric species are discussed.