First Study of Weak (EC+β+) Decay Branch for the Neutron-Deficient Isotoep 209Fr

²⁰⁹Fr has been produced by irradiation of ¹⁹⁷Au with ¹⁶O from SFC accelarator uia the fusion-evaporation 4n channel.The(EC+β⁺)decay of ²⁰⁹Fr has been studied by a He-jet tape transport system.The decay scheme is proposed for the first time based on γ-t,X-γ-t,γ-γ-t coincidece and γ-γ delay coincidence measurements,which takes account of 20 observed γ ray.Five members of low-lying states in ²⁰⁹Rn can be explained by the multi-plet [(²¹⁰Rn2⁺)(νf_5/2)^－1].The branching ratio for(EC+β⁺) decay of ²⁰⁹Fr has been estimated experimentaly to be(3.0±1.5)%.     

铝的激发光谱的测量

用１２０ｋｅＶ的Ａｌ＋离子与１０μｇ／ｃｍ２的碳箔相互作用，研究ＡｌⅠ、ＡｌⅡ和ＡｌⅢ的激发光谱，其结果与其它实验进行了比较。     

一种新的网络传播中最有影响力的节点发现方法

在复杂网络的传播模型研究中, 如何发现最具影响力的传播节点在理论和现实应用中都有重大的意义. 目前的研究一般使用节点的度数、紧密度、介数和K-shell等中心化指标来评价影响力, 这种方法虽然简单, 但是由于它们仅利用了节点自身的内部属性, 因而在评价影响力时精确度并不高, 普遍性适用性较弱.为了解决这个问题, 本文提出了KSC (K-shell and community centrality)指标模型. 此模型不但考虑了节点的内部属性, 而且还综合考虑了节点的外部属性, 例如节点所属的社区等. 然后利用SIR (susceptible-infected-recovered)模型对传播过程进行仿真, 实验证明所提出的方法可以更好地发现最具有影响力的节点, 且可适用于各种复杂网络. 本文为这项具有挑战性研究提供了新的思想和方法. 关键词： 复杂网络 最具影响力的节点 社区划分 中性化测量     

纳米Ni在77 K温度下压缩行为的研究

利用低温力学测试系统研究了电化学沉积纳米Ni在77 K温度下的压缩行为. 室温下纳米Ni 的屈服强度为 2.0 GPa, 77 K温度下的屈服强度为3.0 GPa, 压缩变形量则由室温的10%左右下降到5%. 借助应变速率敏感指数、激活体积、扫描电子显微和高分辨透射电子显微分析, 对纳米Ni的塑性变形机制进行了表征. 研究表明, 在77 K温度下的塑性变形主要是由晶界-位错协调变形主导, 晶界本征位错弓出后无阻碍地在晶粒内无位错区运动, 直至在相对晶界发生类似切割林位错行为. 同时分析了弓出位错的残留位错部分在协调塑性变形时起到的增加应变相容性和减小应力集中的作用. 利用晶界-位错协调机制和残留位错运动与温度及缺陷的相关性揭示了纳米Ni室温和77 K温度压缩性能差异的内在原因. 关键词： 塑性变形 强度 位错     

H∞ stochastic synchronization for master–slave semi‐Markovian switching system via sliding mode control

In this article, synchronization problem of master–slave system with phase‐type semi‐Markovian switching is investigated via sliding mode control scheme. By utilizing a supplementary variable technique and a plant transformation, the master–slave semi‐Markovian switching system can be equivalently expressed as its associated Markovian switching system. Then an integral sliding surface is constructed to guarantee stochastic synchronization of master–slave semi‐Markovian switching system, and the suitable controller is synthesized to ensure that the trajectory of the closed‐loop error system can be driven onto the prescribed sliding mode surface. Finally, numerical simulations are presented to show the effectiveness of the proposed sliding‐mode design scheme. © 2015 Wiley Periodicals, Inc. Complexity 21: 430–441, 2016     

Multifractal Analysis of Dimension Spectrum in Non-uniformly Hyperbolic Systems

Mediterranean Journal of Mathematics - We study the multifractal analysis of dimension spectrum for almost additive potentials in a class of one-dimensional non-uniformly hyperbolic dynamic systems.     

Heat kernel estimates for the Bessel differential operator in half‐line

In the paper we consider the Bessel differential operator in half‐line , , and its Dirichlet heat kernel . For , by combining analytical and probabilistic methods, we provide sharp two‐sided estimates of the heat kernel for the whole range of the space parameters and every , which complements the recent results given in 1 , where the case was considered.     

Cu/HMOR催化二甲醚羰基化合成乙酸甲酯: 催化剂制备方法的影响 (cited: 2)

采用氨蒸发法、尿素水解法、离子交换法及浸渍法制备HMOR负载的Cu催化剂, 考察其催化二甲醚(DME)羰基化合成乙酸甲酯(MA)性能. 结果表明离子交换法制得Cu/HMOR催化剂在Cu的金属中心和酸性分子筛载体的共同作用下具有较好催化反应活性. 在210 oC、1.5 MPa、空速4883 h^-1,DME转化率为95.3%,MA选择性为94.9%. 对催化剂进行N2物理吸附、X射线衍射、NH₃程序升温脱附和CO程序升温脱附等表征发现,离子交换法制得Cu/HMOR催化剂具有较高比表面、大量弱酸及一定中强酸、适中的CO吸附强度,提高了CO插入DME羰基化反应活性.     

一维锰氧化物纳米棒在以O2为氧源的苯甲醇氧化反应中的催化性能

采用水热法合成MnOOH一维纳米线,通过MnOOH在不同气氛和温度中煅烧得到尺寸和形貌相似的不同锰氧化物,并用于以O₂为氧源的苯甲醇液相氧化反应. 结果表明,MnO₂对苯甲醇氧化反应具有较高的催化活性. 通过XPS、SEM、TEM和H₂-TPR等手段对催化剂的形貌和结构进行了表征,并讨论了可能影响反应活性的一些因素. MnO₂的良好催化性能可能与其晶格氧具有较高的迁移率以及氧化还原能力有关. 通过简单的焙烧处理,可以使MnO₂催化剂在苯甲醇氧化反应中具有良好的重复使用性.     

Experimental Investigation of the Effect of Purge Flow and Main Flow Interaction in a Low-Speed Turbine Cascade Passage

In order to protect the vulnerable turbine components from extreme high temperature, coolant flow is introduced from the compressor to the disk cavity, inevitably interacting with the main flow. This paper describes an experimental investigation of the interaction between the main flow and the purge flow in a low-speed turbine cascade with three purge flow rates, Cm = 0, Cm = 1%, and Cm = 2%. In order to study the effect of the interaction between the main flow and the purge flow on the secondary flows, a Rortex method developed by Liu Chaoquan is introduced to identify the vortex in the flow field. In the meantime, a method to calculate the mean entropy production rate based on the particle image velocimetry (PIV) result is adopted to investigate the flow loss. The PIV result indicates that the purge flow has a prominent impact on the flow field of the cascade passage, changing the velocity distribution that induces a local blockage area. The results of vortex identification show that the purge flow promotes the generation of the passage vortex near the suction side. In addition, the purge flow makes the passage vortex migrate to the tip wall direction, enlarging the region affected by the secondary flow. The mean entropy production (MEP) result shows that the flow loss is mainly caused by the passage vortex. The coincidence of the high-MEP region and the location of the passage vortex indicates that the purge flow increases the secondary flow loss by affecting the formation and the migration of the passage vortex.