Determination of cadmium in water samples by graphite furnace atomic absorption spectrometry after cloud point extraction

The formation of a complex with 2-(5-brom-2-pyridylazo)-5-(diethylamino)-phenol (5-Br-PADAP) and cloud point extraction have been applied to the preconcentration of cadmium followed by its determination by graphite furnace atomic absorption spectrometry (GFAAS) using octylphenoxypolyethoxyethanol (TritonX-114) as surfactant. The chemical variables affecting the separation were optimized. At pH 7.0, preconcentration of only 10 mL of sample in the presence of 0.05% TritonX-114 and 2.5 × 10⁻⁶ M 5-Br-PADAP enabled the detection of 0.04 μg/L cadmium. The enrichment factor was 21 for cadmium. The regression equation was A = 0.0439C(μg/L) + 7.2 × 10⁻³. The correlation coefficient was 0.9995. The precision for 10 replicate determinations at 10 μg/L Cd was 2.7% relative standard deviation (RSD). The proposed method has been applied to the determination of cadmium in water samples. The text was submitted by the authors in English.     

具有三维交叉孔道的新型亚磷酸锌的合成与结构

本文报道了一种新型三维亚磷酸锌[HO(CH₂)₂NH₃]₂•[Zn₃(HPO₃)₄]的合成和晶体结构。在它的结构中，ZnO₄和HPO₃严格按照顶点连接的方式交替相连。骨架结构存在两个沿着不同方向无限延伸的由ZnO₄和HPO₃组成的四元环链，在[0 1 0]、[0 4 15]和[0 -4 15]三个方向形成了三个交叉8元环孔道，有机胺阳离子起着平衡电荷和稳定骨架的结构。它的晶体数据为：[HO(CH₂)₂NH₃]₂•[Zn₃(HPO₃)₄],M=640.21, 正交晶系, Fdd2空间群, a=2.8528, b=0.8426, c=1.6159nm, Z=8, V=3.884nm³, R₁=0.0219, wR₂=0.0544。     

Determination of adefovir in human plasma by liquid chromatography/tandem mass spectrometry: application to a pharmacokinetic study

A liquid chromatography/tandem mass spectrometry (LC/MS/MS) method was developed and validated to determine the concentrations of adefovir [9-(2-phosphonylmethoxyethyl)adenine, PMEA] in human plasma. After one-step protein precipitation of plasma samples by methanol, adefovir was analyzed by LC/MS/MS using positive electrospray ionization. Chromatography was performed on a C18 column. The extraction recoveries of adefovir were found to be 85.1-89.3%. Adefovir was stable under routine laboratory conditions. A minimal matrix effect resulting in a slight ionization enhancement of adefovir (<10.9%) was observed, which did not markedly affect the behavior of the calibrations curves and accuracy and precision data. The method had a chromatographic run time of 7.8 min and a linear calibration curve over the concentration range 1.5-90 ng/mL for adefovir. The lower limit of quantification of the method was 1.5 ng/mL. The intra- and inter-day precision was less than 8.4%. These results indicated that this LC/MS/MS method has high selectivity and efficiency, and acceptable accuracy, precision and sensitivity. The validated LC/MS/MS method has been successfully used in a pharmacokinetic study in healthy volunteers treated with oral adefovir dipivoxil at 10 and 20 mg.     

二甲基甲酰胺中四种钕盐的电导

通过电导测量研究了四种钕盐：Nd(CF3SO3)3、Nd(ClO4)3、Nd(NO3)3和NdCl3在极性非质子溶剂DMF中的电导性质.利用线性拟合方法求得在25 ℃下Nd(CF3SO3)3和Nd(ClO4)3的极限摩尔电导率分别为278.8和 280.7 S•cm2•mol－1.用间接方法求得Nd(NO3)3 与NdCl3 的极限摩尔电导率分别为297.2和287.3 S•cm2 •mol－1.在25～65 ℃温度范围内，Nd(CF3SO3)3和Nd(ClO4)3的电导率随温度呈线性变化. Nd(NO3)3和NdCl3的电导行为表现出明显的离子缔合.     

Radical copolymerization of citraconic acid with styrene in dioxane solution

Styrene and citraconic acid (CA) were copolymerized in the dioxane solution ranging mole fraction of CA in feed from 0.1 to 0.9 at 70 °C. The terminal and penultimate models were used to fit the copolymer composition equation. Curve fitting, Mayo-Lewis, Joshi-Joshi, Fineman-Ross, Ezrielev-Brokhina-Roskin, Kellen-Tüd?s methods were used to solve the copolymer equation in terminal model. Besides these methods Solver in Excel 97 was used to solve copolymer equation in terminal and penultimate models of copolymerization. Experimental mole fractions of CA and those predicted from both models are agreed within the precision of the method used for the copolymer analysis, so the copolymer composition does not permit a definite choice of the adequate copolymerization model.     

Determination of nitrite as pentafluorobenzyl derivative by RP-HPLC and UV detection with and without ion-pair extraction

Summary A reversed-phase high-performance liquid chromatographic (RP-HPLC) method with UV detection (270 nm) for the determination of nitrite as its pentafluorobenzyl derivative with and without ion-pair extraction is described. Ion-pair extraction of nitrite from aqueous solutions was performed by using a 1 mol/l solution of the liquid ion exchanger methyltrioctylammonium chloride in toluene. The residue of the ion-pair extraction or an aliquot of an aqueous nitrite solution or of a biological fluid (100 l) were treated with 400 l of acetone and 10 l of pentafluorobenzyl bromide. Nitrite was converted into its pentafluorobenzyl derivative by heating at 50°C for 90 min. After evaporation of acetone the aqueous phases were diluted with 100 to 400 l of methanol, and up to 100 l were injected into the RP-HPLC system. The method allows accurate analysis of nitrite in the presence of nitrate directly in aqueous solutions and biological fluids in concentrations down to 2.0 mg/l. The method is also applicable to the determination of nitrate following its reduction to nitrite by cadmium.     

冰晶石-氧化铝熔体结构的计算机模拟研究

用Monte Carlo法对冰晶石-氧化铝系熔体结构作了计算机模拟研究。结果表明: 熔体中既有含“氧桥”和“氟桥”的“多核”离子集团, 如F3Al-O-AlF_3、F_3Al-AlF_3、F_3Al—F—AlF_3—F等; 也有“单核”离子集团如AlF_5~(2-)、AlOF_3~(2-)等。熔体中还存在较松散的xNa~+·yF~-离子集团。熔体中不存在AlO_2~-或AlO_3~(3-)集团。     

Thermal Decomposition Kinetics of the Zn(II) Complex with Norfloxacin in Static Air Atmosphere

The thermal decomposition of Zn[NFA]₂5H₂O (NFA=C₁₆H₁₈FN₃O₃, norfloxacin) and its kinetics were studied under non-isothermal conditions in air by TG-DTG and DTA methods. The intermediate and residue for each decomposition were identified from the TG curve. The non-isothermal kinetic data were analyzed by means of the Achar method and the Madhusudanan-Krishnan-Ninan (MKN) method. The possible reaction mechanisms were investigated by comparing the kinetic parameters. The kinetic equation for the second stage can be expressed as d/dt=Aexp(–E/RT)(1–).This revised version was published online in November 2005 with corrections to the Cover Date.     

An integrated console for capsule-based,automated organic synthesis

The current laboratory practices of organic synthesis are labor intensive, impose safety and environmental hazards, and hamper the implementation of artificial intelligence guided drug discovery. Using a combination of reagent design, hardware engineering, and a simple operating system we provide an instrument capable of executing complex organic reactions with prepacked capsules. The machine conducts coupling reactions and delivers the purified products with minimal user involvement. Two desirable reaction classes – the synthesis of saturated N-heterocycles and reductive amination – were implemented, along with multi-step sequences that provide drug-like organic molecules in a fully automated manner. We envision that this system will serve as a console for developers to provide synthetic methods as integrated, user-friendly packages for conducting organic synthesis in a safe and convenient fashion.

Using a combination of reagent design, hardware engineering, and a simple operating system we provide an instrument capable of executing complex organic reactions using prepacked capsules with minimal user involvement.     

On-surface isostructural transformation from a hydrogen-bonded network to a coordination network for tuning the pore size and guest recognition

Rational manipulation of supramolecular structures on surfaces is of great importance and challenging. We show that imidazole-based hydrogen-bonded networks on a metal surface can transform into an isostructural coordination network for facile tuning of the pore size and guest recognition behaviours. Deposition of triangular-shaped benzotrisimidazole (H₃btim) molecules on Au(111)/Ag(111) surfaces gives honeycomb networks linked by double N–H⋯N hydrogen bonds. While the H₃btim hydrogen-bonded networks on Au(111) evaporate above 453 K, those on Ag(111) transform into isostructural [Ag₃(btim)] coordination networks based on double N–Ag–N bonds at 423 K, by virtue of the unconventional metal–acid replacement reaction (Ag reduces H⁺). The transformation expands the pore diameter of the honeycomb networks from 3.8 Å to 6.9 Å, giving remarkably different host–guest recognition behaviours for fullerene and ferrocene molecules based on the size compatibility mechanism.

A hydrogen-bonded network on a Ag(111) surface can transform into an isostructural Ag(i) coordination network, giving drastically different host–guest recognition behaviours.