Conformational Control of Oligo(p‐phenyleneethynylene)s with Intrinsic Substituent Electronic Effects: Origin of the Twist in Pentiptycene‐Containing Systems

Dependence of the backbone planarity of oligo(p‐phenyleneethynylene)s (OPEs) on the intrinsic electronic character of substituents and on the nature of the solvent has been experimentally demonstrated with a series of center‐symmetrical five‐ring systems, pentiptycene‐pentiptycene‐arene‐pentiptycene‐pentiptycene, differing in the substituents on the central arene. In frozen 2‐methyltetrahydrofuran (MTHF), the adjacent pentiptycene units prefer to be in a mutually twisted orientation when the substituents are electron‐withdrawing (F and amido), resulting in a TPPT or TTTT conformation, whereas a planarized PPPP backbone is favored in the case of electron‐donating substituents (alkyl and alkoxy). The propensity to adopt the PPPP form is generally enhanced by replacing MTHF with either methylcyclohexane or mixed ethanol/methanol as solvent. These observations reveal that the twist between adjacent pentiptycene units in OPEs is a consequence of the electronic rather than steric effects of iptycenyl substituents. The electronic effect of iptycenyl substituents is manifested in decreased phenylene π polarizability as the net effect of both electron‐donating hyperconjugation and an electron‐withdrawing inductive effect. Variable‐temperature electronic absorption and emission spectroscopies are the critical tools for this work. Our findings provide important guidelines for conformational and electronic engineering of OPEs and for the design of novel iptycene‐based organic electronic materials.     

Monitoring of PAHs in air by collection on XAD-2 adsorbent then microwave-assisted thermal desorption coupled with headspace solid-phase microextraction and gas chromatography with mass spectrometric detection

Microwave-assisted thermal desorption (MAD) coupled to headspace solid-phase microextraction (HS-SPME) has been studied for in-situ, one-step, sample preparation for PAHs collected on XAD-2 adsorbent, before gas chromatography with mass spectrometric detection. The PAHs on XAD-2 were desorbed into the extraction solution, evaporated into the headspace by use of microwave irradiation, and absorbed directly on a solid-phase microextraction fiber in the headspace. After desorption from the SPME fiber in the hot GC injection port, PAHs were analyzed by GC–MS. Conditions affecting extraction efficiency, for example extraction solution, addition of salt, stirring speed, SPME fiber coating, sampling temperature, microwave power and irradiation time, and desorption conditions were investigated. Experimental results indicated that extraction of 275 mg XAD-2, containing 10–200 ng PAHs, with 10-mL ethylene glycol–1 mol L⁻¹ NaCl solution, 7:3, by irradiation with 120 W for 40 min (the same as the extraction time), and collection with a PDMS–DVB fiber at 35 °C, resulted in the best extraction efficiency. Recovery was more than 80% and RSD was less than 14%. Optimum desorption was achieved by heating at 290 °C for 5 min. Detection limits varied from 0.02 to 1.0 ng for different PAHs. A real sample was obtained by using XAD-2 to collect smoke from indoor burning of joss sticks. The amounts of PAHs measured varied from 0.795 to 2.53 ng. The method is a simple and rapid procedure for determination of PAHs on XAD-2 absorbent, and is free from toxic organic solvents.     

A Microbial Sensor Based on Direct Electron Transfer at Shewanella Sp. Drop‐Coated Screen‐Printed Carbon Electrodes

Aerobically grown Shewanella sp. bacterial suspension drop‐coated on a disposable screen‐printed carbon electrode was found to possess electroactivity without the aid of redox mediator. Cyclic voltammetric studies revealed the characteristics of a mixed diffusion adsorption‐controlled electrochemical process for direct electron transfer at the bacteria‐modified electrode. Both FE‐SEM and ATR FT‐IR experiments were carried out to investigate the surface characteristics. The electroanalytical applicability was further demonstrated for electrocatalytic reduction of arsenite, hydrogen peroxide and nitrite. Low cost and very simple manufacturing procedure allow for the proposed bacterial sensor to be applied as disposable devices.     

Synthesis and applications of low‐bandgap conjugated polymers containing phenothiazine donor and various benzodiazole acceptors for polymer solar cells

A series of soluble donor‐acceptor conjugated polymers comprising of phenothiazine donor and various benzodiazole acceptors (i.e., benzothiadiazole, benzoselenodiazole, and benzoxadiazole) sandwiched between hexyl‐thiophene linkers were designed, synthesized, and used for the fabrication of polymer solar cells (PSC). The effects of the benzodiazole acceptors on the thermal, optical, electrochemical, and photovoltaic properties of these low‐bandgap (LBG) polymers were investigated. These LBG polymers possessed large molecular weight (M_n) in the range of 3.85?5.13 × 10⁴ with high thermal decomposition temperatures, which demonstrated broad absorption in the region of 300?750 nm with optical bandgaps of 1.80?1.93 eV. Both the HOMO energy level (?5.38 to ?5.47 eV) and LUMO energy level (?3.47 to ?3.60 eV) of the LBG polymers were within the desirable range of ideal energy level. Under 100 mW/cm² of AM 1.5 white‐light illumination, bulk heterojunction PSC devices containing an active layer of electron donor polymers mixed with electron acceptor [6,6]‐phenyl‐C₆₁‐butyric acid methyl ester (PC₆₁BM) or [6,6]‐phenyl‐C₇₁‐butyric acid methyl ester (PC₇₁BM) in different weight ratios were investigated. The best performance of the PSC device was obtained by using polymer PP6DHTBT as an electron donor and PC₇₁BM as an acceptor in the weight ratio of 1:4, and a power conversion efficiency value of 1.20%, an open‐circuit voltage (V_oc) value of 0.75 V, a short‐circuit current (J_sc) value of 4.60 mA/cm², and a fill factor (FF) value of 35.0% were achieved. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

An Asymptotic Ratio in the Complete Binary Tree

Let T _n be the complete binary tree of height n considered as the Hasse-diagram of a poset with its root 1 _n as the maximum element. For a rooted tree T, define two functions counting the embeddings of T into T _n as follows A(n;T)=|{S T _n  : 1 _n ∈S, S≅T}|, and B(n;T)=|{S T _n :1 _n ∉S, S≅T}|. In this paper we investigate the asymptotic behavior of the ratio A(n;T)/B(n;T), and we show that lim  _n→∞[A(n;T)/B(n;T)]=2^ℓ;−1−1, for any tree T with ℓ leaves. This revised version was published online in June 2006 with corrections to the Cover Date.     

Autoignition of methanol: Experiments and computations

An experimental and computational investigation into the autoignition of methanol under high‐pressure and low‐to‐intermediate temperature conditions is conducted. The ignition delay results have been obtained using a heated rapid compression machine, over a pressure range of 7–30 bar, a temperature range of 850–1100 K, and an equivalence ratio range of 0.25–2.0. Using kinetic schemes recently reported in the literature for the combustion of methanol, the experimental results are compared to computationally obtained values. The kinetic schemes studied are found to significantly underpredict ignition delays for the conditions investigated. A sensitivity analysis of the computed results to reaction rate constants is also conducted. It is shown that the reaction of methanol with HO₂ radical is critical to the predicted values of ignition delays under the current experimental conditions. © 2011 Wiley Periodicals, Inc. Int J Chem Kinet 43: 175–184, 2011     

Synthesis and applications of cyano‐vinylene‐based polymers containing cyclopentadithiophene and dithienosilole units for photovoltaic cells

Two β‐cyano‐thiophenevinylene‐based polymers containing cyclopentadithiophene ( CPDT‐CN ) and dithienosilole ( DTS‐CN ) units were synthesized via Stille coupling reaction with Pd(PPh₃)₄ as a catalyst. The effects of the bridged atoms (C and Si) and cyano‐vinylene groups on their thermal, optical, electrochemical, charge transporting, and photovoltaic properties were investigated. Both polymers possessed the highest occupied molecular orbital (HOMO) levels of about ?5.30 eV and the lowest unoccupied molecular orbital (LUMO) levels of about ?3.60 eV, and covered broad absorption ranges with narrow optical band gaps (ca. 1.6 eV). The bulk heterojunction polymer solar cell (PSC) devices containing an active layer of electron‐donor polymers ( CPDT‐CN and DTS‐CN ) blended with an electron‐acceptor, that is, [6,6]‐phenyl‐C₆₁‐butyric acid methyl ester (PC₆₁BM) or [6,6]‐phenyl‐C₇₁‐butyric acid methyl ester (PC₇₁BM), in different weight ratios were explored under 100 mW/cm² of AM 1.5 white‐light illumination. The PSC device based on DTS‐CN: PC₇₁BM (1:2 w/w) exhibited a best power conversion efficiency (PCE) value of 2.25% with V_oc = 0.74 V, J_sc = 8.39 mA/cm², and FF = 0.36. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Numerical experiments with several variant WENO schemes for the Euler equations

Numerical experiments with several variants of the original weighted essentially non‐oscillatory (WENO) schemes (J. Comput. Phys. 1996; 126 :202–228) including anti‐diffusive flux corrections, the mapped WENO scheme, and modified smoothness indicator are tested for the Euler equations. The TVD Runge–Kutta explicit time‐integrating scheme is adopted for unsteady flow computations and lower–upper symmetric‐Gauss–Seidel (LU‐SGS) implicit method is employed for the computation of steady‐state solutions. A numerical flux of the variant WENO scheme in flux limiter form is presented, which consists of first‐order and high‐order fluxes and allows for a more flexible choice of low‐order schemes. Computations of unsteady oblique shock wave diffraction over a wedge and steady transonic flows over NACA 0012 and RAE 2822 airfoils are presented to test and compare the methods. Various aspects of the variant WENO methods including contact discontinuity sharpening and steady‐state convergence rate are examined. By using the WENO scheme with anti‐diffusive flux corrections, the present solutions indicate that good convergence rate can be achieved and high‐order accuracy is maintained and contact discontinuities are sharpened markedly as compared with the original WENO schemes on the same meshes. Copyright © 2008 John Wiley & Sons, Ltd.