UV planar laser induced fluorescence imaging of hot carbon dioxide in a high-pressure flame

UV planar laser-induced fluorescence (PLIF) images of hot carbon dioxide (CO₂) are obtained in a laminar flame (CH₄/air) at high pressure (20 bar) with excitation wavelengths at 239.34 nm and 242.14 nm. Excitation wavelengths are chosen to minimize the contribution of nitric oxide and molecular oxygen LIF signals. Spectrally resolved single point measurements are used for correction of the remaining oxygen LIF interference. The continuum LIF signal from electronically excited CO₂ is detected in a broad (280–400 nm) emission region. The UV PLIF of hot CO₂ has the potential for application to a wide variety of diagnostic needs in high-pressure flames, combustors, and engines. PACS 42.62.Fi; 42.30.Va; 07.25+k; 39.30+w     

Measurements of near-IR water vapor absorption at high pressure and temperature

Tunable diode lasers (TDLs) are used to measure high resolution (0.1 cm^-1), near-infrared (NIR) water vapor absorption spectra at 700 K and pressures up to 30 atm within a high-pressure and -temperature optical cell in a high-uniformity tube furnace. Both direct absorption and wavelength modulation with second harmonic detection (WMS-2f) spectra are obtained for 6 cm^-1 regions near 7204 cm^-1 and 7435 cm^-1. Direct absorption measurements at 700 K and 10 atm are compared with simulations using spectral parameters from HITRAN and a hybrid database combining HITRAN with measured spectral constants for transitions in the two target spectral regions. The hybrid database reduces RMS error between the simulation and the measurements by 45% for the 7204 cm^-1 region and 28% for the 7435 cm^-1 region. At pressures above 10 atm, the breakdown of the impact approximation inherent to the Lorentzian line shape model becomes apparent in the direct absorption spectra, and measured results are in agreement with model results and trends at elevated temperatures reported in the literature. The wavelength-modulation spectra are shown to be less affected by the breakdown of the impact approximation and measurements agree well with the hybrid database predictions to higher pressures (30 atm). PACS 33.20.Ea; 42.62.Fi; 52.25.Os     

Laser-induced fluorescence of seeded nitric oxide as a flame thermometer

Received: 10 June 1997/Revised version: 25 November 1997     

Three-level operation of a diode-bar-pumped Yb:S-FAP laser

We present an all solid-state Yb:S-FAP laser system running on the three-level laser transition at 985 nm. The pump source was a high fill-factor laser diode bar, with the output reformatted using a two-mirror beamshaping system to produce a rectangular pump beam that focused to a square spot. A nearly on-axis multipassing system was used to obtain four pump passes through a 1.6 mm Yb:S-FAP laser crystal. Gain-switched three-level laser output was achieved with an efficiency of 4.3% with respect to incident pump power. Electro-optic Q-switching produced 0.12 mJ pulses for a pump pulse energy of 11 mJ. Intra-cavity second-harmonic generation yielded a maximum pulse energy at 492.5 nm of 12 μJ.     

A rapid and economical method for profiling feature heights during microfabrication

Quality control is an important and integral part to any microfabrication process. While the widths of features often can be easily assessed by light microscopy, the heights of the fabricated structures are more difficult to determine. Here, we present a rapid, accurate, and low-cost method to measure the heights of microfabricated structures during and after the fabrication process. This technique is based on white-light interferometry, which offers accuracy on the submicrometre scale.     

Hydrostaticity and hidden order: effects of experimental conditions on the temperature–pressure phase diagram of URu2Si2

The pressure dependence of the hidden order phase transition of URu₂Si₂ is shown to depend sensitively upon the quality of hydrostatic pressure conditions during electrical resistivity measurements. Hysteresis in pressure is demonstrated for two choices of pressure medium: the commonly used mixture of 1:1 Fluorinert FC70/FC77 and pure FC75. In contrast, no hysteresis is observed when the pressure medium is a 1:1 mixture of n-pentane/isoamyl alcohol, as it remains hydrostatic over the entire studied pressure range. Possible ramifications for the interpretation of the temperature–pressure phase diagram of URu₂Si₂ are discussed.     

Wavelength modulation diode laser absorption spectroscopy for high-pressure gas sensing

A general model for 1f-normalized wavelength modulation absorption spectroscopy with nf detection (i.e., WMS-nf) is presented that considers the performance of injection-current-tuned diode lasers and the reflective interference produced by other optical components on the line-of-sight (LOS) transmission intensity. This model explores the optimization of sensitive detection of optical absorption by species with structured spectra at elevated pressures. Predictions have been validated by comparison with measurements of the 1f-normalized WMS-nf (for n = 2–6) lineshape of the R(11) transition in the 1st overtone band of CO near 2.3 μm at four different pressures ranging from 5 to 20 atm, all at room temperature. The CO mole fractions measured by 1f-normalized WMS-2f, 3f, and 4f techniques agree with calibrated mixtures within 2.0 %. At conditions where absorption features are significantly broadened and large modulation depths are required, uncertainties in the WMS background signals due to reflective interference in the optical path can produce significant error in gas mole fraction measurements by 1f-normalized WMS-2f. However, such potential errors can be greatly reduced by using the higher harmonics, i.e., 1f-normalized WMS-nf with n > 2. In addition, less interference from pressure-broadened neighboring transitions has been observed for WMS with higher harmonics than for WMS-2f.     

Observation of luminescence from bound multiexciton complexes in gallium doped germanium

Spectrally resolved luminescence associated with the decay of bound multiexciton complexes in optically excited Ge:Ga is observed. This is the first reported observation of multiexciton complexes in p-type germanium. The observed spectra are consistent with the shell model for bound multiexciton complexes.No-phonon, TA, LA, and TO phonon assisted luminescence are observed. From these spectra, the energies of the LA, TA, and TO phonons in Ge:Ga are determined.     

Rapid formation kinetics of a long-lived electron-hole drop in Ge under pulsed excitation

The buildup of a large long-lived electron-hole drop in stressed Ge is studied using its Alfvén wave resonances. This microwave method permits rapid time resolution of the formation process after a short intense (100 nsec, 7 W) laser excitation pulse. A delay of about 1 μsec is observed before the drop radius rapidly increases from zero to ～ 100 μm within the next μsec. This is consistent with the interpretation that the photo-produced electron-hole pairs are quickly accelerated to the strain-induced potential minimum which is well within the crystal.