Syntheses of Theaspirone and Vitispirane via Palladium(II)-Catalyzed Oxaspirocyclization

Total syntheses of theaspirone (A and B) and vitispirane (A and B) are described. The key step in the syntheses is the palladium(II)-catalyzed intramolecular oxaspirocyclization of diene alcohol 4 to either vitispirane or the allylic alcohol 9. The outcome of the oxaspirocyclization is very much dependent on the solvent employed. In water-acetic acid (4:1) a 1:1 mixture of the diastereomeric alcohols 9A and 9B was exclusively formed. In water with 8 equiv of a strong non-nucleophilic acid, vitispiranes A and B (1:1) were obtained. An alternative procedure to obtain vitispirane with the use of LiCl and K(2)CO(3) is described. In the latter reaction vitispirane B is formed preferentially. This result is explained by an equilibrium between the two possible pi-allyl complexes 5A and 5B, the kinetically favored 5B being transformed into vitispirane 3B before isomerization to 5A occurs.     

Dirichlet Series and Curious infinite Products

By number-theoretical methods we give a result generalizingthose of J. O. Shallit, one particular case of which reads asfollows: ...=2^–;, where a(n) is equal to 1 if the sum of the digits of n in basetwo is even, and – 1 if this sum is odd. Moreover we provea conjecture of Shallit concerning a way of approximating 2^–     

Reductive cleavage of axially disymmetric tertiary amines and quaternary ammonium salts by lithium aluminium hydride. Synthesis of new 1,1′-binaphthyl substituted amines

Axially disymmetric tertiary amines or quaternary ammonium salts $\text{A}$ are synthesized by double alkylation of primary or secondary amines with racemic or optically pure 2,2′-bis (bromomethyl)-1,1′-binaphthyl. Their reductive cleavage by lithium aluminium hydride in refluxing THF leads to chiral secondary or tertiary amines $\text{B}$, substituted by a binaphthyl unit, with high yields and absence of racemization.     

Facile Preparation of (±)-12-Epiprostaglandins from 7-Oxabicyclo[2.2.1]hept-5-en-2-one via an all-cis-formyllactone related to Corey lactone

The bicyclic monoselenoacetal 7 , easily obtained from (±)-7-oxabicyclo[2.2.1]hept-5-en-2-one ( 6 ) via a radical addition-acyl migration sequence, was converted to racemic 12-epiprostaglandins 3 and 4 . The key intermediate was the all-cis-formyllactone 2b related to Corey lactone (see 12 ; Scheme 1). The presence of a (tert-butyl)-dimethylsilyl protective group for the 11-OH substituent (prostaglandin numbering) was found to be crucial in avoidingβ -elimination and epimerization during the Wittig-Horner reaction (Scheme 2). Epimerization at C(12) at the formyllactone stage (see 2b ) was also possible and gave the known precursor 1b of naturally occurring prostaglandins and analogs.     

Synthesis of 15N-enriched pseudouridine derivatives

[reaction: see text]. A procedure for the chemical synthesis of [3-15N]-labeled pseudouridine and a methylated derivative was developed. A suitably protected pseudouridine precursor was nitrated at N3 followed by treatment with 15NH4Cl to afford the 15N-labeled product in six steps with a 20% yield. This methodology will allow for the production of RNAs with [3-15N]pseudouridine and [3-15N-methyl]pseudouridine at specific locations.     

Binding and condensation of plasmid DNA onto functionalized carbon nanotubes: toward the construction of nanotube-based gene delivery vectors

Carbon nanotubes (CNTs) constitute a class of nanomaterials that possess characteristics suitable for a variety of possible applications. Their compatibility with aqueous environments has been made possible by the chemical functionalization of their surface, allowing for exploration of their interactions with biological components including mammalian cells. Functionalized CNTs (f-CNTs) are being intensively explored in advanced biotechnological applications ranging from molecular biosensors to cellular growth substrates. We have been exploring the potential of f-CNTs as delivery vehicles of biologically active molecules in view of possible biomedical applications, including vaccination and gene delivery. Recently we reported the capability of ammonium-functionalized single-walled CNTs to penetrate human and murine cells and facilitate the delivery of plasmid DNA leading to expression of marker genes. To optimize f-CNTs as gene delivery vehicles, it is essential to characterize their interactions with DNA. In the present report, we study the interactions of three types of f-CNTs, ammonium-functionalized single-walled and multiwalled carbon nanotubes (SWNT-NH3+; MWNT-NH3+), and lysine-functionalized single-walled carbon nanotubes (SWNT-Lys-NH3+), with plasmid DNA. Nanotube-DNA complexes were analyzed by scanning electron microscopy, surface plasmon resonance, PicoGreen dye exclusion, and agarose gel shift assay. The results indicate that all three types of cationic carbon nanotubes are able to condense DNA to varying degrees, indicating that both nanotube surface area and charge density are critical parameters that determine the interaction and electrostatic complex formation between f-CNTs with DNA. All three different f-CNT types in this study exhibited upregulation of marker gene expression over naked DNA using a mammalian (human) cell line. Differences in the levels of gene expression were correlated with the structural and biophysical data obtained for the f-CNT:DNA complexes to suggest that large surface area leading to very efficient DNA condensation is not necessary for effective gene transfer. However, it will require further investigation to determine whether the degree of binding and tight association between DNA and nanotubes is a desirable trait to increase gene expression efficiency in vitro or in vivo. This study constitutes the first thorough investigation into the physicochemical interactions between cationic functionalized carbon nanotubes and DNA toward construction of carbon nanotube-based gene transfer vector systems.     

Synthesis of helix 69 of Escherichia coli 23S rRNA containing its natural modified nucleosides,m(3)Psi and Psi

The synthesis of 3-methylpseudouridine (m(3)Psi) phosphoramidite, 5'-O-[benzhydryloxybis(trimethylsilyloxy)silyl]-2'-O-[bis(2-acetoxyethoxy)methyl]-3-methylpseudouridine-3'-(methyl-N,N-diisopropyl)phosphoramidite, is reported. Selective pivaloyloxymethyl protection of the Psi N1 followed by methylation at N3 was used to generate the naturally occurring pseudouridine analogue. The m(3)Psi phosphoramidite was used in combination with pseudouridine (Psi) and standard base phosphoramidites to synthesize a 19-nucleotide RNA representing helix 69 of Escherichia coli 23S ribosomal RNA (rRNA) (residues 1906-1924), containing a single m(3)Psi at position 1915 and two Psi's at positions 1911 and 1917. Our synthesis of the fully modified helix 69 RNA demonstrates the ability to make milligram quantities of RNA that can be used for further high-resolution structure studies. Site-selective introduction of the methyl group at the N3 position of pseudouridine at position 1915 causes a slight increase in the thermodynamic stability of the RNA hairpin relative to pseudouridine; RNAs containing either uridine or 3-methyluridine at position 1915 have similar stability. One-dimensional imino proton NMR and circular dichroism spectra of the modified RNAs reveal that the methyl group does not cause any substantial changes in the RNA hairpin structure.     

The Williamson Reaction: A New and Efficient Method for the Alternate Resolution of 2,2'-Bis(bromomethyl)-1,1'-binaphthyl and 1,1'-Binaphthalene-2,2'-diol

Treatment of 2,2'-bis(bromomethyl)-1,1'-binaphthyl [(R,S)-2] with 1,1'-binaphthalene-2,2'-diol (+)-(R)-1 and cesium or potassium carbonate in refluxing acetone, gave the diastereoisomeric dioxacyclophanes (-)-(R,S)-3a and (+)-(R,R)-3b, both obtained in high yield, and the cyclic tetraether (+)-(R,R,R,S)-4 as isolated side product. Boron tribomide-promoted ether cleavage of 3a and 3b gave optically pure (-)-(S)-2 and (+)-(R)-2, respectively, and the recovered diol (+)-(R)-1. Alternatively, the same reaction sequence furnished the resolved diols (-)-(S)-1 and (+)-(R)-1 from (R,S)-1 and (+)-(R)-2, as well as optically pure 2,2'-bis(chloromethyl)-1,1'-binaphthyl (+)-(R)-5 from the racemic dibromide (R,S)-2 by using boron trichloride for ether cleavage.     

Mixed-valence, mixed-spin-state, and heterometallic [2x2] grid-type arrays based on heteroditopic hydrazone ligands: synthesis and electrochemical features

An extended family of heterometallic [(M1)2(M2)2(L-)4](n+) [2x2] grid-type arrays 1-9 has been prepared. The three-tiered synthetic route encompasses regioselective, redox and enantioselective features and is based on the stepwise construction of heteroditopic hydrazone ligands A-C. These ligands contain ionisable NH and nonionisable NMe hydrazone units, which allows the metal redox properties to be controlled according to the charge on the ligand binding pocket. The 2-pyrimidine (R) and 6-pyridine (R') substituents have a significant effect on complex geometry and influence both the electrochemical and magnetic behaviour of the system. 1H NMR spectroscopic studies show that the Fe(II) ions in the grid can be low spin, high spin or spin crossover depending on the steric effect of substituents R and R'. This steric effect has been manipulated to construct an unusual array possessing two low-spin and two spin-crossover Fe(II) centres (grid 8). Electrochemical studies were performed for the grid-type arrays 1-9 and their respective mononuclear precursor complexes 10-13. The grids function as electron reservoirs and display up to eight monoelectronic, reversible reduction steps. These processes generally occur in pairs and are assigned to ligand-based reductions and to the Co(III)/Co(II) redox couple. Individual metal ions in the heterometallic grid motif can be selectively addressed electrochemically (e.g., either the Co(III) or Fe(II) ions can be targeted in grids 2 and 5). The Fe(II) oxidation potential is governed by the charge on the ligand binding unit, rather than the spin state, thus permitting facile electrochemical discrimination between the two types of Fe(II) centre in 7 or in 8. Such multistable heterometallic [2x2] gridlike arrays are of great interest for future supramolecular devices incorporating multilevel redox activity.     

Synthesis, linear, and quadratic-nonlinear optical properties of octupolar D3 and D2d bipyridyl metal complexes

A series of D3 (Fe(II), Ru(II), Zn(II), Hg(II)) and D2d (Cu(I), Ag(I), Zn(II)) octupolar metal complexes featuring different functionalized bipyridyl ligands has been synthesized, and their thermal, linear (absorption and emission), and nonlinear optical (NLO) properties were determined. Their quadratic NLO susceptibilities were determined by harmonic light scattering at 1.91 microm, and the molecular hyperpolarizability (beta0) values are in the range of 200-657 x 10(-30) esu for octahedral complexes and 70-157 x 10(-30) esu for tetrahedral complexes. The octahedral zinc(II) complex 1 e, which contains a 4,4'-oligophenylenevinylene-functionalized 2,2'-bipyridine, exhibits the highest quadratic hyperpolarizability ever reported for an octupolar derivative (lambdamax=482 nm, beta1.91(1 e)=870 x 10(-30) esu, beta0(1 e)=657 x 10(-30) esu). Herein, we demonstrate that the optical and nonlinear optical (NLO) properties are strongly influenced by the symmetry of the complexes, the nature of the ligands (donor endgroups and pi linkers), and the nature of the metallic centers. For example, the length of the pi-conjugated backbone, the Lewis acidity of the metal ion, and the increase of ligand-to-metal ratio result in a substantial enhancement of beta. The contribution of the metal-to-ligand (MLCT) transition to the molecular hyperpolarizability is also discussed with respect to octahedral d6 complexes (M=Fe, Ru).