Intramolecular cyclopropanation of unsaturated terminal epoxides and chlorohydrins

Lithium 2,2,6,6-tetramethylpiperidide (LTMP)-induced intramolecular cyclopropanation of unsaturated terminal epoxides provides an efficient and completely stereoselective entry to bicyclo[3.1.0]hexan-2-ols and bicyclo[4.1.0]heptan-2-ols. Further elaboration of C-5 and C-6 stannyl-substituted bicyclo[3.1.0]hexan-2-ols via Sn-Li exchange/electrophile trapping or Stille coupling generates a range of substituted bicyclic cyclopropanes. An alternative straightforward cyclopropanation protocol using a catalytic amount of 2,2,6,6-tetramethylpiperidine (TMP) allows for a convenient (1 g-7.5 kg) synthesis of bicyclo[3.1.0]hexan-2-ol and other bicyclic adducts. The synthetic utility of this chemistry has been demonstrated in a concise asymmetric synthesis of (+)-beta-cuparenone. The related unsaturated chlorohydrins also undergo intramolecular cyclopropanation via in situ epoxide formation.     

Oxidation of Zn(Cys)4 zinc finger peptides by O2 and H2O2: products, mechanism and kinetics

The reactivity of a series of Zn(Cys)(4) zinc finger model peptides towards H(2)O(2) and O(2) has been investigated. The oxidation products were identified by HPLC and ESI-MS analysis. At pH<7.5, the zinc complexes and the free peptides are oxidised to bis-disulfide-containing peptides. Above pH 7.5, the oxidation of the zinc complexes by H(2)O(2) also yields sulfinate- and sulfonate-containing overoxidised peptides. At pH 7.0, monitoring of the reactions between the zinc complexes and H(2)O(2) by HPLC revealed the sequential formation of two disulfides. Several techniques for the determination of the rate constant for the first oxidation step corresponding to the attack of H(2)O(2) by the Zn(Cys)(4) site have been compared. This rate constant can be reliably determined by monitoring the oxidation by HPLC, fluorescence, circular dichroism or absorption spectroscopy in the presence of excess ethyleneglycol bis(2-aminoethyl ether)tetraacetic acid. In contrast, monitoring of the release of zinc with 4-(2-pyridylazo)resorcinol or of the thiol content with 5,5'-dithiobis(2-nitrobenzoate) did not yield reliable values of this rate constant for the case in which the formation of the second disulfide is slower than the formation of the first. The kinetic measurements clearly evidence a protective effect of zinc on the oxidation of the cysteines by both H(2)O(2) and O(2), which points to the fact that zinc binding diminishes the nucleophilicity of the thiolates. In addition, the reaction between the zinc finger and H(2)O(2) is too slow to consider zinc fingers as potential sensors for H(2)O(2) in cells.     

钴掺杂Sr1.5La0.5MnO4的合成及高温电化学性能研究

采用EDTA-柠檬酸法合成了中温固体氧化物燃料电池阴极材料Sr_1.5La_0.5Mn_1-xCo_xO₄（SLMCO_x）,并利用粉末X射线衍射（XRD）、X射线光电子能谱（XPS）以及电化学交流阻抗谱（EIS）进行表征。结果表明,该材料与Ce_0.9Gd_0.1O_1.95（CGO）在1 200℃烧结12 h不发生化学反应。随着Co掺入量的增加,氧化物中Mn³⁺和Co²⁺含量增多,晶格氧含量降低,晶格畸变率增大。交流阻抗谱（EIS）测试结果显示,钴的掺杂明显降低电极的极化电阻,其中Sr_1.5La_0.5Mn_0.7Co_0.3O₄阴极在700℃空气中的极化电阻为0.62 Ω·cm²,明显小于Sr_1.5La_0.5MnO₄阴极在750℃的极化电阻（1.5 Ω·cm²）,表明钴掺杂的Sr_1.5La_0.5Mn_1-xCo_xO₄是一种潜在的IT-SOFC阴极材料。     

钴掺杂Sr1.5La0.5MnO4的合成及高温电化学性能研究

采用EDTA-柠檬酸法合成了中温固体氧化物燃料电池阴极材料Sr_(1.5)La_(0.5)Mn_(1-x)Co_xO_4(SLMCOx),并利用粉末X射线衍射(XRD)、X射线光电子能谱(XPS)以及电化学交流阻抗谱(EIS)进行表征。结果表明,该材料与Ce0.9Gd0.1O1.95(CGO)在1 200℃烧结12 h不发生化学反应。随着Co掺入量的增加,氧化物中Mn~(3+)和Co~(2+)含量增多,晶格氧含量降低,晶格畸变率增大。交流阻抗谱(EIS)测试结果显示,钴的掺杂明显降低电极的极化电阻,其中Sr_(1.5)La_(0.5)Mn_(0.7)Co_(0.3)O_4阴极在700℃空气中的极化电阻为0.62Ω·cm~2,明显小于Sr_(1.5)La_(0.5)MnO_4阴极在750℃的极化电阻(1.5Ω·cm~2),表明钴掺杂的Sr_(1.5)La_(0.5)Mn_(1-x)CoxO_4是一种潜在的IT-SOFC阴极材料。     

Catalytic Intramolecular Palladium-Ene Reactions. Preliminay Communication

Pd(dba)₂[dba = dibenzylideneacetone]/PPh₃-or Pd(PPh₃)₄-catalyzed cyclizations of acetoxy-dienes 2 → 3 and 10 → 11 gave 1-vinyl-2-methylidene-subsituted cyclopentances and cyclohexanes in high yield, consistent with a palladium-ene/β-elimination mechanism ( D → E → F , Scheme 2). The efficient and highly stereoselective cyclizations 7 → 7 and 8 → 9 illustrate intramolecular allylpalladium insertions into 1,2-dialkyl-, trialkyl-, trialkyl-, and cyclic alkenes followed by elimination of the exocyclic β–H giving 1,2-divinylcyclopentanes. These new olefin insertions proceed faster in AcOH (compared to THF) and occur preferentially cis relative to the Pd ( 13 → 14 → 15 ).     

Strong ion-exchange centrifugal partition chromatography as an efficient method for the large-scale purification of glucosinolates

The glucosinolates sinalbin and glucoraphanin were purified by strong ion-exchange displacement centrifugal partition chromatography (SIXCPC). The optimized conditions involved the biphasic solvent system ethyl acetate/n-butanol/water (3:2:5, v/v), the lipophilic anion-exchanger Aliquat 336 (trioctylmethylammonium chloride, 160 and 408 mM) and a sodium iodide solution (80 and 272 mM) as displacer. Amounts as high as 2.4 g of sinalbin and 2.6g of glucoraphanin were obtained in one step in 2.5 and 3.5h respectively, starting from 12 and 25 g of mustard and broccoli seed aqueous extracts, using a laboratory scale CPC column (200 mL inner volume).     

Langmuir-Blodgett films of cellulose nanocrystals: preparation and characterization

The goal of this work is the preparation of monolayers of cellulose I nanocrystals providing flat crystalline cellulose surfaces. Suspensions of cellulose nanocrystals were prepared by hydrolyzing ramie and tunicin fibers with sulfuric acid. Due to surface grafted sulfate groups, the negatively charged, rod-like cellulose nanocrystals were found to form stable layers at the air-water interface in the presence of a cationic amphiphilic molecule such as dioctadecyldimethylammonium (DODA) used in this work. These layers were formed at different cellulose-DODA weight ratios, compressed and analyzed by tensiometry, ellipsometry and Brewster angle microscopy. At low cellulose concentrations the layers are discontinuous, becoming dense and homogeneous upon reaching a critical weight ratio, which depends on the aspect ratio of the cellulose nanocrystals. After transfer onto silicon wafers, the surface composition and morphology as well as the thickness of the films were examined by X-ray photoelectron spectroscopy, ellipsometry and atomic force microscopy. The results indicate that they are monolayer films, well structured, relatively smooth and pure. These films offer a crystalline and easily reproducible model cellulose surface.     

Model-independent constraints on spin observables

We discuss model-independent constraints on spin observables in exclusive and inclusive reactions, with special attention to the case of photoproduction.     

Large displacement analysis of shear deformable composite beams with interlayer slips

This paper presents a novel geometric non-linear finite element formulation for the analysis of shear deformable two-layer beams with interlayer slips. We adopt the co-rotational approach where the motion of the element is decomposed into two parts: a rigid body motion which defines a local coordinate system and a small deformational motion of the element relative to this local coordinate system. The main advantage of this approach is that the transformation matrices relating local and global quantities are independent to the choice of the geometrical linear local element. The effect of transverse shear deformation of the layers is taken into account by assuming that each layer behaves as a Timoshenko beam element. The layers are assumed to be continuously connected and partial interaction is considered by considering a continuous relationship between the interface shear flow and the corresponding slip. In order to avoid curvature and shear locking phenomena, the local linear element is formulated using “exact” displacement shape functions derived from the closed-form solution of the governing equations of a two-layer beam element. Finally, three numerical applications are presented in order to assess the performance of the proposed formulation.