Wavefront sensing issues in MCAO

The problematic of wavefront sensing in Multiconjugate Adaptive Optics (MCAO) is addressed in this article. We first focus on the sky coverage estimation which drives, in particular, the choice between natural and laser guide stars and therefore has a major impact on wavefront sensor design. Then a comparison between star oriented and layer oriented concepts is proposed. Analytical developments and optimization of the concepts are derived in the simplest MCAO case: the ground layer AO system. From this study, advantages and drawbacks of each concept are highlighted. To cite this article: T. Fusco et al., C. R. Physique 6 (2005).     

First steps toward spatially resolved OSL dating with electron multiplying charge-coupled devices (EMCCDs): System design and image analysis

Spatially resolved OSL (SR-OSL) measurements are made with a scanning or imaging system that records luminescence emissions from known sources within a sample. This work is a first step toward the development of an SR-OSL methodology based on the imaging of ultraviolet OSL emissions with an EMCCD camera. We present UV OSL images of natural quartz extracts, OSL/TL/IR images of sandstone, image-based OSL measurements from aluminum oxide grains, and dose recovery experiments on aluminum oxide and Risø calibration quartz. Camera sensitivity and quantitative reproducibility indicate that EMCCD-based OSL dating is feasible. Further experimentation is necessary to adequately define the error sources and measurement limitations of EMCCDs in the OSL regime.     

Preussianone, a new flavanone-chromone biflavonoid from Garcinia preussii Engl

A new flavanone-chromone biflavonoid, preussianone (1), has been isolated from the leaves of Garcinia preussii, along with four known biflavonoids. The absolute stereostructures were elucidated by chemical, spectroscopic, and chiroptical methods. The biological properties of the new biflavonoid against several bacterial strains were evaluated.     

Photoinduced Damage to Cellular DNA: Direct and Photosensitized Reactions(†)

The survey focuses on recent aspects of photochemical reactions to cellular DNA that are implicated through the predominant formation of mostly bipyrimidine photoproducts in deleterious effects of human exposure to sunlight. Recent developments in analytical methods have allowed accurate and quantitative measurements of the main DNA photoproducts in cells and human skin. Highly mutagenic CC and CT bipyrimidine photoproducts, including cyclobutane pyrimidine dimers and pyrimidine (6-4) pyrimidone photoproducts (6-4PPs) are generated in low yields with respect to TT and TC photoproducts. Another striking finding deals with the formation of Dewar valence isomers, the third class of bipyrimidine photoproducts that is accounted for by UVA-mediated isomerization of initially UVB generated 6-4PPs. Cyclobutadithymine (T<>T) has been unambiguously shown to be involved in the genotoxicity of UVA radiation. Thus, T<>T is formed in UVA-irradiated cellular DNA according to a direct excitation mechanism with a higher efficiency than oxidatively generated DNA damage that arises mostly through the Type II photosensitization mechanism. C<>C and C<>T are repaired at rates intermediate between those of T<>T and 6-4TT. Evidence has been also provided for the occurrence of photosensitized reactions mediated by exogenous agents that act either in an independent way or through photodynamic effects.     

Effectiveness of multilayer viscoelastic insulators to prevent occurrences of brake squeal: A numerical study

The purpose of this publication is to give an overview of the actual role of multi-layered viscoelastic parts, so called “shims”, to prevent squeal noises of automotive brake systems. Since shear stress is usually used to damp thin structures in their bending modes it is commonly believed to be the largest underwent by shims. To check this assumption and considering that stresses underwent by shims cannot be measured experimentally, the authors have computed them with the help of a detailed and realistic finite element model. Contrary to what shims manufacturers say, this study exhibits the fact that shims are almost uniquely solicited in their normal direction in brake systems. Secondly, the study focuses on the added damping and stiffening induced by the viscoelastic materials. In order to take into account these materials, a realistic frequency dependent viscoelastic behavior has been integrated in the simulations. Finally, the study shows certains eigenmodes for which the viscoelastic behavior of the shims reveals instabilities that would not exist without it. It is shown that this is due to coalescence phenomenon.     

Surface free energy of films of alkali-treated cellulose microfibrils from banana rachis

Cellulose microfibrils extracted by various alkaline treatments of vascular bundles from banana rachis were used to elaborate films. The films were comparatively studied to determine changes in polarity induced by various treatments. Atomic force microscopy was used to characterize the surface morphology of the films and transmission electron microscopy was employed to characterize the microfibrils used to elaborate the films. Contact angles were measured to determine surface free energy (SFE) and thermogravimetric analyses were carried out to determine changes in composition of the films. The results showed that the films of cellulose microfibrils prepared by the peroxide alkaline (PA) and peroxide alkaline-hydrochloric acid (PA-HCl) treatments had lower content of non-cellulosic constituents like xylose and had lower SFE than films of microfibrils treated with KOH-5. Furthermore, specimens treated with the most concentrated KOH solution (18 wt%) and sodium chloride presented the highest SFE and polar component.     

Synthesis of a New Bivalent Hirudin Analog (hirufos), which includes a stable 4′-phosphono-L-phenylalanine mimic of (L-tyrosine O4-sulfate)-63

The synthesis on solid phase of a new derivative of the anticoagulant protein hirudin is described (see Scheme and Fig.1, I ). The henicosapeptide is a bivalent conjugate of the C-terminus of hirudin and of the active-site-binding tetrapeptide D -Phe-Pro-Arg-Pro linked via a tetraglycine spacer. The peptide, for which the name hirufos was coined, incorporates a stable phosphono derivative of L -phenylalanine which, combined with the other structural modifications, leads to a potent anticoagulant agent. Synthesis was readily achieved by the (9H-fluoren-9-yl)-methoxycarbonyl (Fmoc) strategy followed by acidolytic cleavage from the resin and deprotection, including the liberation of the crucial phosphonic group on L -phenylalanine.     

Isolation of C-glycosyl xanthones from Coffea pseudozanguebariae and their location

The biochemical composition of leaves from Coffea pseudozanguebariae, a wild caffeine-free coffee species, was determined. Two phenolic compounds were extracted from leaves, separated and characterized. Their structures were elucidated by mass spectrometry, and 1D and 2D NMR spectroscopy and were shown to be mangiferin (1) and isomangiferin (2), which were the main polyphenol products. Multiphoton fluorescence imaging was performed to visualize polyphenol distribution in leaf cross sections. Consistent biochemical analysis cell imaging techniques on leaves revealed yellow fluorescence in the epidermis and parenchyma cells corresponding to xanthone compounds.     

Evaluation of solid-phase microextraction desorption parameters for fast GC analysis of cocaine in coca leaves

By its simplicity and rapidity, solid-phase microextraction (SPME) appears as an interesting alternative for sample introduction in fast gas chromatography (fast GC). This combination depends on numerous parameters affecting the desorption step (i.e., the release of compounds from the SPME fiber coating to the GC column). In this study, different liner diameters, injection temperatures, and gas flow rates are evaluated to accelerate the thermal desorption process in the injection port. This process is followed with real-time direct coupling a split/splitless injector to a mass spectrometer by means of a short capillary. It is shown that an effective, quantitative, and rapid transfer of cocaine (COC) and cocaethylene (CE) is performed with a 0.75-mm i.d. liner, at 280 degrees C and 4 mL/min gas flow rate. The 7-microm polydimethylsiloxane (PDMS) coating is selected for combination with fast GC because the 100-microm PDMS fiber presents some limitations caused by fiber bleeding. Finally, the developed SPME-fast GC method is applied to perform in less than 5 min, the quantitation of COC extracted from coca leaves by focused microwave-assisted extraction. An amount of 7.6 +/- 0.5 mg of COC per gram of dry mass is found, which is in good agreement with previously published results.