Comparative study of recent wide-pore materials of different stationary phase morphology, applied for the reversed-phase analysis of recombinant monoclonal antibodies

Various recent wide-pore reversed-phase stationary phases were studied for the analysis of intact monoclonal antibodies (mAbs) of 150 kDa and their fragments possessing sizes between 25 and 50 kDa. Different types of column technology were evaluated, namely, a prototype silica-based inorganic monolith containing mesopores of ～250 Å and macropores of ～?1.1 μm, a column packed with 3.6 μm wide-pore core-shell particles possessing a wide pore size distribution with an average around 200 Å and a column packed with fully porous 1.7 μm particles having pore size of ～300 Å. The performance of these wide-pore materials was compared with that of a poly(styrene–divinyl benzene) organic monolithic column, with a macropore size of approximately 1 μm but without mesopores (stagnant pores). A systematic investigation was carried out using model IgG1 and IgG2 mAbs, namely rituximab, panitumumab, and bevacizumab. Firstly, the recoveries of intact and reduced mAbs were compared on the two monolithic phases, and it appeared that adsorption was less pronounced on the organic monolith, probably due to the difference in chemistry (C18 versus phenyl) and the absence of mesopores (stagnant zones). Secondly, the kinetic performance was investigated in gradient elution mode for all columns. For this purpose, peak capacities per meter as well as peak capacities per time unit and per pressure unit (PPT) were calculated at various flow rates, to compare performance of columns with different dimensions. In terms of peak capacity per meter, the core-shell 3.6 μm and fully porous 1.7 μm columns outperformed the two monolithic phases, at a temperature of 60 °C. However, when considering the PPT values, the core-shell 3.6 μm column remained the best phase while the prototype silica-based monoliths became very interesting, mostly due to a very high permeability compared with the organic monolith. Therefore, these core-shell and silica-based monolith provided the fastest achievable separation. Finally, at the maximal working temperature of each column, the core-shell 3.6 μm column was far better than the other one, because it is the only one stable up to 90 °C. Lastly, the loading capacity was also measured on these four different phases. It appeared that the organic monolith was the less interesting and rapidly overloaded, due to the absence of mesopores. On the other hand, the loading capacity of prototype silica-based monolith was indeed reasonable.     

Photo- and thermal-oxidation of polyethylene: Comparison of mechanisms and influence of unsaturation content

The behaviour of polyethylene with different contents in vinyl and t-vinylene groups have been studied by photooxidation with λ ≥ 300 nm light or by thermooxidation at a temperature of 100 °C. The oxidation was studied by infrared spectroscopy and it was shown that the same oxidation products were obtained, but with different relative concentrations depending on the conditions of ageing, i.e. photochemical or thermal conditions. The mechanisms by which the oxidation products are formed were recalled. The differences between photo- and thermo-oxidation were evidenced on the basis of the stability of ketones that do not accumulate in photochemical conditions, as a result of Norrish reactions. The influence of the initial amount of unsaturated groups on the rates of oxidation was characterized. It was shown that the concentration of unsaturations had no effect on the rate of photooxidation but dramatically influenced the stability in thermooxidative conditions.     

On the construction of 2-substituted 1,4-diacetoxybutadiene moiety: application to the synthesis of (±)-caulerpenyne

The synthesis of 2-substituted 1,4-diacetoxybutadiene derivatives with a partial control of stereochemistry is described from two potentially precursor enals by a judicious choice of experimental conditions (Ac₂O/DMAP in Et₃N). These conditions have been successfully applied in the first total synthesis of caulerpenyne.     

Solid-State 13C-NMR spectral evidence for charge transfer complex formation in aromatic diimides and dianhydrides

Solution and solid-state proton decoupled ¹³C-NMR spectra were determined on two diimides derived from 4, 4′-oxydiphthalic anhydride. Comparison of the individual diimide spectra to that of a mixture of the two diimides indicates that ordering of these materials occurs in the solid state via charge transfer complex formation. A similar study was conducted using two isomeric dianhydrides, 4, 4′-isophthaloyldiphthalic anhydride (IDPA) and 4, 4′-terephthaloyldiphthalic anhydride (TDPA). The solution spectra of these compounds are similar and are those which would be expected for these compounds. However, their solid state spectra differ from each other. The solid-state spectrum of TDPA resembles its solution spectrum, whereas, that of IDPA differs greatly from its solution spectrum and indicates charge transfer complex formation occurs with this molecule. This difference is explained in terms of the stereochemistry of the two isomeric dianhydrides.     

Nitrogen bridgehead compounds. Part 70. Studies on quinolizine derivatives. Part 4. Ultraviolet-visible spectra and chemical properties of some quinolizine derivatives and their monocyclic tautomers

Ultraviolet-visible spectra of 4-oxo 1 and 4-imino 2 quinolizines or their monocyclic tautomers 3, 4 have been studied in neutral, acidic and basic ethanolic solution as well as in dimethyl sulfoxide and chloroform. Ring B of 4-oxo and 6-unsubstituted 4-imino compounds can be cleaved by sodium ethanolate more or less easily. Ring B of 6-methyl-4-iminoquinolizines is very unstable and they are present mainly in the monocyclic form which are partly dissociated in ethanol and dimethyl sulfoxide especially in higher dilution or in the presence of sodium ethanolate. In dilute acidic ethanol or chloroform, the dissociation is suppressed and in the latter solvent and in some cases, absorption bands can be observed due to a small amount of the 4-imino-6-methylquinolizines. In acidic solution of compounds 3B=C, 3D, 4E, 4F=G having simultaneously cyano and ethoxycarbonyl groups in 1 and 3 position, not simple reprotonation occurs but irreversible changes can be observed.     

Cloud-Enabled Handheld NIR Spectroscopy: A Transformative Approach for Real-Time Forensic Analysis of Cannabis Specimens

In the past few years, there has been significant interest within the forensic community regarding the deployment of portable solutions that provide real-time results. This article introduces an innovative technology or technology architecture that enables the integration of a handheld device, specifically, Viavi MicroNIR, with a cloud-based system. This cloud system encompasses a server responsible for data processing and a mobile application acting as a user interface. To demonstrate the transformative impact of this technology on field operators, the analysis of cannabis specimens has been utilized. System's capacity to distinguish between CBD-type and THC-type cannabis has been particularly highlighted, along with the remarkable congruence observed between the near-infrared (NIR) spectra and the reference analytical method involving ultra-high-performance liquid chromatography (UHPLC) The article will present the advantages of this application primarily focusing on its potential to alleviate the burden on laboratories by expediting routine illicit drug analysis. Viavi MicroNIR technology provides laboratory personnel with additional time to handle more complex cases, thereby enhancing overall efficiency.     

Complexes of tri- and tetra-protonated forms of 1,4,8,12-tetraazacyclopentadecane with chloride,nitrate, iodate,and sulfate ions in aqueous media: II. Analysis of the underlying experimental and theoretical assumptions

In a previous paper [1] the complexation behavior of 1,4,8,12-tetraazacyclopentadecane with various anions was studied. This analysis depended on various assumptions involving the accuracy and the interpretation of the experimental data. In this paper these assumptions are examined using pH potentiometry,¹³C NMR, and conductometric techniques. The validity of each of the assumptions was confirmed.