Fullerodendrimers with peripheral triethyleneglycol chains

Triethylene glycol terminated poly(aryl ether) dendritic branches with an aldehyde function at the focal point have been prepared and attached to C₆₀ by a 1,3-dipolar cycloaddition.     

Production of large quantities of “Janus” nanoparticles using wax-in-water emulsions

For the first time, large amount of Janus silica particles as small as 100 nm in diameter were prepared through a simple method based on the elaboration of Pickering emulsions of wax-in-water. Controlling the kinetic stabilization of wax droplets allows the fabrication of gram-sized quantities of regular asymmetric inorganic particles with high yield. In fact, our method is based on a limited coalescence process, which allows one to predict the quantity of interface which is produced when working with a known mass of wax, and thus to be sure that all introduced silica particles are adsorbed on the wax surface. To this end, the hydrophilic surface of the silica particles was made partially hydrophobic by adsorbing a known amount of surfactant: cetyltrimethylammonium bromide (CTAB). Varying the concentration in surfactant results in tuning the penetration rate of the particles in the wax droplets, leading to various dimension of the modified area. The broken spherical symmetry of the particle surface was thereafter revealed by the selective adsorption of gold nanoparticles on the amino-modified surface.     

Zur Unterscheidung von prim?ren, sekund?ren und terti?ren Aminen

Ohne Zusammenfassung     

The design and testing of kinetically-appropriate operando spectroscopic cells for investigating heterogeneous catalytic reactions

This tutorial review discusses some of the current designs of reaction cells used for operando spectroscopy (X-ray absorption, UV-vis, Raman, transmission FTIR and DRIFTS) and the relation to the apparent reaction kinetics. Beam effects, the control of the catalyst bed temperature and bed by-pass are some of the potential problems that may lead to flawed activity measurements. Finally, four examples are given in which a good agreement was obtained between the activity of a powdered catalyst measured in a conventional reactor and in a spectroscopic cell. It is proposed that such comparison between reactors should become a standard procedure, to ensure the correctness of the data collected over typically non-ideal spectroscopic reaction cells.     

Light-induced degradation of the active layer of polymer-based solar cells

Polymer-based organic solar cells are known to offer a poor stability in real use conditions, and the photodegradation of the active organic layer plays an important role in the reduced lifetime of the devices. This paper focuses on the photodegradation of two conjugated polymers used in organic solar cells, namely poly(2-methoxy-5-(3′,7′-dimethyloctyloxy)-1,4-phenylenevinylene (MDMO-PPV) and poly(3-hexyylthiophene) (P3HT), and their blends with [60]PCBM (methano-fullerene[6,6]-phenyl C61-butyric acid methyl ester), a fullerene derivative. MDMO-PPV and P3HT thin films were submitted to photoageing (λ > 300 nm) in the presence and in the absence of oxygen. The mechanisms by which these polymers degrade were elucidated. P3HT, pristine and blended with PCBM, was shown to be much more stable under illumination than MDMO-PPV. The results showed that, if deposited on an inert substrate and well protected from oxygen with a convenient encapsulation, P3HT:PCBM based active layer should be intrinsically stable for several years in use conditions.     

Selection of suitable operating conditions to minimize the gradient equilibration time in the separation of drugs by Ultra-High-Pressure Liquid Chromatography with volatile (mass spectrometry-compatible) buffers

Reversed phase gradient elution is the method of choice for pharmaceuticals analysis since it allows reducing the analysis time while improving both the quality of the separation and the detection limits. The current trends are towards faster separations which can be achieved thanks to equipments withstanding ultra-high pressures and/or high temperatures. Under such conditions, gradient separations can be carried out within a few minutes or even a few tens of seconds. A long equilibration time in addition to the gradient time can be therefore very detrimental. In this work, we investigated the extent to which the gradient equilibration time can be reduced and which parameters mainly affect the retention variability of ionizable compounds when using volatile buffers. We first found out an excellent repeatability between run-to-run experiments whatever the equilibration time and the operating conditions. We then pointed out the key operating parameters which allow achieving reproducible runs when varying the equilibration time between runs. With a view of reducing the equilibration time, the effects of various conditions were examined. The latter include the type of additive for mobile phase pH adjustment, the initial eluent composition, the type of stationary phase, the temperature and the flow-rate. Although much remains to be understood about the equilibration process, our study allows making progress in the knowledge of this phenomenon. Based on the present results, a beneficial effect of both temperature and flow-rate was highlighted and operating conditions leading to faster column equilibration are suggested.     

Detection of multicomponent signals: effect of difference in level between components

The detection of multicomponent signals for which the components are not equidetectable is precisely investigated as a function of the level difference ΔL(i∕j) between components. The detection thresholds are determined for a seven-tone complex signal with random starting phases masked by white noise. Level differences between the components are examined. A model for non-equidetectable conditions based on the statistical summation model is described. The improvement in detection is calculated from the level difference between components that is related to the thresholds for single components. The model predictions are in accordance with the experimental results.     

Influence of deposition conditions on the optical properties of erbium-doped yttrium oxide films grown by aerosol-UV assisted MOCVD

Erbium-doped Y₂O₃ films were prepared by aerosol-UV assisted metal-organic chemical vapour deposition (MOCVD) at 410 °C. The effects of humidity of carrier gas and UV-assistance on their structure and optical properties were investigated on the as-deposited and thermal annealed films using infrared spectroscopy, X-ray diffraction and transmission electron microscopy. It was found that the as-deposited Er:Y₂O₃ films crystallise in the Y₂O₃ cubic structure and present a very low organic contamination when the deposition takes place under high air humidity and, even better, with UV-assistance. After annealing, two different structural phases are observed corresponding to the cubic and the monoclinic structures of Y₂O₃. The Er³⁺ luminescence analysed in the visible and IR regions, shows the classical green transitions. The best optical properties were obtained with as-deposited and annealed Er:Y₂O₃ films grown under high air humidity with UV-assistance. Under such deposition conditions, ⁴I_13/2 lifetimes was found to be 3.07 and 6.1 ms for films annealed at 800 and 1000 °C, respectively, and up-conversion phenomena were underlined. This indicates that the deposition conditions, in particular air humidity, play an important role in the luminescent properties even after annealing.     

Dynamical selection of the primordial density fluctuation amplitude

In inflationary models, the predicted amplitude of primordial density perturbations Q is much larger than the observed value (～10(-5)) for natural choices of parameters. To explain the requisite exponential fine-tuning, anthropic selection is often invoked, especially in cases where microphysics is expected to produce a complex energy landscape. By contrast, we find examples of ekpyrotic models based on heterotic M theory for which dynamical selection naturally favors the observed value of Q.     

Perfect extinction in subwavelength dual metallic transmitting gratings

We investigate the strong electromagnetic coupling that settles in dual metallic grating structures. This coupling is evidenced to lead to a perfect optical extinction in the transmission spectrum. The behavior of this perfect extinction that strongly depends on the longitudinal space and the lateral displacement between the two gratings can be explained by a simple model that describes the interference between a propagating mode and a couple of evanescent modes. The results show that the electromagnetic transmission of the structure can be tuned by controlling the position of this perfect transmission extinction and thus pave the way to new types of infrared tunable filters.