Electron-sponge behavior and electronic structures in cobalt-centered pentagonal prismatic Co11Te7(CO)10 and Co11Te5(CO)15 cluster anions

The novel cluster anion [Co(11)Te(5)(CO)15]- ([3]-) has been isolated and structurally characterized as part of the salt [Cp*(2)Nb(CO)2][3] (Cp* = C(5)Me(5)). The cobalt-centered Co10 pentagonal prism is surrounded by a shell of two mu5-Te, three mu4-Te ligands, and 15 CO groups in terminal, symmetrical, and sigma-semibridging bonding modes. The hybrid carbonyl-telluride character of the ligand shell is reflected in the solid state by a one-dimensional assembly of polyhedral prisms along a backbone of [Cp*(2)Nb(CO)2]+ cations. Electrochemical studies reveal the presence of four redox couples of [3]n (n = -1 to -5). The electronic structures of various metal-centered and empty pentagonal-prismatic (PP) M10 clusters (M = Co, Ni) are calculated and compared to those of pentagonal-antiprismatic (PA) M10 structures. Closed-shells of 152 and 156 metal valence electrons, respectively, are found to determine the electronic structures and chemical properties of these geometries. From these considerations, magnetic properties have been predicted. They have been verified for the [Co(11)Te(7)(CO)10]- cluster anion, which exhibits a singlet-triplet gap of 0.318 kcal/mol.     

Remarkable steric effects and influence of monodentate axial ligands l on the spin-crossover properties of trans-[FeII(N4 ligand)L] complexes

Iron(II) complexes obtained from tetradentate, rigid, linear N4 ligands have been investigated to appraise the influence of steric effects and the impact of trans-coordinated anions on the spin-transition behavior. As expected, the well-designed ligands embrace the metal center, resulting in octahedral iron(II) complexes where the basal plane is fully occupied by the pyridine/pyrazole N4 ligand, while anions or solvent molecules are exclusively axially coordinated. Precursor complexes, namely, [Fe(bpzbpy)(MeOH)2](BF4)2 (where bpzbpy symbolizes the ligand 6,6'-bis(N-pyrazolylmethyl)-2,2'-bipyridine) and [Fe(mbpzbpy)(MeOH)2](BF4)2 (where mbpzbpy symbolizes the ligand 6,6'-bis(3,5-dimethyl-N-pyrazolmethyl)-2,2'-bipyridine), have been used for the in situ preparation of a series of structural analogues via the exchange of the weakly coordinated trans methanol molecules by various anions, such as thiocyanate, selenocyanate, or dicyanamide. The magnetic properties of all seven iron(II) compounds thus obtained have been investigated. Two iron(II) complexes, i.e., [Fe(bpzbpy)(NCS)2] and [Fe(bpzbpy)(NCSe)2], exhibit gradual spin-crossover (SCO) properties typical of isolated mononuclear species with weak cooperative interaction. These two SCO materials have been studied by M?ssbauer spectroscopy, and the light-induced excited spin state trapping effect has been investigated, revealing the possibility to induce the spin-transition both by temperature variation and by light irradiation. A correlation between steric/anion effect and SCO behavior is suggested.     

Toward the description of electrostatic interactions between globular proteins: potential of mean force in the primitive model

Monte Carlo simulations are used to calculate the exact potential of mean force between charged globular proteins in aqueous solution. The aim of the present paper is to study the influence of the ions of the added salt on the effective interaction between these nanoparticles. The charges of the model proteins, either identical or opposite, are either central or distributed on a discrete pattern. Contrarily to Poisson-Boltzmann predictions, attractive, and repulsive direct forces between proteins are not screened similarly. Moreover, it has been shown that the relative orientations of the charge patterns strongly influence salt-mediated interactions. More precisely, for short distances between the proteins, ions enhance the difference of the effective forces between (i) like-charged and oppositely charged proteins, (ii) attractive and repulsive relative orientations of the proteins, which may affect the selectivity of protein/protein recognition. Finally, such results observed with the simplest models are applied to a more elaborate one to demonstrate their generality.     

Supercritical fluid chromatography and two-dimensional supercritical fluid chromatography of polar car lubricant additives with neat CO(2) as mobile phase

Car lubricant additives are added to mineral or synthetic base stocks to improve viscosity and resistance to oxidation of the lubricant and to limit wear of engines. Their total amount in the commercial lubricant varies from a few percents to 20-25%. As they belong to various chemical classes and are added to a very complex medium, the base stock, their detailed chromatographic analysis is very difficult and time consuming as it should involve sample treatment and preparative scale separations in order to simplify the sample. The aim of this work is to determine the feasibility of the separation of low molecular weight lubricant additives using various packed columns with pure CO(2) as a mobile phase to enable implementation of flame ionisation detection as universal detector. This is part of a hypernated system including more sophisticated specific detectors, such as AED, FTIR or MS to obtain detailed structural information of compounds. This paper is devoted to the comparison of some stationary phases supposed to provide hydrocarbon group type separation (silica and normal phase) or separations on alkyl-bonded silica in non-aqueous mode of some selected classes of additives in test mixtures or in base stocks. Adsorption chromatography allows partial separation of additives from the base stocks while the direct elution of test additives can only be obtained on reversed phase supports having a very efficient silanol group protection so the interaction of the more polar compounds is much reduced. A two-dimensional scheme of analysis is also described. It combines adsorption chromatography to separate most of the polar additives from the base stock and alkyl-bonded silica for more detailed separation of the additives. However, overlapping between groups of compounds and the lack of resolution between some additives and the base stock should be addressed by the implementing of selective detectors.     

Development of an absolute quantification method targeting growth hormone biomarkers using liquid chromatography coupled to isotope dilution mass spectrometry

A method to perform absolute quantification of two biomarkers (IGF-1 and IGFBP-3) of growth hormone abuse has been developed. Isotope dilution is used with synthetically labelled peptides as internal standards. Peptide selection and multiple reaction monitoring design are discussed. A simple sample preparation based on the reduction and alkylation of cysteine residues followed by tryptic digestion provides a sufficient digestion of proteins. Serum samples fortified with increasing amounts of target proteins are analysed by liquid chromatography-tandem mass spectrometry (LC-MS/MS) on a triple quadrupole mass spectrometer. Specificity is ensured by the selection of sequences with no homology in BLAST, as well as retention time deviation check, and ion ratio monitoring. Linearity is studied in terms of calibration curves. These curves for IGFBP-3 and IGF-1 are generated with mean slopes of 0.055 and 0.065, intercepts of 0.107 and -0.011, and with coefficients of correlation of 0.95 and 0.98, respectively. These curves result from the addition of proteins to the serum. Risks of variations related to potential matrix effects are therefore reduced, as well as probable variations related to the digestion steps. The working concentration ranges are 4-10 ng/microl for IGFBP-3 and 2-8 ng/microl for IGF-1. Preliminary data regarding repeatability show that relative standard deviations (RSDs) range between 13 and 32% for IGFBP-3 and between 7 and 29% for IGF-1.     

A practical synthesis of alpha-aryl methyl ketones via a transition-metal-free Meerwein arylation

We report herein a simple, scalable, transition-metal-free approach to the synthesis of alpha-aryl methyl ketones from diazonium tetrafluoroborate salts under mild conditions. This methodology uses easily accessible and nontoxic starting material and was applied to the multi-kilogram-scale preparation of 1-(3-bromo-4-methylphenyl)propan-2-one.     

Use of 1,10-phenanthroline in diiron dithiolate derivatives related to the [Fe-Fe] hydrogenase active site

Treatment of [Fe(2)(micro-pdt)(CO)(6)] (pdt = S(CH(2))(3)S) with 1,10-phenanthroline (phen) in refluxing toluene affords the asymmetric complex [Fe(2)(micro-pdt)(CO)(4)(phen)] (1); the protonation of with HBF(4).OEt(2) in CD(2)Cl(2) at 203 K has been monitored by (1)H NMR.     

Unusual spin transition behavior in 2,6-bis((pyrazol-3-yl)-pyridine) iron(II)-bis-oxalato-platinate(II)

[Fe(bpp)2][Pt(ox)2].H2O (with bpp=2,6-bis(pyrazol-3-yl)-pyridine and ox=oxalate) was prepared, and its spin crossover behavior was characterized. The two-step spin transition behavior changes over several cycles. The original behavior is restored when the sample is allowed to relax for a week. Furthermore, the ST exhibits a strong dependence on the heating and cooling rate. Heating the compound at 1 K/min leads to a spin transition with a third step and a second plateau at gammaHS approximately 0.8. Quenching the sample to 77 K also affects the spin transition behavior. The kinetic relaxation is followed after quenching and after light-induced excited spin state trapping experiments.     

Smart Poly(styrene)/Carbon Black Conductive Polymer Composites Films for Styrene Vapour Sensing

Conductive Polymer Composites (CPC) can be used to elaborate sensing elements able to detect solvent vapours at very low concentrations (some ppm). Our experiments have shown that combining atactic PS or syndiotactic PS to five carbon black of different specific surfaces, allows obtaining a wide range of electrical resistances and surface morphologies. The CPC films have been elaborated from solutions by spraying and spin coating, the former being more adequate to design sensitive films with tuneable electrical properties. The larger electrical responses were obtained with an initial resistance close to 10⁴ Ω. Our sensors gave a response for very low styrene concentration (some ppm) increasing as a function of vapour concentration.     

Some properties of the range of super-Brownian motion

We consider a super-Brownian motion X. Its canonical measures can be studied through the path-valued process called the Brownian snake. We obtain the limiting behavior of the volume of the ɛ-neighborhood for the range of the Brownian snake, and as a consequence we derive the analogous result for the range of super-Brownian motion and for the support of the integrated super-Brownian excursion. Then we prove the support of X _t is capacity-equivalent to [0, 1]² in ℝ^d, d≥ 3, and the range of X, as well as the support of the integrated super-Brownian excursion are capacity-equivalent to [0, 1]⁴ in ℝ^d, d≥ 5. Received: 7 April 1998 / Revised version: 2 October 1998