Independence versus indetermination: basis of two canonical clustering criteria

Advances in Data Analysis and Classification - This paper aims at comparing two coupling approaches as basic layers for building clustering criteria, suited for modularizing and clustering very...     

Adsorption and thermal condensation mechanisms of amino acids on oxide supports. 1. Glycine on silica

Glycine was adsorbed on the surface of a well-defined silica from aqueous solutions of variable concentrations and pHs. The adsorbed molecules were characterized using middle-IR and UV-vis-NIR spectroscopies. Except at the lowest pH (2.0), they were predominantly present on the surface as zwitterions. Two successive deposition mechanisms were evidenced with increasing glycine concentration. At low concentrations, glycine is specifically adsorbed on silica surface sites, probably through its NH3+ moiety. The pH dependence suggests that these sites may be silanolate groups (approximately equal to Si-O-). At higher concentrations, specific adsorption sites are saturated and surface-induced precipitation of beta-glycine is observed. The thermal reactivity of adsorbed/deposited glycine was then investigated by thermogravimetric analysis, in situ diffuse reflectance IR spectroscopy, and thermoprogrammed desorption coupled with mass spectrometry. Adsorbed glycine molecules react to form peptide bonds at a temperature considerably lower than that for bulk crystalline alpha-glycine. The main reaction product is the cyclic dimer diketopiperazine, with no evidence of the linear dimer. The activation mechanism is not diffusionally limited; the formation of "surface acyls", previously proposed for related systems, has not been evidenced here. These findings are of relevance for the evaluation of prebiotic peptide synthesis scenarios.     

Fullerohelicates: a new class of fullerene-containing supermolecules

A multicomponent array made of a bis-copper(I) helicate core and two peripheral fullerene subunits has been prepared and electron transfer from the photoexcited Cu(I)-complexed unit to C60 occurs.     

An improved clean-up strategy for simultaneous analysis of polychlorinated dibenzo-p-dioxins (PCDD), polychlorinated dibenzofurans (PCDF), and polychlorinated biphenyls (PCB) in fatty food samples

The study and extension of a simple automated clean-up method for polychlorinated dibenzo-p-dioxins (PCDD) and polychlorinated dibenzofurans (PCDF) to a broad range of polychlorinated biphenyls (PCB) is described. The isolation of seven PCDD, ten PCDF, and three coplanar PCB (cPCB) is extended to eight monoortho substituted PCB and seven so-called "marker PCB" (Aroclor 1260) for fatty food samples. This enables quantification of 35 compounds - including all congeners with a WHO toxic equivalent factor (TEF)--in a single extraction and single purification step. The chromatographic behaviour of mono-ortho PCB and marker PCB on a variety of adsorbents, including basic alumina, has been studied. Partitioning of analytes through multi-column sequences is described and correlated with their structural and electronic properties, by use of molecular modelling calculations. The fractionation process available with the Power-Prep automated clean-up system enables rapid independent analysis of the different groups of compounds. Gas chromatography with high resolution mass spectrometry (GC-HRMS) is used for the PCDD/F and cPCB fraction and quadrupole ion-storage tandem in time mass spectrometry (GC-QISTMS) for analysis of the remaining PCB. A comparison study was performed on quality-control samples and real fatty food samples to evaluate the robustness of the new strategy compared with a reference method. On the basis of this simultaneous clean-up, a rapid simplified strategy for PCDD/F and selected PCB analysis determination is proposed for fatty food samples.     

PTV-LV-GC/MS/MS as screening and complementary method to HRMS for the monitoring of dioxin levels in food and feed

Recent developments in trapping efficiency inside ion trap mass spectrometer permitted to lower instrument detection limit (IDL). An IDL of 200 fg μl⁻¹ injected with a signal-to-noise ratio of 5:1 for tetrachlorodibenzo-p-dioxin (TCDD) was obtained by gas chromatography coupled to a quadrupole ion storage mass spectrometer in tandem mode (GC/MS/MS). Coupling large volume programmable temperature vaporizer (PTV-LV) injection to GC/MS/MS provides an alternative and complementary method to classical splitless-GC injection connected to high-resolution mass spectrometry (splitless-GC/HRMS) method for dioxin monitoring in food and feed.

An injection volume of 10 μl was found to be the best compromise between the sensitivity requirements and the robustness required for a high throughput method. PTV-LV-GC/MS/MS and Splitless-GC/HRMS were compared by performing analysis on five different matrices such as beef fat, yolk eggs, milk powder, animal feed and serum samples covering a concentration range of two orders of magnitude (i.e. 0.2–25 ng WHO-TEQ kg⁻¹). An analysis of variance (ANOVA) was carried out. Fisher tests pointed out that the method effect for all the 2,3,7,8 congeners was not significant, indicating that the null hypothesis (H₀: μ₁=μ₂=…=μ_n) was not rejected. Moreover, the interaction effects between methods and matrices were not significant for most of the 2,3,7,8 congeners. However, three congeners (2,3,7,8-TCDF; 1,2,3,4,7,8-HxCDD and 1,2,3,4,6,7,8-HpCDD) were characterized by P-values lower than the significance level (=0.05). In toxic equivalence (TEQ), the study showed that no significant bias was observed between the two methods. Consequently, PTV-LV-GC/MS/MS is an attractive technique and can be used as a cost effective complementary method to HRMS for dioxin levels monitoring in food and feed.     

Corps euclidiens,unités exceptionnelles et courbes elliptiques

Lenstra [Invent. Math.36 (1977), 237–254] has proved that a number field possessing sequences of integers whose differences are units, having a big enough length with respect to the discriminant of the field, is Euclidean. In this paper, we use this result to construct some new Euclidean fields; suitable sequences are obtained by using points of finite order on some elliptic curves.     

Solid-phase synthesis of arginine-containing peptides and fluorogenic substrates using a side-chain anchoring approach

Attachment of an amino acid to a solid support by its side chain is sometimes necessary to take advantage of an alpha-carboxylic group available for diverse modifications, including the incorporation of a fluorophore for the preparation of fluorogenic substrates. In contrast to most other amino acids, anchoring the guanidinium group of an arginine to a resin requires the use of a supplementary linker. To avoid the usually multistep synthesis of such a linker as well as its difficult attachment to the guanidine group, we developed a simple method where the guanidine group is built on a Rink amide resin. Our strategy followed the steps of guanidine formation: (i) addition of an isothiocyanate derivative of ornithine to the amino group of a solid support, yielding Nomega-linked thiocitrulline; (ii) S-methylation of thiourea; (iii) guanidinylation using ammonium acetate. Cleavage of the resin generated the arginine-containing compound, the amine group of the resin becoming part of the guanidine. We have demonstrated the usefulness of this method by the synthesis of a series of fluorogenic substrates for trypsin-like serine proteases, which were obtained in high yield and purity. Then, our strategy also allowed generation from the same precursor differentially substituted arginine derivatives, including Nomega-methyl- and Nomega-ethylarginines. The ability to prepare such analogues together with the intermediates thiocitrulline and S-methylisothiocitrulline from a unique precursor while the alpha-amine and carboxylic groups remain available for modification also makes this method a powerful tool for combinatorial solid-phase synthesis of NO synthase inhibitors.     

Dissociation of Fumaric Acid: Spectrophotometric Investigation in Aqueous Solutions from 10 to 90 <Superscript>∘</Superscript>C and Theoretical Considerations

The dissociation constants of fumaric acid were extracted from UV-vis spectra in the 10–90 ^∘C range. These values were used to extract thermodynamic parameters that showed the temperature effects on the dissociations reactions to be dominantly driven by the solvent. The molar absorption coefficients for the fumaric acid, the bifumarate and fumarate species, can be accurately reproduced with the two-term Gauss–Lorentz equation. Deconvolution of these bands showed strong π–π^∗ transitions for all species and weaker charge-transfer-to-solvent transitions for the charged species. TD-DFT calculations were used to identify the most important molecular orbitals involved in the vertical excitations of the fumaric acid species. The electron population and their states of delocalization were also estimated with topological analyses of the electron density and of the Becke–Edgecombe Electron Localization Function.     

Catalytic asymmetric synthesis with rh-diene complexes: 1,4-addition of arylboronic acids to unsaturated esters

A general route to enantioenriched tert-butyl 3,3-diarylpropanoates is presented. These useful building blocks are prepared via an asymmetric rhodium-catalyzed conjugate addition of arylboronic acids to unsaturated tert-butyl esters in the presence of chiral dienes as ligands. The addition of both electron-poor and electron-rich boronic acids proceeds smoothly with various enoates in 63-90% yield with high enantioselectivites (89-94% ee). [reaction: see text]     

Measurement of PCDDs, PCDFs, and non-ortho-PCBs by comprehensive two-dimensional gas chromatography-isotope dilution time-of-flight mass spectrometry (GC x GC-IDTOFMS)

Comprehensive two-dimensional gas chromatography with isotope-dilution time-of-flight mass spectrometry (GC × GC-IDTOFMS) was used to measure polychlorinated dibenzo-p-dioxin (PCDD), polychlorinated dibenzofuran (PCDF), and coplanar polychlorinated biphenyl (cPCB) concentrations in ash, sediment, vegetation, and fish samples. The GC × GC capability was achieved by using a quad jet, dual stage, thermal modulator. Zone compression of the GC peaks from modulation resulted in a significant increase of the signal intensity over classical GC-IDTOFMS. The GC × GC column set used an Rtx-Dioxin 2 phase as the first dimension (¹D) and an Rtx-500 as the second dimension (²D). The chromatographic separation of the 17 PCDD/Fs and the 4 cPCBs was attained in ¹D except for 2,3,7,8-TCDD and CB126 for which deconvoluted ion currents (DIC) were required to be reported separately. The Rtx-500 phase separated the bulk matrix interfering compounds from the target analytes in ²D. The instrumental limit of detection (iLODs) was 0.5 pg for 2,3,7,8-TCDD. The calibration curves showed good correlation coefficients for all the compounds investigated in the concentration range of 0.5–200 pg. GC × GC-IDTOFMS results compared favorably to those from conventional isotope-dilution one-dimensional gas chromatography-high resolution mass spectrometry (GC-IDHRMS). The comprehensive mass analysis of the TOFMS further permitted the identification of other contaminants of concern in the samples.