1,1,2,2-Tetraethynylethanes: Synthons for Tetraethynylethenes and Modules for Acetylenic Molecular Scaffolding

The synthesis of functionalized 1,1,2,2-tetraethynylethanes (= 3,4-diethynylhexa-1,5-diynes) as synthons for tetraethynylethenes (3,4-diethynylhex-3-ene-1,5-diynes) and as building blocks for three-dimensional acetylenic molecular scaffolding targeting the synthesis of the molecular carbon belts 3 and 4 is reported (Scheme 1). Reaction of diethyl oxalate and (trialkylsilyl)ethynyl Grignard reagents afforded the silyl-protected 3,4-diethynylhexa-1,5-diyne-3,4- diols 7 and 8 which were transformed in high yields into the cyclic carbonate 9 and the cyclic orthoesters 10–13 , respectively (Scheme 2). The solid-state structures of 9 and 10 were elucidated by X-ray crystallography. The alkyne protecting groups in 9, 10 , and 12 were smoothly removed to give the free tetraynes 14–16 as relatively stable oils in nearly quantitative yields (Scheme 3). Orthoesters 15 and 16 underwent Pd-catalyzed cross-coupling with iodobenzene to give the tetraphenyl derivatives 17 and 18 (Scheme 4). Thermal acid-catalyzed elimination of the orthoester moieties in 12 and 13 produced the silyl-protected tetraethynylethenes 19 and 20 and concluded a novel, simple three-step synthesis of these fully two-dimensionally conjugated π-chromophores (Scheme 5).     

Characterization of xylitol dehydrogenase from debaryomyces hansenii

The xylitol dehydrogenase (EC 1.1.1.9) from xylose-grown cells ofDebaryomyces hansenii was partially purified in two Chromatographic steps, and characterization studies were carried out in order to inves tigate the role of the xylitol dehydrogenase-catalyzed step in the regu lation of D-xylose metabolism. The enzyme was most active at pH 9.0–9.5, and exhibited a broad polyol specificity. The Michaelis con stants for xylitol and NAD⁺ were 16.5 and 0.55 mM, respectively. Ca²⁺, Mg²⁺, and Mn²⁺ did not affect the enzyme activity. Conversely, Zn²⁺, Cd²⁺, and Co²⁺ strongly inhibited the enzyme activity. It was concluded that NAD⁺-xylitol dehydrogenase from D.hansenii has similarities with other xylose-fermenting yeasts in respect to optimal pH, substrate specificity, and K_m value for xylitol, and therefore should be named L-iditol:NAD⁺-5-oxidoreductase (EC 1.1.1.14). The reason D.hansenii is a good xylitol producer is not because of its value of K_m for xylitol, which is low enough to assure its fast oxidation by NAD⁺ xylitol dehydrogenase. However, a higher K_m value of xylitol dehydro genase for NAD⁺ compared to theK _m values of other xylose-ferment ing yeasts may be responsible for the higher xylitol yields.     

Supercritical fluid extraction of flumetralin in tobacco

Summary This work evaluates the level of Flumetralin residues in real tobacco samples. Conventional extraction methods were compared with SFE methods in both static and dynamic modes using CO₂ and CO₂ with modifier. Additionally, in the dynamic SFE mode, different collection approaches, such as collection at room temperature without solvent, collection at room temperature in the presence of solvent (hexane) and collection in an ice bath, without solvent, were studied. SFE showed itself to be a promising extraction technique for pesticide residues in tobacco samples.     

Enzymatic bleaching of organosolv sugarcane bagasse pulps with recombinant xylanase of the fungus Humicola grisea and with commercial cartazyme HS xylanase

Organosolv (ethanol/water and acetosolv) pulps were treated with Humicola grisea var. thermoidea and compared with Cartazyme HS xylanase-treated pulp. The ethanol/water pulps treated with H. grisea had the same viscosity as unbleached pulps (8 cP). Ethanol/water pulps treated with Cartazyme had higher viscosity than H. grisea-treated pulps (12 cP). Acetosolv pulps treated with H. grisea and Cartazyme presented a reduction in viscosity; however, the pulps treated with H. grisea had a lower reduction in viscosity than Cartazyme-treated pulps. Ethanol/water pulps treated with H. grisea had a 23% reduction in kappa number in 4 and 8 h of treatment, compared with the unbleached pulps. Cartazyme-treated pulps had a kappa number similar to that of the control pulps for 4 h of treatment. Extending the treatment time to 12 h resulted in a reduction of 33%. The acetosolv pulp treated with H. grisea had a kappa number reduced to 23% in 4 h. Cartazyme treatment resulted in a reduction of 55 and 44% in kappa number for 4 and 8 h of treatment, respectively, when compared with control pulp. Extending the treatment time to 12 h decreased the kappa number 72%. Fourier transform infrared spectra and principal component analysis showed differences among unbleached, H. grisea-treated, and Cartazyme-treated pulps.     

Comprehensive two-dimensional gas chromatography with isotope dilution time-of-flight mass spectrometry for the measurement of dioxins and polychlorinated biphenyls in foodstuffs. Comparison with other methods

A comprehensive two-dimensional gas chromatography time-of-flight mass spectrometry (GC x GC-TOF-MS) experimental setup was tested for the measurement of seven 2,3,7,8-substituted polychlorinated dibenzo-p-dioxins (PCDDs), ten 2,3,7,8-substituted polychlorinated dibenzofurans (PCDFs), four non-ortho-polychlorinated biphenyls (PCBs), eight mono-ortho-PCBs, and six indicator PCBs (Aroclor 1260) in foodstuff samples. A 40m RTX-500 (0.18mm I.D., 0.10 microm df) was used as the first dimension (1D) and a 1.5 m BPX-50 (0.10mm I.D., 0.10 microm df) as the second dimension (2D). The GC x GC chromatographic separation was completed in 45 min. Quantification was performed using 13C-label isotope dilution (ID). Isotope ratios of the selected quantification ions were checked against theoretical values prior to peak assignment and quantification. The dynamic working range spanned three orders of magnitude. The lowest detectable amount of 2,3,7,8-TCDD was 0.2 pg. Fish, pork, and milk samples were considered. On a congener basis, the GC x GC-ID-TOF-MS method was compared to the reference GC-ID high resolution mass spectrometry (HRMS) method and to the alternative GC-ID tandem-in-time quadrupole ion storage mass spectrometry (QIST-MS/MS). PCB levels ranged from low picogram (pg) to low nanogram (ng) per gram of sample and data compared very well between the different methods. For all matrices, PCDD/Fs were at a low pg level (0.05-3 pg) on a fresh weight basis. Although congener profiles were accurately described, RSDs of GC x GC-ID-TOF-MS and GC-QIST-MS/MS were much higher than for GC-ID-HRMS, especially for low level pork and milk. On a toxic equivalent (TEQ) basis, all methods, including the dioxin-responsive chemically activated luciferase gene expression (DR-CALUX) assay, produced similar responses. A cost comparison is also presented.     

An easy and economically viable route for the decoration of carbon nanotubes by magnetite nanoparticles, and their orientation in a magnetic field

A simple, cheap and tunable approach for the decoration of carbon nanotubes by magnetite nanoparticles and their orientation in a magnetic field is reported.     

Practical Pd/C-mediated allylic substitution in water

Pd/C-mediated allylic substitution in water is described as an interesting alternative to classical homogeneous conditions. The reaction applied to allylic acetates showed a wide range of compatibility with various nitrogen, sulfur, oxygen, and carbon nucleophiles. Notably, the method features inexpensive reagents and a nontoxic solvent. Moreover, measurement of the palladium content in water by ICP-MS shows low palladium contamination (4 ppm) of the solvent, rendering this method safer for the environment compared to homogeneous conditions. The first asymmetric example of Pd/C-mediated allylic substitution is also disclosed.     

Nonequilibrium synthesis and assembly of hybrid inorganic-protein nanostructures using an engineered DNA binding protein

We show that a protein with no intrinsic inorganic synthesis activity can be endowed with the ability to control the formation of inorganic nanostructures under thermodynamically unfavorable (nonequilibrium) conditions, reproducing a key feature of biological hard-tissue growth and assembly. The nonequilibrium synthesis of Cu(2)O nanoparticles is accomplished using an engineered derivative of the DNA-binding protein TraI in a room-temperature precursor electrolyte. The functional TraI derivative (TraIi1753::CN225) is engineered to possess a cysteine-constrained 12-residue Cu(2)O binding sequence, designated CN225, that is inserted into a permissive site in TraI. When TraIi1753::CN225 is included in the precursor electrolyte, stable Cu(2)O nanoparticles form, even though the concentrations of [Cu(+)] and [OH(-)] are at 5% of the solubility product (K(sp,Cu2O)). Negative control experiments verify that Cu(2)O formation is controlled by inclusion of the CN225 binding sequence. Transmission electron microscopy and electron diffraction reveal a core-shell structure for the nonequilibrium nanoparticles: a 2 nm Cu(2)O core is surrounded by an adsorbed protein shell. Quantitative protein adsorption studies show that the unexpected stability of Cu(2)O is imparted by the nanomolar surface binding affinity of TraIi1753::CN225 for Cu(2)O (K(d) = 1.2 x 10(-)(8) M), which provides favorable interfacial energetics (-45 kJ/mol) for the core-shell configuration. The protein shell retains the DNA-binding traits of TraI, as evidenced by the spontaneous organization of nanoparticles onto circular double-stranded DNA.     

Carboxylate anions binding and sensing by a novel tetraazamacrocycle containing ferrocene as receptor

A tetraazamacrocycle containing ferrocene moieties has been synthesized and characterized. The tetraprotonated form of this compound was evaluated as a receptor (R) for anion recognition of several substrates (S), Cl(-), PF(6)(-), HSO(4)(-), H(2)PO(4)(-) and carboxylates, such as p-nitrobenzoate (p-nbz(-)), phthalate (ph(2-)), isophthalate (iph(2-)) and dipicolinate (dipic(2-)). (1)H NMR titrations in CD(3)OD indicated that this receptor is not suitable for recognizing HSO(4)(-) and H(2)PO(4)(-), but weakly binds p-nbz(-), and strongly interacts with ph(2-), dipic(2-), and iph(2-) anions forming 1 : 2 assembled species. The largest beta(2) binding constant was determined for ph(2-), followed by dipic(2-) and finally iph(2-). The effect of the anionic substrates on the electron-transfer process of the ferrocene units of R was evaluated using cyclic voltammetry (CV) and square wave voltammetry (SWV) in methanol solution and 0.1 mol dm(-3)(CH(3))(4)NCl as the supporting electrolyte. Titrations of the receptor were undertaken by addition of anion solutions in their tetrabutylammonium or tetramethylammonium forms. The protonated ligand exhibits a reversible voltammogram, which shifts cathodically in the presence of the substrates. The data revealed kinetic constraints in the formation of the receptor/substrate entity for dipic(2-), ph(2-) and iph(2-) anions, but not for p-nbz(-). In spite of the slow kinetics of assembled species formation with the ph(2-) substrate, this anion provides the largest redox-response when the supramolecular entity is formed, followed by dipic(2-), iph(2-) and finally p-nbz(-) anions. This trend is in agreement with the (1)H NMR results and the values of the binding constants. Single crystal X-ray structures of the receptor with PF(6)(-), ph(2-), iph(2-) and p-nbz(-) were carried out and showed that supermolecules with a RS(2) stoichiometry are formed with the first three anions, but RS(4) with p-nbz(-). In all cases the binding occurs outside the macrocyclic cavity via N-H...O=C hydrogen bonds for carboxylate anions and N-H...F hydrogen bonds for the PF(6)(-) anion, which is in agreement with the solution results. The macrocyclic framework adopts different conformations in order to interact with each substrate having Fe...Fe intramolecular distances ranging from 10.125(14) to 12.783(15)A.