Study of peptides containing modified lysine residues by tandem mass spectrometry: precursor ion scanning of hexanal-modified peptides

Upon hexanal-modification in the presence of NaCNBH(3), the oxidized B chain of insulin becomes mono- and further dialkylated on both the N-terminal and Lys(29) residues. A pseudo-MS(3) study was performed with a triple-quadrupole mass spectrometer on the different modified lysine-containing species to gain further insights into the characteristic fragmentation pattern. These fragmentations, in good agreement with true MS(3) measurements obtained using an ion trap mass spectrometer, highlighted characteristic monoalkylated lysine (immonium-NH(3)) and protonated modified caprolactam ions at m/z 168 and 213, respectively. In contrast, no fragment ion derived from a modified lysine residue (immonium or caprolactam) was observed when dialkylation occurs on Lys(29). However, a fragment ion corresponding to a protonated dihexylamine was observed at m/z 186. This loss, characteristic of dialkylated lysine fragmentation, was also observed upon dialkylation of N(alpha)-acetyllysine with either hexanal or pentanal. On the other hand, acetylation and malondialdehyde-modification of the N(alpha)-acetyllysine side chain led mainly to the corresponding modified (immonium-NH(3)) fragment ions at m/z 126 and 138, respectively. Finally, it was demonstrated that precursor ion scanning for both m/z 168 and 213 ions led to specific and sensitive identification of peptides containing hexanal-modified lysine residues within an unfractionated tryptic digest of hexanal-modified apomyoglobin. Thus, Lys(42), Lys(45), Lys(62), Lys(63), Lys(77), Lys(87), Lys(96), Lys(98), Lys(145) and Lys(147) were found to be modified upon reaction with hexanal.     

Comparative study of photodynamic properties of 13,15-N-cycloimide derivatives of chlorin p6

Comparative study of 13,15-[N-(2-hydroxyethyl)]cycloimide chlorin p6 (2), 13,15-(N-acetoxy)cycloimide chlorin p6 (3), 13,15-(N-hydroxy)cycloimide chlorin p6 methyl ester (4) and 13,15-(N-methoxy)cycloimide chlorin p6 methyl ester (5) together with the previously investigated 13,15-[N-(3-hydroxypropyl)]cycloimide chlorin p6 (1) was performed. The dependence of the key photodynamic properties of 1-5 on the introduced substituents was analyzed. The photoinduced cell-killing activity of 4 is 100- and 280-fold higher than that of chlorin p6 and Photogem, respectively, as estimated on A549 human lung adenocarcinoma cells. The activity is reduced eight times in the order 4 > 5 > 1 > 2 > 3. The intracellular accumulation of 1-5 occurs in cytoplasm in a monomeric form bound to the lipids of cellular membranes. This form of 1, 2, 3, 4 and 5 is characterized by the high quantum yield of singlet oxygen generation, which depends on the introduced substituents, 0.66, 0.59, 0.35, 0.51 and 0.73, respectively. The photostability is two-fold less for 1 and four-fold less for 2, 3 and 5 than for 4. The rates of cellular uptake and efflux of 1-5 vary widely, thus providing the way to optimize the pharmacological properties of the photosensitizer (PS) using the respective substituents. Modifying the substituents, 1-5 were targeted to different cellular organelles. The enhanced accumulation in the Golgi apparatus and mitochondria complemented with diffuse staining of intracellular membranous structures is a property of 1-4. Compound 5 accumulates selectively in the lipid droplets and stains weakly perinuclear structures. Temperature-sensitive mechanisms of transport are responsible for the 1-4 uptake. Diffusion can play a role in the internalization of 5 but not of 1-4. Endocytosis via caveolae, clathrin-dependent and adenosine triphosphate-dependent pathways are not noticeably involved in the 1-5 internalization. Independently from their intracellular localization 1, 4 and 5 are highly efficient near-IR PS, which induce predominantly an apoptotic type of cell death under conditions providing ca 50% level of phototoxicity and necrosis at the 100% level of phototoxicity.     

Development and validation of an ultra-high-performance liquid chromatography coupled to time-of-flight mass spectrometry method to quantify benzoic acid and long-chain monocarboxylic acids (C12–C28) in atmospheric aerosols

An ultra-high-performance liquid chromatography/time-of-flight mass spectrometry (with negative ion electrospray ionization) methodology was developed for the simultaneous quantification of benzoic acid and 15 long-chain monocarboxylic acids (MCAs) in ambient aerosols. A fast and quantitative pressurized fluid extraction procedure was optimized using experimental design and the extracts were analyzed without any further clean-up step. Chromatographic separation was achieved on a BEH-C18 column with a mobile phase consisting of 5 mM formic acid in water/acetonitrile (90:10, v/v) and methanol. Excellent precision and accuracies in the MS mass measurements were observed. The method was validated using actual samples spiked with a solution containing either standards or ¹³C-surrogates. Matrix effects were observed for the C₁₄ MCA only. It was then applied to air particulate reference materials and atmospheric samples collected by a low-volume sampler.     

Photoelectron spectra of vinyl- and 1-alkynylgermanes and stannanes

Primary vinylic and acetylenic germanes and stannanes, synthesized by a chemoselective reduction of the corresponding trichloro derivatives, were investigated by ab initio quantum chemical methods and photoelectron spectroscopy. In particular, the PE spectra display very well-resolved bands which show the increasing destabilizing effect of 14 group heteroatom α-substitution of double or triple carbon–carbon bonds.     

Lanthanide luminescence efficiency in eight- and nine-coordinate complexes: Role of the radiative lifetime

The photophysical parameters for the sensitization of metal-centred luminescence are analyzed in two series of complexes with tridentate and hexadentate ligands having N_xO_y chelating units. In particular, the radiative lifetime τ_rad is experimentally estimated for 29 nine-coordinate Eu^III complexes and 10 eight- and nine-coordinate Yb^III complexes. The known dependence of τ_rad on refractive index is substantiated by comparing data for solid-state samples and solutions. Moreover, a clear dependence of τ_rad with the coordination environment is evidenced and in the case of Eu^III, a comparison between τ_rad and the nephelauxetic effect generated by the ligands is attempted. Altogether, this extensive analysis points to the importance of having a handle on τ_rad when designing ligands for highly luminescent lanthanide-containing molecular edifices. This, in turn, should stimulate initiating theoretical considerations to unravel a reliable relationship between τ_rad and the electronic structure of the ligands.     

Enantioselective ketoester reductions in water: a comparison between microorganism- and ruthenium-catalyzed reactions

In the search for green chemistry methods for the enantioselective reduction of ketoesters Saccharomyces cerevisiae- and ruthenium-catalyzed reactions in water have been investigated. The highest enantiomeric excesses for the reduction of α- and β-ketoesters have been obtained by S. cerevisiae. Chiral ruthenium catalysts are active for the reduction of all ketoesters with low to moderate enantioselectivities depending on the nature of the substrate and ligand. Interestingly, for several substrates both enantiomers of the hydroxyesters have been obtained according either to the catalytic method or to the structure of the ligand.     

Chiral diphosphines and diphosphinites derived from 2,2-biphosphole: Stereodynamic ligands for asymmetric catalysis

In this account, the recent advances on chiral stereochemically dynamic 2,2’-biphosphole ligands for applications in asymmetric catalysis are reported. In the first part, the synthesis of stereodynamic diphosphines and diphosphinites derived from 2,2’-biphosphole is presented. The second part describes the kinetic dynamic resolution to give diastereo- and enantiopure complexes. Applications in asymmetric allylic substitution, hydroformylation and hydrogenation are presented in the last part.     

Oxygen and nitrogen Lewis base adducts of [UO2(OTf)2]. Crystal structures of polypyridine complexes with out-of-plane uranyl equatorial coordination

Dissolution of [UO2(OTf)2](1) in anhydrous thf, dme or py led to the formation of the complexes [UO2(OTf)2(thf)3](2), [UO2(OTf)2(dme)](3) and [UO2(OTf)2(py)3](4), respectively. Compounds 2 and 4 are neutral monomers in the solid state as well as the chloride [UO2Cl2(py)3](5) which was prepared in a similar way as for from the dimer [[UO2Cl2(thf)2]2]. Addition of 4 equivalents of triphenylphosphine oxide (tppo) to 1 afforded, in pyridine, the dicationic species [UO2(tppo)4][OTf]2 (6). The bi- or terdentate nitrogen molecules 2,2'-bipy, phen or terpy reacted with 1 in acetonitrile or pyridine to give [UO2(OTf)2(bipy)2](7), [UO2(phen)3][OTf]2(8), [UO2(OTf)2(terpy)](9) and [UO2(terpy)2][OTf]2(10), respectively. The hydroxide compound [[UO2(OH)(terpy)]2][OTf]2(11) was obtained by hydrolysis in air of 1 in a mixture of acetonitrile and ethanol in the presence of terpyridine. The X-ray crystal structures of , and reveal a novel coordination geometry for the uranyl ion, the uranium atom being in a rhombohedral environment; the six coordinating ligands atoms of the [UO2]2+ ion are separated into two parallel and staggered equilateral triangles and the UO2 axis is perpendicular to these triangles, passing through their centre. The structures of the mono(terpy) complexes 9 and 11 show the uranium atoms in a distorted pentagonal bipyramidal configuration with the nitrogen atom of the central pyridine ring of the terpy ligand significantly displaced from the equatorial plane.     

Dynamic arsenic removal on a MnO2-loaded resin

Previous batch studies on a polystyrene matrix loaded with manganese dioxide, synthesized from an anionic commercial resin in chloride form, have proven the efficiency of this sorbent in As(V) and As(III) removal. This solid is now tested with column experiments to predict its behavior in a treatment process. An artificial water, with a composition in major ions similar to that of granitic water, often contaminated with arsenic, was prepared. This artificial water was used to simulate arsenic removal processes under near-natural conditions and with a stable composition. Furthermore, the hydride generation AAS analytical method was optimized to measure low arsenic concentrations (1 to 20 microg/L).