Analysis of semiconducting materials by high-resolution radiofrequency glow discharge mass spectrometry

The analytical capabilities of a high-resolution mass spectrometer in combination with a 13.56 MHz glow discharge ion source for the analysis of semiconducting materials (silicon carbide and gallium arsenide) were studied. It was shown that single positively charged ions of sample material have about 10 eV higher average energy than the ions of the discharge and residual gas. Therefore effective energy separation of the ions of analyte from the ions of the discharge and residual gas was achieved by adjusting the ion transfer optics (breadth and position of energy slit), which improves the analytical capabilities of the developed method.Some analytical applications are presented to illustrate the performance of r.f. GDMS for the bulk analysis of semiconducting materials. The results of the trace element analysis of gallium arsenide and silicon carbide samples are compared with data of independent methods (LIMS, ICP-AES, SIMS).Dedicated to Professor Dr. rer. nat. Dr. h.c. Hubertus Nickel on the occasion of his 65th birthdayOn leave from the Institute of Inorganic Chemistry, 630090 Novosibirsk, Russia     

Diblock copolymers based on allyl methacrylate: Synthesis,characterization, and chemical modification

Different diblock copolymers constituted by one segment of a monomer supporting a reactive functional group, like allyl methacrylate (AMA), were synthesized by atom transfer radical polymerization (ATRP). Bromo‐terminated polymers, like polystyrene (PS), poly(methyl methacrylate) (PMMA), and poly(butyl acrylate) (PBA) were employed as macroinitiators to form the other blocks. Copolymerizations were carried out using copper chloride with N,N,N′,N″,N″‐pentamethyldiethylenetriamine (PMDETA) as the catalyst system in benzonitrile solution at 70 °C. At the early stage, the ATRP copolymerizations yielded well‐defined linear block copolymers. However, with the polymerization progress a change in the macromolecular architecture takes place due to the secondary reactions caused by the allylic groups, passing to a branched and/or star‐shaped structure until finally yielding gel at monomer conversion around 40% or higher. The block copolymers were characterized by means of size exclusion chromatography (SEC), ¹H NMR spectroscopy, and differential scanning calorimetry (DSC). In addition, one of these copolymers, specifically P(BA‐b‐AMA), was satisfactorily modified through osmylation reaction to obtain the subsequent amphiphilic diblock copolymer of P(BA‐b‐DHPMA), where DHPMA is 2,3‐dihydroxypropyl methacrylate; demonstrating the feasibility of side‐chain modification of the functional obtained copolymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3538–3549, 2007     

Champ de vitesse dans un échangeur à vortex en régime turbulentHeat exchanger velocity field with turbulent inlet condition

We consider the isothermal flow through a cylindrical flat chamber, a model of some particular heat exchanger, for which LDV measurements and a numerical simulation have been performed. Experimental results show the establishment of an important vortex zone, the secondary flow extending all along the chamber radius. This observation leads to an expected significant increase of the fluid mixing. Results issued from the numerical simulation appear to be in close agreement with experimental data. Nevertheless, the k–ε model used here must be improved to obtain a better approach near the vortex centre. To cite this article: S. Petitot et al., C. R. Mecanique 330 (2002) 593–599.     

Surface and interfacial properties of PVDF/acrylic copolymer blends before and after UV exposure

Morphological and chemical properties of both the surface and interface of poly(vinylidene fluoride)/poly(methyl methacrylate)-co-poly(ethyl acrylate) (PVDF/PMMA-co-PEA) blend films have been investigated before and after the samples were exposed to ultraviolet (UV) irradiation using a xenon arc lamp at 50 °C and 9% relative humidity (RH) for 7 months. Surface and interfacial morphologies were studied by atomic force microscopy (AFM). Chemical composition information was obtained by confocal Raman microscopy, attenuated total reflection-FTIR spectroscopy (ATR-FTIR), X-ray photoelectron spectroscopy (XPS), and contact angle measurements. Results show an enrichment of the PVDF material at the air surface, while the acrylic copolymer enriches the interface. Blends having greater than 50% mass fraction of PVDF show little change in the surface morphology after UV exposure for 7 months. However, for a lower PVDF content, blends exhibit significant degradation of PMMA-co-PEA copolymer and a much rougher surface after UV exposure. Microstructural changes in the PVDF spherulites are also observed after UV degradation. It is found that the surface and interfacial morphologies are correlated with the chemical properties.     

Acetylene weak bands at 2.5 μm from intracavity Cr:ZnSe laser absorption observed with time-resolved Fourier transform spectroscopy

The spectral dynamics of a mid-infrared multimode Cr(2+):ZnSe laser located in a vacuum sealed chamber containing acetylene at low pressure is analyzed by a stepping-mode high-resolution time-resolved Fourier transform interferometer. Doppler-limited absorption spectra of C(2)H(2) in natural isotopic abundance are recorded around 4000 cm(-1) with kilometric absorption path lengths and sensitivities better than 3 10(-8) cm(-1). Two cold bands are newly identified and assigned to the ν(1)+ν(4) (1) and ν(3)+ν(5) (1) transitions of (12)C(13)CH(2). The ν(1)+ν(5) (1) band of (12)C(2)HD and fourteen (12)C(2)H(2) bands are observed, among which for the first time ν(2)+2ν(4) (2)+ν(5) (-1).     

Convenient preparation of 5-ethynyl-octaethylporphyrin free base and zinc complex

A method leading to the preparation of the free base or zinc meso-ethynyl functionalized octaethylporphyrin has been developed, which will open the access to various meso-ethynyl metalloporphyrins.     

A new, fast and efficient synthesis of 3-aryl indenones: intramolecular cyclization of 1,3-diarylpropynones in superacids

1,3-Diarylpropynones were cleanly converted to the corresponding 3-arylindenones in various superacidic media. This new, simple, one-pot reaction proved to be efficient (yields up to 95%) and very fast (reaction time less than 30 min).     

Markovian Solutions of Inviscid Burgers Equation

For solutions of (inviscid, forceless, one dimensional) Burgers equation with random initial condition, it is heuristically shown that a stationary Feller–Markov property (with respect to the space variable) at some time is conserved at later times, and an evolution equation is derived for the infinitesimal generator. Previously known explicit solutions such as Frachebourg–Martin's (white noise initial velocity) and Carraro–Duchon's Lévy process intrinsic-statistical solutions (including Brownian initial velocity) are recovered as special cases.     

Conversations on mind, matter, and mathematics

Conclusion  The debate between Jean-Pierre Changeux and Alain Connes is one of the most, interesting to take place in recent years. It re-frames in a very up-to-date context a whole series of traditional and difficult questions from the standpoint of the knowledge and experience of two of the leading protagonists of contemporary science. To the choice presented by the neurobiologist between a Platonist ontology and a neurocognitive psychology of mathematical activity, the mathematician replies with a conception that is objective (neither ontological nor psychological) of the thoroughly consistent universe of mathematical idealities. It is indeed in this three-sided arena that the major difficulties play themselves out. One of the great virtues of the book is to cast a spotlight on this confrontation.