2,3-Dihydroxypyridine Loaded Amberlite XAD-2 (AXAD-2-DHP): Preparation, Sorption–Desorption Equilibria with Metal Ions, and Applications in Quantitative Metal Ion Enrichment from Water, Milk and Vitamin Samples

2,3-Dihydroxypyridine loaded (via –N=N–linker) Amberlite XAD-2 (AXAD-2-DHP) was prepared and characterized by elemental analyses, TGA and FT-IR spectra. It (1g packed in a column of 1cm diameter; surface area 135.5m²g^–1) was found to be an effective solid phase sorbent for enriching Zn²⁺, Mn²⁺, Ni²⁺, Pb²⁺, Cd²⁺, Cu²⁺, Fe³⁺ and Co²⁺ at pH 3.5 to 7.0 using flow rates between 1.0–5.0mLmin^–1. For desorption (recovery 97.0–99.8%) of the metal ions, 8 to 10mL of 2.0molL^–1 HCl or 1.5molL^–1 HNO₃ at a flow rate of between 2.0 and 4.0mLmin^–1 were found most suitable. The t_1/2 (time for 50% sorption) is between 2 and 10min when a 50mL solution (containing a total amount of metal of 2mg) was equilibrated with 0.5g of resin. Sorption of all metal ions except Pb²⁺ follows the Langmuir model, whereas for Pb the data fits with the Freundlich model. The sorption capacity is between 60.7 (for Cd) and 406.7 (for Cu) µmolg^–1. The resin can withstand an acid concentration of 6molL^–1 and can be reused for thirty cycles of sorption–desorption. The preconcentration factor varies between 100 and 300. For Cd, Ni and Cu the sorption capacity of 2,3-dihydroxypyridine loaded cellulose is lower than that of the present resin. The tolerance limits of electrolytes, humic acid, complexing agents, Ca²⁺ and Mg²⁺ in the enrichment of all metal ions are reported. The limits of detection are 3.88, 5.37, 8.72, 13.88, 4.71, 1.24, 0.59 and 0.30µgL^–1 for Zn²⁺, Mn²⁺, Ni²⁺, Pb²⁺, Cd²⁺, Cu²⁺, Fe³⁺ and Co²⁺, respectively. The calibration curves for flame AAS determination were linear in the ranges 0.018–1.0, 0.067–5.0, 0.2–5.0, 0.9–20, 0.028–2.0, 0.077–5.0, 0.19–10 and 0.1–3.5µgmL^–1, respectively. All the eight metal ions in river and synthetic water samples, Co in vitamin tablets and Zn in milk samples have been quantitatively enriched with Amberlite XAD-2-DHP and determined by flame atomic absorption spectrometry.     

A titrimetric method for the sequential determination of thorium and uranium

A method for the sequential determination of thorium and uranium has been developed. In the sample solution containing thorium and uranium, thorium is first determined by complexometric titration with ethylenediaminetetraacetic acid (EDTA) and then in the same solution uranium is determined by redox titration employing potentiometry. As EDTA interferes in uranium determination giving positive bias, it is destroyed by fuming with HClO₄ prior to the determination of uranium. A precision and accuracy of better than ±0.15% is obtained for thorium at 10mg level and uranium ranging from 5 mg to 20 mg in the aliquot.     

Thermoanalytical properties of monobasic nitrilotriacetate salts of alkaline earth metals and zinc

Monobasic metal nitrilotriacetate hydrated salts, MH[N(CH₂COO)₃].xH₂O, have been prepared by the reaction of nitrilotriacetic acid with metal carbonate. DTA studies of these salts both in N₂ and air reveal that these salts initially undergo dehydration and then, through acetate intermediates, decompose to oxycarbonates or oxides.     

Molecular octopus: octa functionalized calix[4]resorcinarene-hydroxamic acid [C4RAHA] for selective extraction, separation and preconcentration of U(VI)

A solvent extraction separation of uranium, in the presence of thorium, cerium and lanthanides with a new calix[4]resorcinarene bearing eight hydroxamic acid groups (C4RAHA) is described. Quantitative extraction of uranium is possible in ethyl acetate solution of C4RAHA at pH 8.0. The lambda(max) and molar absorptivity (varepsilon) for uranium is 356nm and 8352Lmol(-1)cm(-1). The Binding ratio of uranium with C4RAHA as evaluated by Job's method is 4:1. The system obeys Beer's law over the range 0.075-6.0mugml(-1) of uranium with Sandell sensitivity 0.0284mugcm(-2). A preconcentration factor of 142 was achieved by directly aspirating the extract for GF-AAS measurements. The two-phase stability constant evaluated at 25 degrees C for uranium is 15.91. The complexation is characterized by favorable enthalpy and entropy changes. A liquid membrane transport study of uranium was carried out from source to the receiving phase under controlled conditions and a mechanism of transport is proposed. Uranium has been determined in standard and environmental samples.     

Solid-phase extractive preconcentration and separation of lanthanum(III) and cerium(III) using a polymer-supported chelating calix [4] arene resin

In the present paper, solid-phase extractive preconcentration and separation of lanthanum(III) and cerium(III) using calix[4]arene-o-vanillinsemicarbazone immobilized on a polymeric matrix, a Merrifield peptide resin, is proposed. The diamino derivative of calix[4]arene was first diazotized and coupled with o-vanillinsemicarbazone to obtain a new “upper-rim” functionalized calix[4]arene-o-vanillinsemicarbazone. It was then covalently linked to the Merrifield peptide resin and characterized by FT-IR and elemental analysis. Quantitative studies were carried out by spectrophotometry and ICP-AES with a relative standard deviation of 1.7%. Various physicochemical parameters like pH, concentration of eluting agents, flow rate, total sorption capacity, metal-ligand stoichiometry, exchange kinetics, preconcentration factor, distribution coefficient, breakthrough capacity, resin stability, and effect of electrolytes and associated metal ions have been studied. The uptake and stripping of these metal ions on the resin was fast, indicating a better accessibility of La(III) and Ce(III) towards the chelating sites. Detection limits corresponded to three times the standard deviation of the blank (3σ_B) and amounted to 3.05 and 6.86 μg/L, along with preconcentration factors of 153 and 133 for La(III) and Ce(III), respectively. The robustness of the procedure is demonstrated by the recoveries obtained (>97.5%) for La(III) and Ce(III) in the presence of several cations and anions. The proposed method was satisfactorily applied to the separation of La(III) and Ce(III) from each other and also from U(VI) and Th(IV) by sequential acidic elution and varying pH. The validity of the method was tested by analyzing these metal ions in monazite sand and standard geological materials. The text was submitted by the authors in English.     

Synthesis of natural triisopentenylated flavanone, euchrenone a2

Euchrenone a₂ (7) isolated from the roots ofEuchresta japonica has been synthesised from 3-prenylphloroacetophenone (1) by other workers. We carried out its cyclodehydrogenation with dichloro dicyano quinone (DDQ) to obtain 6-acetyl-5,7-dihydroxy-2,2-dimethylchromene (2) which was ethoxymethylated in the 7-position to give 6-acetyl-7-ethoxymethoxy-5-hydroxychromene (3). Chalcone condensation of3 and 4-ethoxymethoxy-3-C-prenylbenzaldehyde (4) gave 4,6′-bisethoxymethoxy-2′-hydroxy-6″, 6″-dimethyl-3-C-prenylpyrano (2″, 3″–4,3) chalcone (5) which cyclised with methanolic sodium acetate to give protected 5,4′-bisethoxymethoxy-6″, 6″-dimethyl-3′-C-prenylpyrano (2″, 3″–7,8) flavanone (6). Deprotection of6 with 4% methanolic HCl yielded (7) with melting point and spectral data identical to that of the natural compound.     

Extraction of tri- and tetravalent actinides with dihexyl N,N-diethylcarbamoylmethyl phosphonate (DHDECMP) and TBP from nitric acid solutions

Extraction of trivalent (Pu³⁺, Am³⁺, actinides and Eu³⁺, a representative of lanthanides) and tetravalent (Np⁴⁺ and Pu⁴⁺) actinides has been studied with dihexyl N,N-di-ethylcarbamoylmethyl phosphonate (DHDECMP) in combination with TBP in benzene from 2M nitric acid. The stoichiometries of the species extracted were found to be M(NO₃)₃·(3–n) TBP·n DHDECMP (for trivalent ions) and M(NO₃)₄·(2–n) TBP·n DHDECMP (for tetravalent ions) by the slope ratio method. The extraction constants evaluated (from the distribution data) indicate that for tetravalent ions (with solvation number two) the extraction constant increases when TBP (Kh=0.17) molecules are successively replaced by more basic DHDECMP (Kh=0.34) molecules. However, for trivalent ions (with solvation number three) when TBP molecules are totally replaced by DHDECMP molecules stereochemical factors appear and instead of increase, a substantial decrease in extraction constants is observed for Eu³⁺ and Am³⁺, a lesser decrease being observed for Pu³⁺ (larger ion).