Liquid-Phase Oxidation of Some Aromatic Aldehydes,Hydrocarbons, and Alcohols by Cerium(IV) Catalyzed by Iridium(III) in Acidic Medium

Addition of traces of iridium(III) chloride with cerium(IV) sulfate (catalyst–substrate ratio (1:2994 to 1:10,000) in traditional water-bath heating resulted in the oxidation of p-chlorobenzaldehyde, p-nitrobenzaldehyde, benzyl alcohol, p-methoxy benzyl alcohol, p-xylene, and p-nitrotoluene dissolved in acetic acid to give 77%, 90%, 21.7%, 88.6%, 86.2%, and 18% yields of the products, respectively, while catechol and resorcinol polymerized. Oxidation of aldehydes and alcohols resulted as usual in the corresponding acids and aldehydes, respectively, while p-xylene and p-nitrotoluene gave p-tolualdehyde and p-nitrobenzoic acid. Conditions were obtained for getting the highest yields under the experimental conditions.     

Synthesis of stable cadmium sulfide nanoparticles using surfactin produced by Bacillus amyloliquifaciens strain KSU-109

In this study, a surfactin was extracted from a novel surfactant producing bacterial strain Bacillus amyloliquifaciens KSU-109, isolated from rhizosphere of date palm (Phoenix dactylifera), and characterized based on 16Sr RNA and sfp genes using Blastn, Blastx and phylogenetic analyses. The study was performed to obtain a renewable bioresource for surfactin production, and its application in nanotechnology as a non-hazardous and environmentally compatible nanoparticle (NP) stabilizer. The strain KSU-109 produced the surfactin with an average yield of 160 mg/L with strong surfactant activity, reducing the surface tension of the medium from 72 mN/m to 29.3 mN/m. The surfactin preparation was used for synthesizing the cadmium sulfide nanoparticles (CdS-NPs) by mixing 0.005% surfactin with 1mM Cd(NO(3))(2) in 1:1 ratio (v/v) and 10mM Na(2)S solution at pH 7.2 and ambient temperature, which were stable up to 120 days. The surfactin stabilized CdS-NPs were characterized using XRD, TEM, and spectroscopic techniques. The data revealed a significant role of surfactin as a stabilizer and capping agent, which also causes phase transition to yield the cubic/hexagonal CdS-NPs of average size of 3-4 nm. The results elucidated the significance of biocompatible and biodegradable surfactin as an effective and inexpensive stabilizing agent for developing stable CdS nanoparticles.     

Gd3+ Sensitized Enhanced Green Luminescence in Gd:Tb(Sal)3Phen Complex in PVA

Ternary and tertiary complexes of Tb(Sal)(3)Phen and Gd:Tb(Sal)(3)Phen were synthesized and characterized in PVA polymer. The structural properties of these systems were evaluated on the basis of NMR and FT-IR techniques. The absorption, excitation and emissive properties of the Tb(3+) ion were improved when coordinated with Sal and Phen ligands. Photoluminescence properties of the complexes in solution, crystals and dispersed in PVA film were explored in steady state and in time domain. Selective excitations (487, 355, 310 and 266 nm) of Tb(3+), Sal and Gd(3+) ions reveal an intramolecular energy transfer process. The emission of Gd:Tb(Sal)(3)Phen complex in PVA indicates the contribution of Gd(3+) ion to enhance the emission intensity of Tb(3+) ion. On the basis of these investigations, photophysics was widely discussed in terms of energy transfer and encapsulation effect.     

Controlled pesticide release from biodegradable polymers

Polymers have been widely used in agriculture for applications including controlled release of pesticides and other active ingredients. The ability to predict their delivery helps avoid environmental hazards. Macromolecular matrices used as carriers in controlled release of agricultural active agents, especially pesticides, are reviewed. The review focuses on the advantages and mechanisms of controlled release. It includes biodegradable polymers in agriculture, their manufacturing methods, and their degradation mechanisms and kinetics. The article also presents a critical account of recent release studies and considers upcoming challenges.      

Iridium(III) catalyzed oxidation of cyclic ketones by cerium(IV)

IrCl₃which is considered to be a sluggish catalyst in alkaline media, was found to surpass the catalytic efficiency of even osmium and ruthenium in acidic media in the oxidation of cyclopentanone and 2-methylcyclohexanone by cerium(IV) sulphate in aqueous sulphuric acid medium. It was observed that the order of the reaction shows direct proportionality with respect to low concentrations of the oxidant and alcohols, but tends to become independent of concentration at higher concentrations. On increasing the concentrations of externally added Cl^-, H⁺ and Ce^IIIions, the rate of the reaction decreases sharply initially but the decrease in rate becomes less prominent as their concentration is increased. The rate of reaction is directly proportional with respect to IrCl₃concentrations. Kinetic data suggest that the production of Ce^III ion occurs before the rate-determining step. Parameters such as the energy of activation, free energy of activation and entropy data collected at five different temperatures suggest that cyclopentanone forms the activated complex more easily.     

High pressure studies on α-cristobalite form of Al0.5Ga0.5PO4: hydrostatic versus non-hydrostatic conditions

High pressure angle-dispersive X-ray diffraction investigations have been carried out on α-cristobalite form of Al_0.5Ga_0.5PO₄. Our investigations show that the structural stability of this phase under high pressure depends on the nature of pressure conditions in the diamond anvil cell. Under hydrostatic pressure conditions using neon as a pressure transmitting medium, ambient orthorhombic C222₁ phase transforms to orthorhombic Cmcm phase at 4.9?GPa. The high pressure Cmcm phase remains stable up to the highest pressure in the experiment, i.e. 19?GPa. The values of bulk modulus for C222₁ and Cmcm phases are 19(2) and 126(4)?GPa, respectively. In contrast to this, under non-hydrostatic pressure conditions, transformation of ambient C222₁ phase to Cmcm phase has not observed up to 17.4?GPa. Instead, a new monoclinic phase P2₁ is observed which contains layers of six coordinated Al/Ga ions separated by less dense five coordinated Al/Ga ions.     

Characterization of a distributed plasma ionization source (DPIS) for ion mobility spectrometry and mass spectrometry

A recently developed atmospheric pressure ionization source, a distributed plasma ionization source (DPIS), was characterized and compared to commonly used atmospheric pressure ionization sources with both mass spectrometry (MS) and ion mobility spectrometry (IMS). The source consisted of two electrodes of different sizes separated by a thin dielectric. Application of a high RF voltage across the electrodes generated plasma in air yielding both positive and negative ions. These reactant ions subsequently ionized the analyte vapors. The reactant ions generated were similar to those created in a conventional point-to-plane corona discharge ion source. The positive reactant ions generated by the source were mass identified as being solvated protons of general formula (H₂O)_nH⁺ with (H₂O)₂H⁺ as the most abundant reactant ion. The negative reactant ions produced were mass identified primarily as CO₃⁻, NO₃⁻, NO₂⁻, O₃⁻ and O₂⁻ of various relative intensities. The predominant ion and relative ion ratios varied depending upon source construction and supporting gas flow rates. A few compounds including drugs, explosives and amines were selected to evaluate the new ionization source. The source was operated continuously for 3 months and although surface deterioration was observed visually, the source continued to produce ions at a rate similar that of the initial conditions.     

Assessing efficiency of public health and medical care provision in OECD countries after a decade of reform

Central European Journal of Operations Research - The objective of this study was to examine the change in efficiency of health care systems of 34 OECD countries between 2000 and 2012, a period...     

Emerging Strategies in Stimuli-Responsive Silk Architectures

The utilization of implantable devices beseeches highly invasive surgeries considering the adversaries in the insertion of large, impliable devices through the body channels, which necessitate the development of implantable devices using biocompatible shape memory polymers. Silk displays prodigious heterogeneity in its genetic structure and physical properties in accordance with the spinning and storage process, where proteins undergo folding and unfolding. The stimuli-responsive nature of silk can be explained with the help of the structural morphology and composition of the material, where the hydrogen bonds in β-sheet domains and amorphous region act as switch points and net points, respectively. This review provides a primary attempt to enswathe all the literature available to date on the stimuli-responsive nature of silk and silk-based materials as a natural and biodegradable alternative for commercially used synthetic shape memory materials taking their elastomeric nature and reduction in glass transition temperature into account. Further constitutive model using the continuum approach has been utilized to explain the anisotropic elasticity damping effect and plastic deformation based on the α-helix chains, β-sheets, and β-spiral structures. The practicability to develop biomedical devices such as patient-specific-injectable scaffolds, drug carriers, and artificial muscles has been encompassed in this article.