Spectrafluorimetric method for the rapid screening of toxic heavy metals in water samples

A fast and inexpensive sensitive screening test for recognising potential wastewater contamination by the presence of highly toxic heavy metals is described. The test is based on the reaction of the toxic heavy metals Hg(II), Cd(II), Pb(II) and Ag(I) with 6-mercaptopurine (6-MP) to produce highly fluorescent complexes.Optimum experimental conditions include a buffer of pH 7.2 (0.1 M citric acid/0.2 M Na₂HPO₄), a chelating reagent concentration of 6×10⁻⁴ M and the addition of 10⁻⁴ M of o-phenanthroline. The fluorescence emitted by the complexes was measured at 380 and 540 nm for excitation and emission wavelengths, respectively.Detection limits of 4, 3, 6 and 3 μg l⁻¹ were achieved for Hg, Cd, Pb and Ag. Relative standard deviation (R.S.D.) were between ±2 and ±6% of the fluorescence signals for five identical samples. Potential interference effects from other heavy metals (Zn, Mn, Co, Fe, Ni and Cu), which could affect the response of the proposed screening test was investigated. Results showed that none of these metals give rise to noticeable fluorescence signals under the above described experimental conditions.Finally, the capability of the proposed heavy metal screening test for the analysis of contaminated water samples is discussed.     

Flow injection-spectrophotometric determination of cresol compounds in water by reaction withp-aminophenol

A spectrophotometric method has been developed for the simultaneous determination ofo-cresol andm-cresol in water by reaction withp-aminophenol (PAP). Three different methodologies have been assayed; (i) batch analysis, after reaction in an alkaline medium in the presence of dissolved molecular oxygen as oxidizing agent, (ii) a stopped-flow procedure, carried out in the presence of KIO₄ and (iii) a flow injection method based on the same approach. The batch procedure requires 22 min for the full development of colour witho-cresol and 12 min form-cresol. In the stopped-flow mode, using KIO₄ and a reaction time of 12 min, better sensitivity can be obtained for both compounds and limits of detection of 10 g 1^–1 foro-cresol and 30 g 1^–1 form-cresol were found. The flow injection method has a lower sensitivity but permits more than 80 injections per hour. Based on the different maximum absorbance wavelengths obtained for the reaction products of PAP witho-cresol (614 nm) andm-cresol (632 nm), both compounds can be simultaneously determined in water samples and recoveries of 90 to 115% were found in spiked water samples of different types.     

Room-temperature liquid phosphorimetry of the aluminium-ferron chelate in micellar media : Determination of aluminium

Aluminium reacts with 7-iodo-8-quinolinol-5-sulphonic acid (Ferron) in cetyltrimethylammonium bromide (CTAB) micelles to form a highly phosphorescent complex at room temperature. Suitable experimental conditions and the phosphorescent characteristics of the complex are described. Comparison with the results obtained for the phosphorescent niobium-Ferron complex in CTAB micelles helps to elucidate the mechanism of this type of phosphorescence. For aluminium the detection limit is 5.4 ng ml^?1; the relative standard deviation is 4.5% for 20 μg Al. The method is applied to aluminium determination in waters and dialysis fluids.     

Asymptotically independent topological indices on random trees

Topological indices are graph invariants used in computational chemistry to encode molecules. A frequent problem when performing structure-activity studies is that topological indices are inter-correlated. We consider a simple topological index and show asymptotic independence for a random tree model. This continues previous work on the correlation among topological indices. These findings suggest that a size-dependence in a certain class of distance-based topological indices can be eliminated.AMS subject classification: 05C80, 60E10, 92E10     

Palladium-catalyzed, stereoselective rearrangement of a tetracyclic allyl cyclopropane under arylation

The first example of a pi,sigma domino-Heck reaction under concomitant rearrangement of the tetracyclic allylcyclopropane endo,exo-bishomobarrelene (5) is reported; the stereoselective reaction proceeds via an intramolecular insertion of a primarily-formed carbopalladation intermediate into a strained cyclopropane C-C sigma-bond, giving 9.     

Ag(I) complexes with alkylidene-bis(2-aminopyrimidines) as building units for discrete metallomacrocyclic frames. A structural and solution study

Alkylidene-bis(2-aminopyrimidines) (pyr2Cx, x = 2-5) are useful ligands to interact with Ag(I) yielding discrete metallocycles. Crystal structures of the [(pyr2C2)Ag(NO3)]2 and [(H-pyr2C4)Ag(NO3)2]2 have been isolated where each macrocyclic moiety interacts with their surroundings through weak interactions, yielding 3D discrete structures, On the other hand, the solution study shows that the equilibrium constants for the formation of Ag(pyr2Cx)+ complexes are higher than the literature values for Ag(I) complexes with single pyrimidines, although the differences could be explained by invoking the solid-state structures of the Ag(I)-pyr2Cx complexes.     

Synthesis,Spectroscopic and EPR Results and Crystal Structure of Copper(II) Formato Derivatives with Pyrazine and Dimethylpyrazines

The complexes of copper formato with pyrazine and dimethylpyrazines: Cu(HCOO)₂(pyrz) ( 1 ), Cu₂(HCOO)₄(pyrz) ( 2 ), Cu₂(HCOO)₄(2,3‐Me₂pyrz) ( 3 ), Cu₂(HCOO)₄(2,5‐Me₂pyrz) ( 4 ), and Cu₂(HCOO)₄(2,6‐Me₂pyrz)₂ ( 5 ) have been synthesized and characterized by chemical analysis and IR and electronic spectro scopies. The three‐dimensional structure of compound 1 consists of –Cu–pyrz–Cu–pyrz– chains joined by bridging formate groups coordinated, in configuration syn‐anti, to two copper atoms. The coordination around the copper atom is orthorhombic with two Cu–O distances of 2.374(1) Å, two Cu–O of 1.952 Å and two Cu–N of 2.080 Å. Compound 5 is formed by molecular dimers with the [Cu₂(μ‐HCOO)₄] unit, two copper atoms and four syn‐syn fomate groups, and two ligands coordinated to the copper atoms in the axial positions. In compounds 2 and 3 chains of [Cu₂(μ‐HCOO)₄] dimers with pyrz or 2,3‐Me₂pyrz as bridging ligands are formed. The EPR signal of 1 is orthorhombic (g = 2.23, 2.20 and 2.06). In the EPR spectra of 2 – 5 compounds the triplet (S = 1) signals are observed. The g_?, g_∥ and D values are been calculated.     

Determination of mercury in soils and sediments by graphite furnace atomic absorption spectrometry with slurry sampling

A graphite furnace atomic absorption spectrometric procedure for the determination of mercury is presented, in which the samples are suspended in a solution containing hydrofluoric and nitric acids. Silver nitrate (4% m/v) and potassium permanganate (3%) are incorporated, in the order specified, and aliquots are directly introduced into the graphite furnace. A fast heating programme with no conventional pyrolysis step is used. The detection limit for mercury in a 125 mg ml⁻¹ suspension is 0.1 μg g⁻¹. Calibration is performed by using aqueous standards. The reliability of the procedure is proved by analysing certified reference materials.     

Application of capillary isotachophoresis in peptide analysis

This paper gives a broad and detailed review of the applications of one of the modern high-performance electromigration separation techniques--capillary isotachophoresis (ITP)--in peptide analysis. Examples are presented of the utilization of capillary ITP for peptide analysis in the fields of chemistry, general and clinical biochemistry, biology, biotechnology, pharmacy and the food industry. The complete composition of all the electrolyte systems used for peptide ITP analyses in both cationic and anionic techniques is given in tabular form. According to the purpose of analysis the applications are divided into several sections: model studies, determination of physico-chemical characteristics, purity control of both intermediate and final peptide preparations, including the determination of low-molecular-mass ionogenic admixtures, and the analysis of peptides in biological fluids and tissue extracts. In addition to the main applications the theoretical and methodological aspects of peptide ITP analysis are discussed. The basic electromigration properties of peptides (their polyampholyte character, effective and absolute mobilities, acid-base equilibria) are explained and the selection of parameters for peptide ITP analysis is described in detail. The advantages and disadvantages of ITP compared with other electrophoretic and chromatographic methods used for peptide analysis are discussed.