The Fundamental Experiments of Red Tide Chemical Forecast

Many food algae and red tide algae were cultivated in the f/2 medium, and the nitric oxide (NO) concentration of the medium and the cell density were determined. The experiments on algae were conducted when different concentrations of NO were added into the medium using two methods. The results show that low concentrations of NO were self-produced by marine algae during the exponential growth period and were about nmol/L level. But at the end of the period, i.e., 2 or 3 days before the cell density reaches the maximum, an NO peak appeared, with the NO concentration reaching 10 nmol/L. The NO threshold concentration exists according to the influence of exogenous NO on the marine phytoplankton growth. One type is the threshold concentration that can promote algae growth, and its value is between 10 and 1 nmol level, or even lower. The other type can inhibit the phytoplankton growth, which is about μmol level or higher. The results indicate that red tide algae are far more sensitive to NO than are food algae. The fundamental experimental outcome above may provide a new clue for red tide chemical forecast by inspecting the NO change.     

关于Echelon空间无穷矩阵变换集的有界性

无穷矩阵变换是研究序列空间理论的重要工具.研究一个空间到另一个空间无穷矩阵变换的形式,是序列空间理论中的重要内容,并且已有众多工作.本文将进一步研究一般的Echelon空间到空间l^p(1≤p≤∞),c、c₀的无穷矩阵变换集的有界性.所得结果的特例正是Echelon空间到l^p(1≤p≤∞)c、c₀无穷矩阵变换的形式,同时概括了前人的许多结果.     

OSCILLATION FOR SOLUTIONS OF SYSTEMS OF N-TH ORDER PARTIAL FUNCTIONAL DIFFERENTIAL EQUATIONS

In this paper, some sufficient conditions for the oscillation for solutions to systems of n-th order partial functional differential equations are obtained.     

ULTIMATE BOUNDEDNESS FOR A DIFFERENTIAL DELAY MODEL

This paper considers the scalar differential delay equation x(t) = -μx(t)-f(x(t-Τ(t)), t). By using the mapping method we obtain that the solutionswill be ultimately in some interval.     

Broadband spectral shaping in a Ti:sapphire regenerative amplifier

A birefringent crystal quartz plate of known thickness has been used as a spectral filter for spectral shaping in a Ti:sapphire regenerative amplifier. The spectral profile of the amplified pulse ejected from the regenerative amplifier was observed while adjusting the birefringent crystal plate in the cavity. By altering the gain spectrum, the bandwidth of the regeneratively amplified pulse was increased from 18 to 35 nm by using a 0.34-mm thick birefringent plate. The output pulse spectrum from the regenerative amplifier neared the bandwidth of the seed pulse. As a comparison, we used a coated filter outside the regenerative amplifier cavity, and the bandwidth of the regeneratively amplified pulse was stretched to 28 nm. When the bandwidth was stretched to 35 nm, the pulse was compressed to 35 fs.     

Kinetics of phenyl radical reactions with propane,n‐butane,n‐hexane,and n‐octane: Reactivity of C6H5 toward the secondary C?H bond of alkanes

The kinetics of C₆H₅ reactions with n‐C_nH_2n+2 (n = 3, 4, 6, 8) have been studied by the pulsed laser photolysis/mass spectrometric method using C₆H₅COCH₃ as the phenyl precursor at temperatures between 494 and 1051 K. The rate constants were determined by kinetic modeling of the absolute yields of C₆H₆ at each temperature. Another major product C₆H₅CH₃ formed by the recombination of C₆H₅ and CH₃ could also be quantitatively modeled using the known rate constant for the reaction. A weighted least‐squares analysis of the four sets of data gave k (C₃H₈) = (1.96 ± 0.15) × 10¹¹ exp[?(1938 ± 56)/T], and k (n‐C₄H₁₀) = (2.65 ± 0.23) × 10¹¹ exp[?(1950 ± 55)/T] k (n‐C₆H₁₄) = (4.56 ± 0.21) × 10¹¹ exp[?(1735 ± 55)/T], and k (n?C₈H₁₈) = (4.31 ± 0.39) × 10¹¹ exp[?(1415 ± 65)T] cm³ mol^?1 s^?1 for the temperature range studied. For the butane and hexane reactions, we have also applied the CRDS technique to extend our temperature range down to 297 K; the results obtained by the decay of C₆H₅ with CRDS agree fully with those determined by absolute product yield measurements with PLP/MS. Weighted least‐squares analyses of these two sets of data gave rise to k (n?C₄H₁₀) = (2.70 ± 0.15) × 10¹¹ exp[?(1880 ± 127)/T] and k (n?C₆H₁₄) = (4.81 ± 0.30) × 10¹¹ exp[?(1780 ± 133)/T] cm³ mol^?1 s^?1 for the temperature range 297‐‐1046 K. From the absolute rate constants for the two larger molecular reactions (C₆H₅ + n‐C₆H₁₄ and n‐C₈H₁₈), we derived the rate constant for H‐abstraction from a secondary C? H bond, k_s?CH = (4.19 ± 0.24) × 10¹⁰ exp[?(1770 ± 48)/T] cm³ mol^?1 s^?1. © 2003 Wiley Periodicals, Inc. Int J Chem Kinet 36: 49–56, 2004     

纳米尺寸的ZnO晶体高压相变的拉曼散射研究(英文)

Weperformedthehigh-pressureRaman measurementofthethreenanosizedZnOcrystals. Wefoundthesmallerthesize,thehigherthe pressuretoinducethephasetransitionfrom w櫣rzitetorock-saltstructure. High-pressureRamanmeasurementsof nona-shapedZnOcrystalswerepreformed.The…     

Synthesis and characterization of liquid crystalline side‐chain block copolymers containing luminescent 4,4′‐bis(biphenyl)fluorene pendants

A series of new liquid crystalline homopolymers, copolymers, and block copolymers were polymerized from styrene‐macroinitiator ( SMi ) and methacrylates with pendent 4,4′‐bis(biphenyl)fluorene ( M1 ) and biphenyl‐4‐ylfluorene ( M2 ) groups through atom transfer radical polymerization (ATRP). The number‐average molecular weights (Mn) of polymers P1 ‐ P4 were 10,007, 14,852, 6,275, and 10,463 g mol^?1 with polydispersity indices values of 1.21, 1.15, 1.31, and 1.22, respectively. All polymers exhibit the nematic phase. The thermal, mesogenic, and photoluminescent properties of all polymers were investigated. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4564–4572, 2007     

Optimal shape design for packaging containing heating elements by inverse heat transfer method

The present study is concerned with the determination of the optimal shape for a package containing multiple heating elements. The optimization tool has been developed based on the inverse heat transfer (IHT) approach, incorporating a direct problem solver, a numerical grid generator, a direct-differentiation sensitivity analyzer, and the conjugate gradient method. Shape design that leads to a specified outer surface temperature distribution is predicted by the approach. In this study, the effects of internal heat generation on optimal shapes of the packagings have also been evaluated. Several practical cases with various imbedded heating elements and thermal conditions are studied. Results show that the approach provides an efficient computer-aided design scheme for the shape profile determination.