Correlation of the EPR properties of perchlorotriphenylmethyl radicals and their efficiency as DNP polarizers

Water soluble perchlorinated trityl (PTM) radicals were found to be effective 95 GHz DNP (dynamic nuclear polarization) polarizers in ex situ (dissolution) (13)C DNP (Gabellieri et al., Angew Chem., Int. Ed. 2010, 49, 3360). The degree of the nuclear polarization obtained was reported to be dependent on the position of the chlorine substituents on the trityl skeleton. In addition, on the basis of the DNP frequency sweeps it was suggested that the (13)C NMR signal enhancement is mediated by the Cl nuclei. To understand the DNP mechanism of the PTM radicals we have explored the 95 GHz EPR characteristics of these radicals that are relevant to their performance as DNP polarizers. The EPR spectra of the radicals revealed axially symmetric g-tensors. A comparison of the spectra with the (13)C DNP frequency sweeps showed that although the solid effect mechanism is operational the DNP frequency sweeps reveal some extra width suggesting that contributions from EPR forbidden transitions involving (35,37)Cl nuclear flips are likely. This was substantiated experimentally by ELDOR (electron-electron double resonance) detected NMR measurements, which map the EPR forbidden transitions, and ELDOR experiments that follow the depolarization of the electron spin upon irradiation of the forbidden EPR transitions. DFT (density functional theory) calculations helped to assign the observed transitions and provided the relevant spin Hamiltonian parameters. These results show that the (35,37)Cl hyperfine and nuclear quadrupolar interactions cause a considerable nuclear state mixing at 95 GHz thus facilitating the polarization of the Cl nuclei upon microwave irradiation. Overlap of Cl nuclear frequencies and the (13)C Larmor frequency further facilitates the polarization of the (13)C nuclei by spin diffusion. Calculation of the (13)C DNP frequency sweep based on the Cl nuclear polarization showed that it does lead to an increase in the width of the spectra, improving the agreement with the experimental sweeps, thus supporting the existence of a new heteronuclear assisted DNP mechanism.     

Development and validation of a GC-MS method for rapid determination of galanthamine in Leucojum aestivum and Narcissus ssp.: a metabolomic approach

Galanthamine, an acetylcholinesterase inhibitor marketed as a hydrobromide salt for the treatment of Alzheimer's disease, is obtained from some Amaryllidaceae plants. A new method was developed and validated for its quantification by GC-MS in different plant sources: bulbs and leaves from Narcissus confusus; bulbs from N. pseudonarcissus cv. Carlton; and leaves and in vitro cultures from L. aestivum. Samples (50 mg) were extracted with methanol (1 mL) for 2 h, then aliquots of the extracts were silylated and analyzed by GC-MS. The calibration line was linear over a range of 15-800 μg galanthamine/sample, ensuring an analysis of samples with a content of 0.03-1.54% analyte referred to dry weight. The recovery was generally more than 95%. Good inter- and intra assay precision was observed (RSD < 3%). Principal component analysis of GC-MS chromatograms allowed discrimination of the plant raw material with respect to species, organs and geographical regions. The analytical method developed in this study proved to be simple, sensitive and far more informative than the routine analytical methods (GC, HPLC, CE and NMR), so it may be useful for quality control of plant raw materials in the pharmaceutical industry.     

HOMO Stabilisation in π‐Extended Dibenzotetrathiafulvalene Derivatives for Their Application in Organic Field‐Effect Transistors

Three new organic semiconductors, in which either two methoxy units are directly linked to a dibenzotetrathiafulvalene (DB‐TTF) central core and a 2,1,3‐chalcogendiazole is fused on the one side, or four methoxy groups are linked to the DB‐TTF, have been synthesised as active materials for organic field‐effect transistors (OFETs). Their electrochemical behaviour, electronic absorption and fluorescence emission as well as photoinduced intramolecular charge transfer were studied. The electron‐withdrawing 2,1,3‐chalcogendiazole unit significantly affects the electronic properties of these semiconductors, lowering both the HOMO and LUMO energy levels and hence increasing the stability of the semiconducting material. The solution‐processed single‐crystal transistors exhibit high performance with a hole mobility up to 0.04 cm² V^?1 s^?1 as well as good ambient stability.     

Synthesis of amphidinolide Y precursors

The Negishi coupling between a chiral C3 synthon and an iodoalkene arising from 3-butyn-1-ol, which gave the C3–C9 fragment of amphidinolide Y, was the starting point of a formal total synthesis of this marine natural product. By means of Sharpless ADH and TADDOL-mediated crotylation, the full western fragment (C1–C11) was obtained, which was coupled with the eastern fragment (3-hydroxyoxolane derivative). The penultimate step (ring-closing metathesis, with G-II, H–G-II, or Nitro-Grela reagents, under several conditions) posed great difficulties. The cyclization was achieved with 15c (7,9-bis-O-TES) and 15d (7-O-TES, 9-O-TBS); more than stoichiometric amounts of the H–G-II Ru complex were required for complete conversion.     

Optical Mechanotransduction with Carbazole‐Based Luminescent Liquid Single‐Crystal Elastomers

Carbazole‐based liquid single‐crystal elastomers (LSCEs) are valuable fluorescent flexible materials to perform optical mechanotransduction under ambient conditions. Indeed, the covalent incorporation of carbazole derivatives into nematic LSCEs allows to tune their luminescence on demand under mechanical control in a quick and reversible fashion. Specifically, the fluorescence intensity for these materials can be switched back and forth in less than a second. Moreover, such a process can be performed several times without detecting any sign of fatigue in the system. In addition, these materials show excellent resistance to aging; 2 years after their preparation they exhibit the very same mechanofluorescent behavior as when freshly prepared. In fact, the here reported fluorescent systems are highly sensitive; the application of a force of 70 mN decreases the fluorescence in the elastomeric material by 7%. Thus, mechanical forces are attractive external stimuli to modulate the fluorescence of nematic elastomers rapidly and reversibly enabling thereby mechanotransduction.

     

Nucleophilic β‐Carbon Activation of Propionic Acid as a 3‐Carbon Synthon by Carbene Organocatalysis

Direct β‐carbon activation of propionic acid (C₂H₅CO₂H) by carbene organocatalysis has been developed. This activation affords the smallest azolium homoenolate intermediate (without any substituent) as a 3‐carbon nucleophile for enantioselective reactions. Propionic acid is an excellent raw material because it is cheap, stable, and safe. This approach provides a much better solution to azolium homoenolate synthesis than the previously established use of acrolein (enal without any substituent), which is expensive, unstable, and toxic.     

Cyclometallated platinum(II) compounds with imine ligands derived from amino acids: Synthesis and oxidative addition reactions

The reactions of [PtMe₂(μ-SMe₂)]₂ with imines 4-ClC₆H₄CHNCHRCO₂Me (R = H (1a), Me (1b), ⁱPr (1c), CH₂C₆H₄(4’-OH) (1d), C₆H₅ (1e), CH₂C₆H₅(1f)) derived from natural amino acids produced under mild conditions cyclometallated platinum(II) compounds [PtMe{κ²-(C,N)-4-ClC₆H₃CHNCHRCO₂Me}(SMe₂)] (2a-2f). These compounds gave the corresponding phosphine derivatives [PtMe{κ²-(C,N)-4-ClC₆H₃CHNCHRCO₂Me}(PPh₃)] (3a-3f). The corresponding cyclometallated platinum(IV) compounds [PtMe₂I{κ²-(C,N)-4-ClC₆H₃CHNCHRCO₂Me}(PPh₃)] (4) arising from intermolecular oxidative addition of methyl iodide were obtained with a high degree of stereo selectivity. Analogous results were obtained for imine 2,6-Cl₂C₆H₃CHNCH(CH₂C₆H₅)CO₂Me (1g) in a process involving intramolecular oxidative addition of a C-Cl bond. The obtained compounds were fully characterized including structure determinations for compounds 3f, 4d and 4f.     

Coexistence of ferro- and antiferromagnetic interactions in a metal-organic radical-based (6,3)-helical network with large channels

A metal-organic open-framework with an unprecedented (6,3)-helical topology, large channels and mixed ferro- and antiferromagnetic interactions has been synthesized using a three-connecting tricarboxylic polychlorotriphenylmethyl radical and Co(ii) ions.     

Ion binding to polyelectrolytes: Monte Carlo simulations versus classical mean field theories

The influence of ion size and surface charge model in titrations of ionizable polyelectrolytes is studied by means of the Semi Grand Canonical Monte Carlo simulation method in the context of the primitive model. Three models describing a discrete distribution of charged functional groups on the polyelectrolyte and different values for the radius of the background electrolyte spanning from ionic to hydrated radii values were analyzed. The polyelectrolyte titrations were simulated by calculating the degree of ionization versus pH curves at two ionic strengths. The results allow us to quantify the impact of the sizes of the background salt ions and surface functional groups of the polyelectrolyte on the dissociation degree. This influence is explained in terms of the effectiveness of the screening of the charged surface sites. Finally, by comparison with the Non-Linear Poisson–Boltzmann model, the influence of ionic correlations and finite size of the solution ions is assessed.