A study of method robustness for arsenic speciation in drinking water samples by anion exchange HPLC-ICP-MS

Regulating arsenic species in drinking waters is a reasonable objective, since the various species have different toxicological impacts. However, developing robust and sensitive speciation methods is mandatory prior to any such regulations. Numerous arsenic speciation publications exist, but the question of robustness or ruggedness for a regulatory method has not been fully explored. The present work illustrates the use of anion exchange chromatography coupled to ICP-MS with a commercially available "speciation kit" option. The mobile phase containing 2 mM NaH(2)PO(4) and 0.2 mM EDTA at pH 6 allowed adequate separation of four As species (As(III), As(V), MMAA, DMAA) in less than 10 min. The analytical performance characteristics studied, including method detection limits (lower than 100 ng L(-1) for all the species evaluated), proved the suitability of the method to fulfill the current regulation. Other parameters evaluated such as laboratory fortified blanks, spiked recoveries, and reproducibility over a certain period of time produced adequate results. The samples analyzed were taken from water utilities in different areas of the United States and were provided by the U.S. EPA. The data suggests the speciation setup performs to U.S. EPA specifications but sample treatment and chemistry are also important factors for achieving good recoveries for samples spiked with As(III) as arsenite and As(V) as arsenate.     

Investigations into the parallel kinetic resolution of 2-phenylpropanoyl chloride using quasi-enantiomeric oxazolidinones

The resolution of 2-phenylpropanoyl chloride using an equimolar combination of quasi-enantiomeric oxazolidinones is discussed. The levels of diastereoselectivity were found to be dependent upon the structural nature of the metallated oxazolidinone, temperature and metal counter-ion.     

Cyclopentadiene annulated polycyclic aromatic hydrocarbons: investigations of electron affinities

The adiabatic electron affinities of cyclopentadiene and 10 associated benzannelated derivatives have been predicted with both density functional and Hartree-Fock theory. These systems can also be regarded as benzenoid polycyclic aromatic hydrocarbons (PAHs) augmented with five-membered rings. Like the PAHs, the electron affinities of the present systems generally increase with the number of rings. To unequivocally bind an electron, cyclopentadiene must have at least two conventionally fused benzene rings. 1H-Benz[f]indene, a naphthalene-annulated cyclopentadiene, is predicted to have a zero-point energy corrected adiabatic electron affinity of 0.13 eV. Since the experimental E(A) of naphthalene is negative (-0.19 eV), the five-membered ring appendage contributes to the stability of the naphthalene-derived 1H-benz[f]indene radical anion significantly. The key to binding the electron is a contiguous sequence of fused benzenes, since fluorene, the isomer of 1H-benz[f]indene, with separated six-membered rings, has an electron affinity of -0.07 eV. Each additional benzene ring in the sequence fused to cyclopentadiene increases the electron affinity by 0.15-0.65 eV: the most reliable predictions are cyclopentadiene (-0.63 eV), indene (-0.49 eV), fluorene (-0.07 eV), 1H-benz[f]indene (0.13 eV), 1,2-benzofluorene (0.25 eV), 2,3-benzofluorene (0.26 eV), 12H-dibenzo[b,h]fluorene (0.65 eV), 13H-indeno[1,2-b]anthracene (0.82 eV), and 1H-cyclopenta[b]naphthacene (1.10 eV). In contrast, if the six-membered ring-fusion is across the C(2)-C(3) cyclopentadiene single bond, only a single benzene is needed to bind an electron. The theoretical electron affinity of the resulting molecule, isoindene, is 0.49 eV, and this increases to 1.22 eV for 2H-benz[f]indene. The degree of aromaticity is responsible for this behavior. While the radical anions are stabilized by conjugation, which increases with the size of the system, the regular indenes, like PAHs in general, suffer from the loss of aromatic stabilization in forming their radical anions. While indene is 21 kcal mol(-1) more stable than isoindene, the corresponding radical anion isomers have almost the same energy. Nucleus-independent chemical shift calculations show that the highly aromatic molecules lose almost all aromaticity when an extra electron is present. The radical anions of cyclopentadiene and all of its annulated derivatives have remarkably low C-H bond dissociation energies (only 18-34 kcal mol(-1) for the mono-, bi-, and tricyclics considered). Hydrogen atom loss leads to the restoration of aromaticity in the highly stabilized cyclopentadienyl anion congeners.     

Single nanocrystal arrays on patterned poly(ethylene glycol) copolymer microstructures using selective wetting and drying

Single nanocrystal arrays were fabricated on sub-microwells of poly(ethylene glycol) (PEG) copolymer using selective wetting on the hydrophilic regions of the exposed substrate surface and subsequent drying. Templates were produced by molding a thin film of a PEG-based random copolymer on hydrophilic substrates such as glass or silicon dioxide. The polymeric microstructures provide a topographical barrier around the well, which makes it possible to create nanocrystal arrays with controlled geometrical features. The size of the nanocrystal was found to decrease with decreasing well size and also decrease with decreasing topological height. A simple empirical equation was derived to predict the size of the crystal as a function of the pattern size and height, which is in good agreement with the experimental data.     

Recent advances in the activation of boron and silicon reagents for stereocontrolled allylation reactions

Despite the popularity of boron and silicon allylation reagents in stereocontrolled synthesis, they suffer from a number of inherent limitations that have slowed down their development as synthetic tools for nucleophilic additions to carbonyl compounds and imine derivatives. These limitations are the low reactivity and diastereoselectivity of allyl trialkylsilane reagents, and the lack of catalytic systems for the activation and substoichiometric control of enantioselectivity in the additions of allyl boron reagents. To develop more efficient and general methods for the control of absolute stereochemistry in the resulting homoallylic alcohols, new approaches aimed at solving the problem of activation of allylic boron and silicon reagents are needed. This Minireview describes a number of recent approaches that have been devised to address this problem.     

Seasonal fluctuation of DNA photodamage in marine plankton assemblages at Palmer Station, Antarctica

Ultraviolet radiation-induced DNA damage frequencies were measured in DNA dosimeters and natural plankton communities during the austral spring at Palmer Station, Antarctica, during the 1999-2000 field season. We found that the fluence of solar ultraviolet-B radiation (UV-B) at the earth's surface correlated with stratospheric ozone concentrations, with significant ozone depletion observed because of "ozone hole" conditions. To verify the interdependence of ozone depletion and DNA damage in natural microbial communities, seawater was collected daily or weekly from Arthur Harbor at Palmer Station, Antarctica, throughout "ozone season," exposed to ambient sunlight between 0600 and 1800 h and fractionated using membrane filtration to separate phytoplankton and bacterioplankton populations. DNA from these fractions was isolated and DNA damage measured using radioimmunoassay. Under low-ozone conditions cyclobutane dimer concentrations in bacterioplankton and phytoplankton communities were maximal. DNA damage measured in dosimeters correlated closely with ozone concentrations and UV-B fluence. Our studies offer further support to the theory that stratospheric deozonation is detrimental to marine planktonic organisms in the Southern Ocean.     

Synthesis and characterization of monodisperse magnetic composite particles for magnetorheological fluid materials

Monodisperse magnetic composite particles (MCP) were prepared and characterized for a study of magnetic field-responsive fluids. Magnetic composite particles used are iron oxide-coated polymer composite particles, which were synthesized through in situ coating of iron oxide onto pre-existing polymer particles by the reduction of ferrous fluids. For a uniform and bulk coating of iron oxide, the porous structure was introduced into the substrate polymer particles through a two-step seeded polymerization method. Moreover, surface cyano-functionality was born from acrylonitrile unit of substrate polymer and it played an important role in obtaining successful uniform coating. The structure of the composite particle was analyzed by using a thermo gravimetric analysis (TGA) and a X-ray diffraction (XRD) analysis. The magnetization property of the particle was also observed. Then, the rheological properties of monodisperse magnetorheological (MR) suspensions of magnetic composite particles were examined under a magnetic field using a parallel-plate type commercial rheometer. From the rheological measurements, it was found that MR properties of the magnetic composite suspensions are dependent on the iron oxide content and the fluid composition.     

Chemosensors for the marine toxin saxitoxin

Eleven anthracylmethyl crown ethers have been synthesized and evaluated as fluorescence sensors for the marine toxin saxitoxin. Fluorescence enhancement data are consistent with a 1:1 binding complex for all crowns. The binding constants are in the range of 10(4) M(-)(1) in ammonium phosphate buffer (pH 7.1) in 80% ethanol solvent. Selectivity for sensing saxitoxin versus several organic analytes has been demonstrated for the first time. Possible modes of binding are presented, and relevance to saxitoxin monitoring programs are discussed.     

Microfabrication of three-dimensional bioelectronic architectures

The functionality and structural diversity of biological macromolecules has motivated efforts to exploit proteins and DNA as templates for synthesis of electronic architectures. Although such materials offer promise for numerous applications in the fabrication of cellular interfaces, biosensors, and nanoelectronics, identification of techniques for positioning and ordering bioelectronic components into useful patterns capable of sophisticated function has presented a major challenge. Here, we describe the fabrication of electronic materials using biomolecular scaffolds that can be constructed with precisely defined topographies. In this approach, a tightly focused pulsed laser beam capable of promoting protein photo-cross-linking in specified femtoliter volume elements is scanned within a protein solution, creating biomolecular matrices that either remain in integral contact with a support surface or extend as free-standing structures through solution, tethered at their ends. Once fabricated, specific protein scaffolds can be selectively metallized via targeted deposition and growth of metal nanoparticles, yielding high-conductivity bioelectronic materials. This aqueous fabrication strategy opens new opportunities for creating electronic materials in chemically sensitive environments and may offer a general approach for creating microscopically defined inorganic landscapes.     

Cellular logic with orthogonal ribosomes

The creation and use of unnatural molecules to control cellular function is a long standing goal of the chemical community, but in general, these efforts have been directed at finding molecules to inhibit or activate a particular molecular target or function, or to elicit a particular phenotype. Here we show that multiple unnatural molecules (orthogonal ribosomes) can be used combinatorially, in a single cell, to program Boolean logic functions. These experiments show how attention to the molecular specificity of noncovalent interactions between unnatural macromolecules allows the synthesis of complex function from the "bottom-up" in living matter.