Whole-cell Gluconobacter oxydans biosensor for 2-phenylethanol biooxidation monitoring

A microbial biosensor for 2-phenylethanol (2-PE) based on the bacteria Gluconobacter oxydans was developed and applied in monitoring of a biotechnological process. The cells of G. oxydans were immobilized within a disposable polyelectrolyte complex gel membrane consisting of sodium alginate, cellulose sulphate and poly(methylene-co-guanidine) attached onto a miniaturized Clark oxygen electrode, forming whole cell amperometric biosensor. Measured changes in oxygen concentration were proportional to changes in 2-PE concentration. The biosensor sensitivity was 864 nA mM⁻¹ (RSD = 6%), a detection limit of 1 μM, and the biosensor response towards 2-PE was linear in the range 0.02–0.70 mM. The biosensor preserved 93% of its initial sensitivity after 7 h of continuous operation and exhibited excellent storage stability with loss of only 6% of initial sensitivity within two months, when stored at 4 °C. The developed system was designed and successfully used for an off-line monitoring of whole course of 2-PE biooxidation process producing phenylacetic acid (PA) as industrially valuable aromatic compound. The biosensor measurement did not require the use of hazardous organic solvent. The biosensor response to 2-PE was not affected by interferences from PA and phenylacetaldehyde at concentrations present in real samples during the biotransformation and the results were in a very good agreement with those obtained via gas chromatography.     

Interfacing of microbial cells with nanoparticles: Simple and cost-effective preparation of a highly sensitive microbial ethanol biosensor

Various types of carbon nanoparticles were directly mixed with microbial cells of Gluconobacter oxydans within a 3-D bionanocomposite in order to prepare a highly sensitive ethanol biosensor with a short response time. From all carbonaceous nanomaterials tested, single- or multi-walled carbon nanotubes provided the highest sensitivity of detection (117–121 µA cm^?2 mM^?1), but from a practical point of view, Ketjen black 300 and 600 provide very low detection limit (2–6 µM) and high sensitivity for the ethanol analysis (84–88 µA cm^?2 mM^?1)with a shortresponse time (14–33 s). Moreover, the price of Ketjen black is a few orders of magnitude lower compared to that of carbon nanotubes. Finally, the study showed that the morphology of nanoparticles rather than their surface modification is the key element in achieving high sensitivity of ethanol detection.     

<Emphasis Type="Italic">Gluconobacter</Emphasis> sp. cells for manufacturing of effective electrochemical biosensors and biofuel cells

Gluconobacter oxydans bacteria exhibit a unique metabolism for quick and incomplete oxidation of a wide range of different compounds (aldoses, ketoses, mono- and poly-alcohols, etc.). Such biotransformation efficiency with simple biomass production led to the industrial applications of these bacteria in the production of several important commodities. Their respiratory activity can also be successfully studied and used in the field of bioelectrochemistry. The main aim of this review is to present various strategies to improve selectivity of assays using intact/treated cells of G. oxydans, to introduce the application of G. oxydans-based biosensors in selective monitoring of analytes during biotransformation processes and to provide information about utilizable sugars in fermentation media or in biological oxygen demand value determination. The final part of the review describes potential application of G. oxydans cells in the generation of electricity from complex fuels within microbial fuel cells by advanced direct electron transfer route between bacterial cells and electrodes.     

Comparison of hydration reactions for "piano-stool" RAPTA-B and [Ru(η6-arene)(en)Cl]+ complexes: density functional theory computational study

The hydration process for two Ru(II) representative half-sandwich complexes: Ru(arene)(pta)Cl(2) (from the RAPTA family) and [Ru(arene)(en)Cl](+) (further labeled as Ru_en) were compared with analogous reaction of cisplatin. In the study, quantum chemical methods were employed. All the complexes were optimized at the B3LYP/6-31G(d) level using Conductor Polarizable Continuum Model (CPCM) solvent continuum model and single-point (SP) energy calculations and determination of electronic properties were performed at the B3LYP∕6-311++G(2df,2pd)/CPCM level. It was found that the hydration model works fairly well for the replacement of the first chloride by water where an acceptable agreement for both Gibbs free energies and rate constants was obtained. However, in the second hydration step worse agreement of the experimental and calculated values was achieved. In agreement with experimental values, the rate constants for the first step can be ordered as RAPTA-B > Ru_en > cisplatin. The rate constants correlate well with binding energies (BEs) of the Pt∕Ru-Cl bond in the reactant complexes. Substitution reactions on Ru_en and cisplatin complexes proceed only via pseudoassociative (associative interchange) mechanism. On the other hand in the case of RAPTA there is also possible a competitive dissociation mechanism with metastable pentacoordinated intermediate. The first hydration step is slightly endothermic for all three complexes by 3-5 kcal∕mol. Estimated BEs confirm that the benzene ligand is relatively weakly bonded assuming the fact that it occupies three coordination positions of the Ru(II) cation.     

Shape Optimization for Navier–Stokes Equations with Algebraic Turbulence Model: Numerical Analysis and Computation

We study the shape optimization problem for the paper machine headbox which distributes a mixture of water and wood fibers in the paper making process. The aim is to find a shape which a priori ensures the given velocity profile on the outlet part. The mathematical formulation leads to the optimal control problem in which the control variable is the shape of the domain representing the header, the state problem is represented by the generalized Navier-Stokes system with nontrivial boundary conditions. This paper deals with numerical aspects of the problem.     

The higher-order Picone identity and comparison of half-linear differential equations of even order

An identity of the Picone type for higher-order half-linear ordinary differential operators of the form and where p_j and P_j, j=0,…,n, are continuous functions defined on [a,b] and , is derived and then the Sturmian comparison theory for the corresponding 2nth-order equations l_α[x]=0 and L_α[y]=0 based on this identity is developed.     

On an integral inequality of the Wirtinger type

In this paper, a new Picone-type identity for the quasilinear differential operator of the second order is used to establish an integral inequality involving functions and their derivatives which generalizes the classical Wirtinger inequality.