Layer-engineering of high-Tc superconductors: (Cu,Mo)Sr2(Ce,Y)4Cu2O13+delta with a quadruple-fluorite-layer block between CuO2 planes

Among high-Tc superconductive copper oxides, there have been known phases that contain fluorite-structured layers as an additional "blocking block" between adjacent CuO2 planes. Here, we report that even a phase with the CuO2 planes separated by a 12-A thick quadruple-fluorite-layer block can be synthesized in a single phase and strongly oxygenated form to exhibit superconductivity with a Tc value as high as 55 K. The new phase is the fourth member of the (Cu,Mo)Sr2(Ce,Y)sCu2O(5+2s+delta) or (Cu,Mo)-12s2 homologous series. Comparison with the previously known s = 1, 2, and 3 members of the series reveals the amazing conclusion that Tc remains essentially unaffected upon inserting additional fluorite-structured layers between the two CuO2 planes as long as the hole-doping level of the planes is kept constant.     

Gas-phase oxidation and reduction of some 1-(2-benzothiazolyl)-3,5-diphenyl formazans. Complex formation with transition metals under laser desorption ionization

Five differently substituted 1-(2-benzothiazolyl)-3,5-diphenyl formazans were studied by laser desorption ionization (LDI) and matrix assisted laser desorption/ionization (MALDI) mass spectrometry. The best explanation of the results is that the formazan molecules are photoionized to molecular radical ions, which then further react by ion-molecule reactions. Supporting this proposal was the abundant formation of [M − H]⁺ ions under LDI. These ions are not observed at all under either electron or chemical ionization. Under MALDI, the extent of the oxidation process is clearly dependent on the ability of the matrix to act as a reducing agent. With transition metals the formazans formed singly charged 1:2 metal:formazan complexes. The most stable electronic configuration of the complex determined the oxidation state of the metal regardless of its initial oxidation state. In some cases, this process also demanded a gas-phase reduction of the formazan. The ionization efficiency and affinity for complex formation depended on the substituent at the 3-phenyl group; both were increased by an electron donating substituent. The formazans were also tested as potential matrices for MALDI. Reasonable results were observed for several groups of compounds; however, only the piperazine ligands produced higher quality spectra with formazans than with common commercial matrices.     

Characterisation of proanthocyanidin aglycones and glycosides from rose hips by high-performance liquid chromatography-mass spectrometry, and their rapid quantification together with vitamin C

Fifteen individual proanthocyanidin aglycones and 19 glycosides, together with a complex mixture of chromatographically non-separated tetra- to octameric proanthocyanidin glycosides were detected--the non-separated glycosides being novel natural products--and characterised from dog rose hips using high-performance liquid chromatography-electrospray ionisation mass spectrometry (HPLC-ESI-MS). Along with these phenolics, a 50% aqueous ethanol extract of rose hips was found to contain high levels of Vitamin C. A simple and rapid HPLC method assisted by diode array detection for the estimation of the total concentration of proanthocyanidin aglycones and glycosides, as well as Vitamin C, in rose hip extracts was developed.     

Electronic structure of the enolate anion of chlorophyll b

The enolate anion of chlorophyll b (Chl b) has been synthesized under deoxygenated conditions and its electronic structure characterized for the first time by ¹H NMR and electronic absorption spectroscopy. The formation of the enolate anion caused a marked perturbation to the 18 π-electron [18]diazaannulene aromatic pathway of Chl b. This perturbation appeared as noticeable upfield shifts, exceeding 1 ppm, for the meso-CH protons of the Chl b enolate anion. Nevertheless, the enolate anion remained diatropic, maintaining aromaticity in its delocalized macrocycle.     

Influence of pH on formation and stability of phosphatidylcholine/phosphatidylserine coatings in fused-silica capillaries

The effect of pH on the formation and stability of phospholipid coatings in fused-silica capillaries in electrophoresis was investigated. A liposome solution consisting of 3 mM of 80:20 mol% phosphatidylcholine/phosphatidylserine (PC/PS) in N-(2-hydroxyethyl)piperazine-N'-(2-ethanesulfonic acid) (HEPES) buffer was used as coating material. The coating was prepared by a method described earlier and five steroids were used as neutral model analytes. First, the effect of pH of the coating solution on the formation and stability of phospholipid coatings was studied at pH 6.5-8.5. The pH of the background electrolyte (BGE) solution (HEPES) was either kept constant at pH 7.4 or made similar to the pH of the liposome coating solution. Results showed that attachment of the coating on the fused-silica wall mostly depends on the protonation of amines of the phospholipids and HEPES. The ability of the phospholipid coating to withstand changes in pH was then investigated by coating at pH 7.5 and separating steroids with acetic acid, 3-(cyclohexylamino)-1-propanesulfonic acid (CAPS), HEPES, or glycine BGE, adjusted to pH between 4.5 and 10.8. The results showed that with use of BGE solution at pH 10.8, the separation of steroids was not successful and the electroosmotic flow was high because of leakage of the phospholipid coating during preconditioning of the capillary with BGE solution. There was no phospholipid leakage with a BGE solution of pH 4.5, indicating that the protonated form of the functional groups of PS and HEPES participating in the attachment of the phospholipid coating to the capillary play an essential role in the success of the coating.     

Hole doping and superconductivity characteristics of the s=1, 2 and 3 members of the (Cu,Mo)-12s2 homologous series of layered copper oxides

Superconductivity characteristics have been systematically evaluated for a two-CuO₂-plane copper oxide system, (Cu,Mo)-12s2, upon increasing the number of fluorite-structured layers, s, between the two CuO₂ planes. Essentially single-phase samples of (Cu_0.75Mo_0.25)Sr₂YCu₂O_7+δ (s=1), (Cu_0.75Mo_0.25)Sr₂(Ce_0.45Y_0.55)₂Cu₂O_9+δ (s=2) and (Cu_0.75Mo_0.25)Sr₂(Ce_0.67Y_0.33)₃Cu₂O_11+δ (s=3) were synthesized through a conventional solid-state route in air. To make the samples superconductive an additional high-pressure oxygenation (HPO) treatment was required. Such treatment (carried out at 5 GPa and 500 °C in the presence of 75 mol% Ag₂O₂ as an oxygen source to maximize the T_c) compressed the crystal lattice for the three members of the (Cu_0.75Mo_0.25)-12s2 series equally, i.e., by 0.01 Å for the a parameter and by 0.07 Å for the c parameter per formula unit. From both Cu L-edge and O K-edge XANES spectra the s=1 sample was found to possess the highest overall hole-doping level among the HPO samples. Accordingly it exhibited the best superconductivity characteristics. With increasing s, both the T_c (s=1: 88 K, s=2: 61 K, s=3: 53 K) and H_irr values got depressed, being well explained by the trend of decreasing CuO₂-plane hole concentration with increasing s as revealed from O K-edge XANES spectra for the same samples. Hence, the present results do not suggest any significant (negative) impact on the superconductivity characteristics from the gradually thickened fluorite-structured block itself.     

The effect of side-chain length of cellulose fatty acid esters on their thermal,barrier and mechanical properties

Currently, long-chain cellulose esters are not produced commercially because of high price, and since their preparation typically requires a large quantity of chemicals. To reduce the chemical consumption, cellulose reactivity needs to be increased without losing its quality. One way to increase the reactivity of cellulose is to decrease its molar mass in a controlled manner. In this study, we have synthesized cellulose esters with different side-chain length (C6–C18) in a homogeneous system using ozone molar mass-controlled cellulose. The target was to keep the degree of substitution as low as possible while still ensuring the suitability of cellulose esters for solvent casting. Thermal, barrier and mechanical properties were studied depending on cellulose fatty acid ester side-chain length. All our molar mass-controlled cellulose esters form optically transparent, flexible and heat-sealable films with good water barrier properties and are processable without the addition of an external plasticizer. Furthermore, the films have mechanical properties comparable to some generally used plastics. These good properties suggest that our molar mass-controlled cellulose esters could be potential candidates for various applications such as films and composites.     

Rational Development of Guanidinate and Amidinate Based Cerium and Ytterbium Complexes as Atomic Layer Deposition Precursors: Synthesis,Modeling, and Application

Owing to the limited availability of suitable precursors for vapor phase deposition of rare-earth containing thin-film materials, new or improved precursors are sought after. In this study, we explored new precursors for atomic layer deposition (ALD) of cerium (Ce) and ytterbium (Yb) containing thin films. A series of homoleptic tris-guanidinate and tris-amidinate complexes of cerium (Ce) and ytterbium (Yb) were synthesized and thoroughly characterized. The C-substituents on the N-C-N backbone (Me, NMe₂, NEt₂, where Me=methyl, Et=ethyl) and the N-substituents from symmetrical iso-propyl (iPr) to asymmetrical tertiary-butyl (tBu) and Et were systematically varied to study the influence of the substituents on the physicochemical properties of the resulting compounds. Single crystal structures of [Ce(dpdmg)₃] 1 and [Yb(dpdmg)₃] 6 (dpdmg=N,N'-diisopropyl-2-dimethylamido-guanidinate) highlight a monomeric nature in the solid-state with a distorted trigonal prismatic geometry. The thermogravimetric analysis shows that the complexes are volatile and emphasize that increasing asymmetry in the complexes lowers their melting points while reducing their thermal stability. Density functional theory (DFT) was used to study the reactivity of amidinates and guanidinates of Ce and Yb complexes towards oxygen (O₂) and water (H₂O). Signified by the DFT calculations, the guanidinates show an increased reactivity toward water compared to the amidinate complexes. Furthermore, the Ce complexes are more reactive compared to the Yb complexes, indicating even a reactivity towards oxygen potentially exploitable for ALD purposes. As a representative precursor, the highly reactive [Ce(dpdmg)₃] 1 was used for proof-of-principle ALD depositions of CeO₂ thin films using water as co-reactant. The self-limited ALD growth process could be confirmed at 160 °C with polycrystalline cubic CeO₂ films formed on Si(100) substrates. This study confirms that moving towards nitrogen-coordinated rare-earth complexes bearing the guanidinate and amidinate ligands can indeed be very appealing in terms of new precursors for ALD of rare earth based materials.     

Effects of various washing procedures on the chromium content of human scalp hair

The effects of four wash procedures on the concentration of chromium in a pooled sample of human scalp hair are compared. The wash solutions examined are Triton X-100, sodium lauryl sulphate, acetone, and a mixture (1 + 1) of hexane and ethanol. The plateaux reached for hair chromium concentration are functions of the number of washings, and are characteristic for each wash solution. The wash procedure recommended involves two 20-min washes with aqueous 1% sodium lauryl sulphate solution after a hexane rinse.     

Korn inequality for a thin rod with rounded ends

We consider an elastic rod with rounded ends and diameter proportional to a small parameter h > 0. The roundness of the ends is described by an exponent m ∈ (0,1). We derive for the rod an asymptotically sharp Korn inequality with a special weighted anisotropic norm. Weight factors with m‐dependent powers of h appear both in the anisotropic norm and the Korn inequality itself, and we discover three critical values m = 1 ∕ 4, m = 1 ∕ 2 and m = 3 ∕ 4 at which these exponents are crucially changed. Copyright © 2014 John Wiley & Sons, Ltd.