Hydrothermal processing of waste pine wood into industrially useful products

An ongoing major outbreak of mountain pine beetle in Western Canada has provided a clear opportunity to utilize waste pinewood as a source of renewable energy. Therefore hydrothermal processing of waste pinewood as a feedstock for bio-oil and biochar production using subcritical and supercritical water technology was carried out in semi-batch mode to investigate the effect of pressure (200–400 bar) and temperature (300–400 °C) on the yield and composition of bio-oil. The pinewood samples have very high cellulose and hemicellulose content but low ash content and are thus a formidable feedstock for bioenergy production. The optimum conditions for the hydrothermal processing of the pinewood in a tubular reactor were found to be 400 °C and 250 bars with respect to biochar and bio-oil yield based on the highest calorific value analysis. Detailed characterization of bio-oil and biochar was performed using GCMS, NMR, SEM, calorific value, and elemental analysis, respectively. The critical components of bio-oil were found to be phenols, methoxyphenols, hydroxymethyl furfural (HMF), and vanillin, whereas as compared to the raw pine wood, the biochar was considerably lower H:C and O:C ratios than those of the unprocessed pinewood. The analyses of bio-oil by means of GCMS and ¹H NMR showed that it was mainly composed of heterocyclic compounds, phenols, aldehydes and acids.     

Synthesis,crystal structure,magnetism, and absorption spectra of A2UX5 Type Halides (A = K,Rb; X = Cl,Br, I)

The ternary uranium(III) halides A₂UX₅ (A = K, Rb; X = Cl, Br, I) have been prepared from the binary components AX and UX₃ in sealed tantalum containers. According to their Guinier X-ray powder patterns, they all crystallize with the K₂PrCl₅/Y₂HfS₅ type of structure. Lattice constants for ambient temperature are reported. Single-crystal structure refinemens were undertaken for K₂UI₅ and Rb₂UCl₅. Magnetic susceptibility data were recorded with a SQUID magnetometer from liquid helium to room temperature. One-dimensional (intrachain) and three-dimensional antiferromagnetic ordering occur at low temperatures dependent upon the U³⁺? U³⁺ distance. Absorption spectra were recorded between 4 000 and 28 000 cm^?1. They show f—f transitions typical for U³⁺ and, depending on the halide, very strong f—d transitions above 14 000 to 15 000 cm^?1, respectively.     

Continuous monitoring of thermooxidative degradation products of polystyrene by membrane extraction with sorbent interface and gas chromatography

A novel method for the continuous monitoring of thermooxidative degradation products of polystyrene by membrane extraction with sorbent interface (MESI) and gas chromatography (GC) is developed. The results are compared with solid-phase microextraction-GC, which can extract gases, vapors, and aerosols. The volatile and semivolatile degradation products are identified by mass spectrometry. The membrane used in the MESI-GC analysis shows a high permeation for volatile aromatic hydrocarbons; a low permeation for corresponding volatile aldehydes; and no permeation for less volatile alcohols, acids, and degradation products with a high molecular weight, thus reducing significantly the number of compounds detected from MESI-GC. Sensitivity of the method depends on the time of trapping, which is limited by the breakthrough of the trap. By heating the trap at fixed intervals of time, consecutive gas chromatograms are obtained.     

On the generalized Fréchet functional equation with constant coefficients and its stability

We study a generalization of the Fréchet functional equation, stemming from a characterization of inner product spaces. We show, in particular, that under some weak additional assumptions each solution of such an equation is additive. We also obtain a theorem on the Ulam type stability of the equation. In its proof we use a fixed point result to show the existence of an exact solution of the equation that is close to a given approximate solution.     

Study of interaction of proteins with fumed silica in aqueous suspensions by adsorption and photon correlation spectroscopy methods

The interaction of fumed silica A-300 (S(BET) = 297 m2 g(-1)) with bovine serum albumin (prepared by different methods), ovalbumin, human hemoglobin, and gelatin as a function of pH, salinity, and concentrations of components in aqueous medium was studied by adsorption and photon correlation spectroscopy (PCS) methods. Comparison of equilibrium (incubation time t(i) approximately 1 h) adsorption of proteins on A-300, minute (t(i) approximately 1 min) flocculation rate, and the particle size distributions measured by the PCS method shows different rearrangement of particle swarms depending on pH, salinity, and concentration of proteins, especially at pH close to IEP of silica or proteins. The electrokinetic mobility of protein/silica swarms is greater than that of individual components at pH far from the IEP of proteins. Changes in the Gibbs free energy (DeltaG) on protein adsorption depend on pH (-DeltaG is minimal at pH 2, close to the IEP of silica, and maximal at pH between the IEP of protein and silica), concentration (-DeltaG is maximal at C(p) between 1 and 6 mg/ml), type of proteins, and their preparation technique.     

The Synthesis And Chemical Properties Of N-D-Pentopyranosylamines,Derivatives Of Tryptamine And Tyramine.

Abstract

The synthesis and structure of N-D-pentopyranosylamines derived from the amines tiyptamine tyramine and the pentoses D-xylose, D-arabinose and D-lyxose are presented. NMR spectroscopy and mass spectrometry were used to verify the proposed α,β-D-pentopyranosylamine structures.     

Meromorphic univalent functions in an annulus

We consider the integral means for the class of functions which are meromorphic and univalent in an annulus.     

Electrical properties of TiO<Subscript>2</Subscript>: equilibrium vs dynamic electrical conductivity

The present work reports semiconducting properties of high purity TiO₂ determined in the gas/solid equilibrium, as well as during controlled heating and cooling in the range 300–1,273 K. The activation energy of the electrical conductivity is considered in terms of the activation enthalpy of the formation of ionic defects and the activation enthalpy of the mobility of electronic defects. These data, determined from the dynamic electrical conductivity experiments, are compared to the electrical conductivity data determined in equilibrium. It is shown that only the equilibrium electrical conductivity data for high-purity TiO₂ are well defined. It is shown that the activation energy of the electrical conductivity determined in equilibrium differs substantially from that for the dynamic electrical conductivity data during cooling and heating. It is concluded that the formation enthalpy term determined from the dynamic conductivity data is determined by the heating/cooling rate rather than materials’ properties.