Calorimeter energy calibration using the energy conservation law

A new calorimeter energy calibration method was developed for the proposed ILC detectors. The method uses the center-of-mass energy of the accelerator as the reference. It has been shown that using the energy conservation law it is possible to make ECAL and HCAL cross calibration to reach a good energy resolution for the simple calorimeter energy sum.      

The real solution to scalar field equation in 5D black string space

After the nontrivial quantum parameters Ω _n and quantum potentials V _n obtained in our previous research, the circumstance of a real scalar wave in the bulk is studied with the similar method of Brevik and Simonsen (Gen. Rel. Grav. 33:1839, 2001). The equation of a massless scalar field is solved numerically under the boundary conditions near the inner horizon r _e and the outer horizon r _c . Unlike the usual wave function Ψ_ωl in 4D, quantum number n introduces a new functions Ψ_{ωl n} , whose potentials are higher and wider with bigger n. Using the tangent approximation, a full boundary value problem about the Schrödinger-like equation is solved. With a convenient replacement of the 5D continuous potential by square barrier, the reflection and transmission coefficients are obtained. If extra dimension does exist and is visible at the neighborhood of black holes, the unique wave function Ψ_{ωl n} may say something to it.     

Vibrational dynamics of the organometallic compound triarylorganoantimony (V) SbPh<Subscript>3</Subscript>[O<Subscript>2</Subscript>CC(OH)Ph<Subscript>2</Subscript>]<Subscript>2</Subscript>

A complete normal coordinate analysis was performed for five-coordinate non-rigid triarylantimony diester SbPh₃(O₂CR)₂, known to be a bioactive molecule, using Wilson G-F matrix method and Urey Bradley force field. The study of vibrational dynamics was performed using the concept of group frequencies and band intensities.      

Solvent and pH Effects on the Fluorescence of 7-(Dimethylamino)-2-Fluorenesulfonate

A novel water-soluble solvatochromic molecule, 7-(dimethylamino)-2-fluorenesulfonate (2,7-DAFS), was prepared by a three-step reaction from 2-nitrofluorene in good overall yield. The pH and solvent effects on the UV-VIS absorption and fluorescence spectra of 2,7-DAFS have been studied. Protonation of the dimethylamino group switches the absorption from intramolecular charge-transfer (ICT) to π → π* transition. The ground state pKa value of 2,7-DAFS was determined as 4.51. The fluorescence spectrum of the excited basic form, *(DAFS), shows a structureless single band with a large Stokes shift, whereas that of the acidic form, *(⁺HDAFS), exhibits a structured band with a small Stokes shift. The emission intensities of the basic and acidic forms versus pH/Ho plots show stretched sigmoidal curves and indicate that (1) the rate of deprotonation of *(⁺HDAFS) is comparable to the fluorescence decay of the species, and (2) the efficient proton-induced quenching of *(DAFS) fluorescence occurs. The pKa* was estimated as −1.7 from the fluorescence titration curve. The fluorescence maximum of *(DAFS) is blue-shifted as the polarity of solvent decreases. However, no clear dependency of the emission intensity and spectral half width, and thus fluorescence quantum yield, on the solvent polarity was revealed. It appears that the fluorescence sensitivity of 2,7-DAFS is 15 ∼ 25 times greater than the sensitivity of a widely utilized fluorescent probe, 5-(dimethylamino)-1-naphthalenesulfonate. This higher sensitivity, together with the ease of derivatization, would provide the fluorene-based fluorescent molecules significant advantages for a variety of applications.     

Langmuir-Blodgett self-assembly and electrochemical catalytic property of FePt magnetic nano-monolayer

Dispersed-well FePt nanoparticles with particle size ~5 nm have been prepared by hydrazine hydrate reduction of H₂PtCl₆·6H₂O and FeCl₂·4H₂O in ethanol–water system. By employing as-synthesized FePt nanoparticles, the monolayer can be formed by LB Technique. The structural, magnetic properties and electrochemical properties of FePt monolayer were respectively studied by XRD, TEM, VSM and CHI 820 electrochemical workstation. The as-synthesized particle has a chemically disordered fcc structure and can be transformed into chemically ordered fct structure after annealing treatment above 400°C. The coercivity of ordered fct FePt phase can be up to 2515Oe. CVs of 0.5 M H₂SO₄/0.5M CH₃OH on GCE modified with FePt nanoparticles monolayer films illustrate that the as-synthesized FePt is a kind of active electrochemical catalyst.     

Dispersion of nano-silicon carbide (SiC) powder in aqueous suspensions

The dispersion characteristics of nanosize silicon carbide (SiC) suspension were investigated in terms of surface charge, particle size, rheological measurement and adsorption study. Ammonium polycarboxylate has been used as dispersant to stabilize the suspension. It was found that the isoelectric point (iep) of SiC powder was pH_iep (4.9). The surface charge of powder changed significantly in presence of the ammonium polycarboxylate dispersant and iep shifted significantly towards lower acidic pH (3.6). The shift in iep has been quantified in terms of ΔG ⁰ _SP, the specific free energy of adsorption between the surface sites and the adsorbing polyelectrolyte (APC). The values of ΔG ⁰ _SP (−10.85 RT unit) estimated by the electro kinetic data compare well with those obtained from adsorption isotherms (−9.521 RT unit). The experimentally determined optimum concentration of dispersant required for maximizing the dispersion was found to be 2.4 mg/g of SiC (corresponding to an adsorbed amount of 1.10 mg/g), at pH 7.5. This is much below the full monolayer coverage (corresponding to adsorbed amount of 1.75 mg/g) of the particles surface by the dispersant. The surface charge quantity, rheological, pH, electro kinetic and adsorption isotherm results were used to explain and correlate the stability of the nanosize silicon carbide in aqueous media. At pH 7.5, where both SiC surface and APC are negatively charged, the adsorption of APC was low because of limited availability of favourable adsorption sites. In addition, the brush-like configuration of the adsorbed polymer prevented close approach of any additional dispersant; hence stabilization of the slurry happens at a comparatively lower concentration than the monolayer coverage.     

Initial-state parton shower kinematics for NLO event generators

We are developing a consistent method to combine tree-level event generators for hadron collision interactions with those including one additional QCD radiation from the initial-state partons, based on the limited leading-log (LLL) subtraction method, aiming at an application to NLO event generators. In this method, a boundary between non-radiative and radiative processes necessarily appears at the factorization scale (μ_F). The radiation effects are simulated using a parton shower (PS) in non-radiative processes. It is therefore crucial in our method to apply a PS which well reproduces the radiation activities evaluated from the matrix-element (ME) calculations for radiative processes. The PS activity depends on the applied kinematics model. In this paper we introduce two models for our simple initial-state leading-log PS: a model similar to the ’old’ PYTHIA-PS and a p_T-prefixed model motivated by ME calculations. PS simulations employing these models are tested using W-boson production at LHC as an example. Both simulations show a smooth matching to the LLL subtracted W+1 jet simulation in the p_T distribution of W bosons, and the summed p_T spectra are stable against a variation of μ_F, despite that the p_T-prefixed PS results in an apparently harder p_T spectrum.     

Diffusion and transport phenomena in a collisional magnetoplasma having both streaming and temperature anisotropy: Collisional kinetics

Boltzmann-transport equation is analytically solved for two-component magnetoplasma using Chapman-Enskog analysis to include collisional diffusion transport having anisotropies in both streaming velocity and temperature components. The modified collisional integrals are analytically solved with flux integrals and perturbed kinetic equation to arrive at drift diffusion velocity and resulting transport coefficients which are markedly affected by both streaming and temperature anisotropy. The early isotropic results are recovered in the limit V ₀ = 0 and T _‖ = T _⊥ which reduce to eqs (11.30) and (11.31) of [1] and eqs (2.7) and (2.13) of [2]. The electrical resistivity (η_⊥) diminishes sharply in fusion temperature limit kT _⊥ = 1 keV. The shape of the curves for both electrical resistivity and thermal conductivity is rectangular hyperbolic. However, for low thermal ratio (T _‖/T _⊥ < 1), the curves are raised up and for high thermal ratio (T _‖/T _⊥ > 1), they are lowered down the isotropic case (T _‖/T _⊥ > 1), showing comparatively diminished magnitudes of the quantities.      

Sulphur isotope compositions of components of coal and S-isotope fractionation during its combustion and flue gas desulphurization

Sulphur isotope compositions were determined in two different Polish coals (hard coal and lignite) and by-products originating from their combustion. The desulphurization process was also investigated. It was demonstrated that desulphurization changes the isotopic composition of sulphur emitted in the form of SO(2) to the atmosphere even if the process is conducted in a different way (wet lime technology and electron beam method). This fact has to be considered in the studies regarding anthropogenic sulphur genesis and its fate in the environment.