The rotating particles probe: A new technique to measure interactions between particles and a substrate

We demonstrate a new probing technique to measure physicochemical interactions between particles and a substrate in a fluid. The technique is based on the measurement of field-induced rotation of individual magnetic particles in contact with the substrate. The parallel measurement of many particles with single-particle resolution gives reliable statistics in a short time. Using this technique, the interaction between streptavidin-coated magnetic particles and a glass substrate is measured for various buffer conditions. Increased binding is quantified for increasing ionic strength and decreasing pH. The results are found to be in agreement with calculations of electrostatic interactions. We also apply the technique to study how binding is reduced by blocking the substrate with albumin.     

Hot-film anemometry for measuring lateral line stimuli

A hot-film anemometer system has been calibrated and evaluated for the measurement of sinusoidal water motions used in stimulating the mechanosensory lateral line system of a teleost fish. The response of the anemometer system to water motions created by a vibrating sphere was measured over a wide range of frequencies, intensities, and distances from the sphere. The amplitude response of the system to signals along the axis of sphere vibration was found to be linear over a 50-dB range for frequencies from 10-200 Hz, with the lowest end of the dynamic range (between 10(-8) and 10(-9) m) corresponding to physiological measures of best sensitivity in the lateral line system of the mottled sculpin, Cottus bairdi. The measured attenuation of the signal with distance was also linear over this frequency range out to distances of six times the radius ( = 3 mm) of the sphere and followed the predicted falloff rate for a dipolar source. The linear response of the anemometer system over a wide dynamic range encompassing the detection range of the lateral line system, and the match between predicted and measured motions at varying distances from a dipolar source, indicates that hot-film anemometry is a useful technique for measuring low-level, low-frequency signals likely to stimulate the lateral line system and other hydrodynamic detectors.     

Identification and quantification of polycarboxylates in detergent products using off-line size exclusion chromatography-nuclear magnetic resonance

The performance of many contemporary detergent products critically depends on polymers. Water-soluble polycarboxylates represent an important class of detergent polymers, and their quantitative assessment in detergent matrices stands as a considerable challenge. The presence of high levels of surfactants is a major complication, due to the strong tendency of surfactants to form micelles and to interact with the polymers. First, we addressed critical steps in the subsequent combined use of liquid extraction and off-line size exclusion chromatography-nuclear magnetic resonance (SEC-NMR) for identification and quantification of polycarboxylates in detergent products. Next, the different steps in the off-line SEC-NMR procedure were optimized with respect to precision and accuracy. This resulted in recoveries of more than 80% for maleic acid/acrylic acid copolymers; in detergent products a proportional bias of 30% is achieved. The method showed good precision with a relative standard deviation of within-laboratory reproducibility between 5% and 14%.     

Ultrafine grain formation and coating mechanism arising from a blast coating process: A transmission electron microscopy analysis

This article examines the substrate/coating interface of a coating deposited onto mild steel and stainless steel substrates using an ambient temperature blast coating technique known as CoBlast. The process uses a coincident stream of an abrasive blast medium and coating medium particles to modify the substrate surface. The hypothesis for the high bond strength is that the abrasive medium roughens the surface while simultaneously disrupting the passivating oxide layer of the substrate, thereby exposing the reactive metal that then reacts with the coating medium. The aim of this study is to provide greater insight into the coating/substrate bonding mechanism by analysing the interface between a hydroxyapatite coating on both mild and stainless steel substrates. The coating adhesion was measured via a tensile test, and bond strengths of approximately 45 MPa were measured. The substrate/coating interface was examined using transmission electron microscopy and selected area diffraction. The analysis of the substrate/coating interface revealed the presence of ultrafine grains in both the coating and substrate at interface associated with deformation at the interface caused by particle impaction during deposition. The chemical reactivity resulting from the creation of these ultrafine grains is proposed to explain the high adhesive strength of CoBlast coatings.     

Evaluation of comprehensive on-line liquid chromatography thermally assisted hydrolysis and methylation-gas chromatography-mass spectrometry for characterization of sulfonated lignins

Sulfonated lignins, used as dispersants in agrochemical formulations, have been characterized by hyphenation of ion-pair RPLC and thermally assisted hydrolysis and methylation-GC-MC (THM-GC-MS). The chemical structure of a series of selected lignins was evaluated, both in terms of overall composition and in terms of composition as a function of molecular size. Some sulfonated lignins give rise to unstable formulations. In the compositional analysis, these samples were found to yield additional fragments. A newly developed comprehensive method made it possible to monitor the occurrence of these fragments as a function of molecular size. In addition to differences in the molecular size between "good" and "bad" batches, clear differences in chemical composition were established.     

Probability of failure of the watershed algorithm for peak detection in comprehensive two-dimensional chromatography

The watershed algorithm is the most common method used for peak detection and integration in two-dimensional chromatography. However, the retention time variability in the second dimension may render the algorithm to fail. A study calculating the probabilities of failure of the watershed algorithm was performed. The main objective was to calculate the maximum second-dimension retention time variability, Δ²t_R,crit, above which the algorithm fails. Several models to calculate Δ²t_R,crit were developed and evaluated: (a) exact model; (b) simplified model and (c) simple-modified model. Model (c) gave the best performance and allowed to deduce an analytical expression for the probability of failure of the watershed algorithm as a function of experimental Δ²t_R, modulation time and peak width in the first and second dimensions. It could be demonstrated that the probability of failure of the watershed algorithm under normal conditions in GC × GC is around 15–20%. Small changes of Δ²t_R, modulation time and/or peak width in the first and second dimension could induce subtle changes in the probability of failure of the watershed algorithm. Theoretical equations were verified with experimental results from a diesel sample injected in GC × GC and were found to be in good agreement with the experiments.     

Trends in aircraft noise annoyance: the role of study and sample characteristics

Recently, it has been suggested that the annoyance of residents at a given aircraft noise exposure level increases over the years. The objective of the present study was to verify the hypothesized trend and to identify its possible causes. To this end, the large database used to establish earlier exposure-response relationships on aircraft noise was updated with original data from several recent surveys, yielding a database with data from 34 separate airports. Multilevel grouped regression was used to determine the annoyance response per airport, after which meta-regression was used to investigate whether study characteristics could explain the heterogeneity in annoyance response between airports. A significant increase over the years was observed in annoyance at a given level of aircraft noise exposure. Furthermore, the type of annoyance scale, the type of contact, and the response percentage were found to be sources of heterogeneity. Of these, only the scale factor could statistically account for the trend, although other findings rule it out as a satisfactory explanation. No evidence was found for increased self-reported noise sensitivity. The results are of importance to the applicability of current exposure-annoyance relationships for aircraft noise and provide a basis for decisions on whether these need to be updated.