Development of a simultaneous analytical method for selected anorectics,methamphetamine, MDMA,and their metabolites in hair using LC-MS/MS to prove anorectics abuse

Owing to the tight control of methamphetamine, it is presumed that phentermine, an amphetamine-type anorectic, has recently been considered a supplement for methamphetamine abusers in Korea. In addition, the abuse of other anorectics obtained by inappropriate means has become a social issue. Hair is a useful specimen to prove chronic drug use. Therefore, an analytical method for the simultaneous detection of phentermine, phendimetrazine, amfepramone, fenfluramine, mazindol, methamphetamine, and 3,4-methylenedioxymethamphetamine (MDMA), as well as their metabolites, which covers the major amphetamines and anorectic agents in Korea, in hair was established and validated using liquid chromatography–tandem mass spectrometry (LC-MS/MS). The drugs and their metabolites in hair were extracted using 1 % HCl in methanol and then filtered and analyzed by LC-MS/MS with electrospray ionization in positive mode. The validation results for selectivity, linearity, matrix effect, recovery, process efficiency, intra- and interassay precision and accuracy, and processed sample stability were satisfactory. The limits of detection ranged from 0.025 to 1 ng/10 mg hair and the limits of quantification were 0.25 ng/10 mg hair for every analyte except mazindol and phentermine, for which they were 10 ng/10 mg hair. The method was successfully applied for the segmental determination of selected anorectics, methamphetamine, MDMA, and their metabolites in hair from 39 drug suspects. Among the anorectics, phentermine and/or phendimetrazine were identified with or without methamphetamine in the hair samples. Closer supervision of the inappropriate use of anorectics is necessary. Also, hair analysis is useful for monitoring the abuse potential of unnoticed drugs.     

Dipodal fluorescent chemosensor for Cu and resultant complex as a chemosensor for iodide

A dipodal receptor was synthesized by condensation of isophthalaldehyde and p-toluenesulfonylhydrazide. The receptor was found to be selective for Cu²⁺ recognition in CH₃CN. The resultant Cu²⁺ receptor complex selectively recognized iodide through cation displacement assay in a CH₃CN/H₂O (8:2, v/v) solvent system.     

Amide-based nonheme cobalt(III) olefin epoxidation catalyst: partition of multiple active oxidants Co(V)=O, Co(IV)=O, and Co(III)-OO(O)CR

A mononuclear nonheme cobalt(III) complex of a tetradentate ligand containing two deprotonated amide moieties, [Co(bpc)Cl(2)][Et(4)N] (1; H(2)bpc = 4,5-dichloro-1,2-bis(2-pyridine-2-carboxamido)benzene), was prepared and then characterized by elemental analysis, IR, UV/Vis, and EPR spectroscopy, and X-ray crystallography. This nonheme Co(III) complex catalyzes olefin epoxidation upon treatment with meta-chloroperbenzoic acid. It is proposed that complex 1 shows partitioning between the heterolytic and homolytic cleavage of an O-O bond to afford Co(V)=O (3) and Co(IV)=O (4) intermediates, proposed to be responsible for the stereospecific olefin epoxidation and radical-type oxidations, respectively. Moreover, under extreme conditions, in which the concentration of an active substrate is very high, the Co-OOC(O)R (2) species is a possible reactive species for epoxidation. Furthermore, partitioning between heterolysis and homolysis of the O-O bond of the intermediate 2 might be very sensitive to the nature of the solvent, and the O-O bond of the Co-OOC(O)R species might proceed predominantly by heterolytic cleavage, even in the presence of small amounts of protic solvent, to produce a discrete Co(V) ?O intermediate as the dominant reactive species. Evidence for these multiple active oxidants was derived from product analysis, the use of peroxyphenylacetic acid as the peracid, and EPR measurements. The results suggest that a less accessible Co(V)=O moiety can form in a system in which the supporting chelate ligand comprises a mixture of neutral and anionic nitrogen donors.     

Adenovirus adenine nucleotide translocator-2 shRNA effectively induces apoptosis and enhances chemosensitivity by the down-regulation of ABCG2 in breast cancer stem-like cells

Cancer stem cells (CSCs) are resistant to chemo- and radio-therapy, and can survive to regenerate new tumors. This is an important reason why various anti- cancer therapies often fail to completely control tumors, although they kill and eliminate the bulk of cancer cells. In this study, we determined whether or not adenine nucleotide translocator-2 (ANT2) suppression could also be effective in inducing cell death of breast cancer stem-like cells. A sub-population (SP; CD44+/ CD24-) of breast cancer cells has been reported to have stem/progenitor cell properties. We utilized the adeno- ANT2 shRNA virus to inhibit ANT2 expression and then observed the treatment effect in a SP of breast cancer cell line. In this study, MCF7, MDA-MB-231 cells, and breast epithelial cells (MCF10A) mesenchymally-transdifferentiated through E-cadherin knockdown were used. ANT2 expression was high in both stem-like cells and non-stem-like cells of MCF7 and MDA-MB-231 cells, and was induced and up-regulated by mesenchymal transdifferentiation in MCF10A cells (MCF10A(EMT)). Knockdown of ANT2 by adeno-shRNA virus efficiently induced apoptotic cell death in the stem-like cells of MCF7 and MDA-MB-231 cells, and MCF10A(EMT). Stem-like cells of MCF7 and MDA-MB-231, and MCF10A(EMT) cells exhibited increased drug (doxorubicin) resistance, and expressed a multi-drug resistant related molecule, ABCG2, at a high level. Adeno-ANT2 shRNA virus markedly sensitized the stem-like cells of MCF7 and MDA-MB-231, and the MCF10A(EMT) cells to doxorubicin, which was accompanied by down-regulation of ABCG2. Our results suggest that ANT2 suppression by adeno-shRNA virus is an effective strategy to induce cell death and increase the chemosensitivity of stem-like cells in breast cancer.     

Dual‐curable fluorinated poly(methacrylate) copolymers for optical adhesives

In pursuit of photo‐curable adhesive for optical communication, dual‐curable acrylic oligomers (AOs) having alkoxy silane group, fluorine atoms and vinyl group as a pendent group were synthesized by two‐stage reactions. The isocyanate group containing oligomers were firstly synthesized via radical polymerization of acrylic monomers, and followed by urethane reaction with 2‐hydroxy ethyl methacrylate. The dual curing behaviors, e.g. thermal and photo‐cure, were studied by using photo‐differential scanning calorimetry (DSC) and real‐time IR. An optimum adhesive formulation, based on AO (15 g), epoxy acrylate (80 g), isobonyl methacrylate (17 g) and photo‐initiator (3 g), was obtained. As the content of AO was increased in the optical adhesive formulation, refractive index decreased but transmittance increased due to the increase in fluorine content. The optical transmittance at the range of 1.3 to 1.55 μm was higher than 90%. The addition of colloidal silica with the earlier mentioned formulation was helpful in decreasing crosslinking volume shrinkage and the increasing of glass fiber adhesion. The required properties for the optical adhesive, including chemical resistance and thermal resistance, dimension stability, etc. were also investigated. Copyright © 2005 John Wiley & Sons, Ltd.     

Catalytic degradation of polystyrene using HUSY catalysts

Summary The addition of carbon dioxide to phenyl glycidyl ether (PGE) was investigated in a semi-batch reactor using immobilized quaternary ammonium chloride catalysts. Five different catalysts were prepared with the following supports : (1) soluble poly(ST-<Emphasis Type=Italic>co</Emphasis>-VBC) [C1], (2) insoluble poly(ST-DVB-VBC) [C2], (3) macroporous poly(ST-DVB-VBC) [C3], (4) poly(ST-<Emphasis Type=Italic>co</Emphasis>-VBC)-MMT [C4] (5) modified MCM-41 [C5]. The addition of carbon dioxide to PGE can be considered as a pseudo-first order process with respect to the concentration of PGE. The pseudo-first order rate constant for the catalysts decreased in the series C1&gt;C3&gt;C2&gt;C4&gt;C5. The activation energy for C1 to C5 catalysts was 8.6, 20.9, 19.9, 23.9, and 26.8 kJ/mol, respectively. The immobilized catalysts can be reused in least 4 successive runs without any considerable loss of their initial reactivities.     

Effect of Molecular Structure on Complexation Between Acidic- and Basic-Polypeptides in Solution

Abstract

Interpolymer complex formation between basic polypeptides, poly(L- proline) Form I [PLP(I)], Form II [PLP(II)] and poly-4-hydroxy-L-proline (PHLP), and acidic polypeptides, poly(L-glutamic acid) (PLGA), poly(D- glutamic acid) (PDGA) and poly(L-aspartic acid) (PLAA), has been studied in water-methanol (1:2 v/v) mixed-solvent by viscometry, potentiometry, light scattering and circular dichroism (CD) measurements. It has been found that polymer complexes between basic- and acidic- polypeptides are formed via hydrogen bonding with a stoichiometric ratio of basic/acidic polypeptides =1:2 (in unit mole ratio) and that PLP(II) forms polymer complex more favorably with PLGA than with PLAA, and the complex of PLP(II) with PLGA is also more favorable than the complex formation of PHLP with PLGA. In addition, the complex formation is highly dependent on the conformation, especially the optical structure of the component polymers, i.e., the stereoselective complexation is observed. The PLGA having a right-handed helix at pH 3.2 formed the complex favorably and quickly with left-handed helix PLP(II), whereas PDGA having a left-handed helix at pH 3.2 favorably formed the complex with right-handed helix PLP(I).